欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料科学与工程学报
  4. 三维编织复合材料理论研究进展

材料科学与工程学报, 2006, 24(4): 631-636. doi: 10.3969/j.issn.1673-2812.2006.04.041

三维编织复合材料理论研究进展

马文锁 1, , 赵允岭 2, , 冯伟 3,

1.焦作大学机电工程系,河南,焦作,454003

2.焦作大学机电工程系,河南,焦作,454003

3.上海大学上海市应用数学和力学研究所,上海,200072

基金项目:   河南省教育厅自然科学基金(200511522003)  

关键词： 三维编织复合材料 , 几何模型 , 性能研究

Progressing in the Research on 3D Braided Composites

有关三维编织复合材料的理论分析研究归纳为:基于细观结构几何模型的物理性能研究和力学性能研究两部分.纤维体积分数是物理性能研究的最主要参数,力学分析以复合材料的弹性性能为主.合理的几何模型决定了力学性能分析与试验结果的一致性.建立在代表性体积单元尺度的几何模型应用最为广泛,得到了力学性能的试验验证.三维编织复合材料的力学性能的数值仿真主要以有限元方法为主,然而仅仅依赖于对其弹性性能的研究结果还远远不能满足三维编织复合材料作为关键结构部件的使用要求,建立完善的断裂准则是编织复合材料大量使用的理论依据.特殊形状的一次性编织复合材料的力学性能研究有待进一步深入.

参考文献

[1] Mouritz A P .Review of applications for advanced three-dimensional fiber textile composites[J].Composites Part A:Applied Science and Manufacturing,1999,30:1445-1461.
[2] Crane R M;Macander A B .[J].Naval Engineers Journal,1984,96(06):52-56.
[3] 张美忠,李贺军,李克智.三维编织复合材料的力学性能研究现状[J].材料工程,2004(02):44-48.
[4] 梁军,陈晓峰,庞宝君,杜善义.多向编织复合材料的力学性能研究[J].力学进展,1999(02):197.
[5] 陶肖明;冼杏娟;高冠勋.纺织结构复合材料[M].北京:科学出版社,2001:1-9.
[6] Ko F K .Braiding Engineering Materials Handbook[Z].ASM International,1987.
[7] Brown R T;Crow E Jr.Automatic through the thickness braiding[A].,1992:832-842.
[8] Ko F K;Pastore C M.Structure and properties of integrated 3D fabric for structural composites[A].Philadelphia:American Society for Testing Material,1985:428-439.
[9] Ma C L;Yang J M;Chou T W.Elastic stiffness of threedimensional braided textile structural composites[A].Philadelphia:American Society for Testing Material,1986:404-421.
[10] Yang J M;Ma Chang-Long;Chou T W.[J].Journal of Composite Materials,1986(20):472-483.
[11] Du G W;Ko F K .[J].Journal of Reinforced Plastics and Composites,1993,12(07):752-768.
[12] 吴德隆;郝照平.[J].宇航学报,1993(03):13-16.
[13] Wang Y Q;Wang A S D .[J].Composites Science and Technology,1995,53:213-232.
[14] Wang Y Q;Wang A S D .[J].Composites Science and Technology,1995,54:359-370.
[15] Byun J H;Chou T W .[J].Composites Science and Technology,1996,56:235-251.
[16] Pandey R;Hahn H T .[J].Composites Science and Technology,1996,56:161-170.
[17] 韩其睿;李嘉禄;李学明 .[J].复合材料学报,1996,13(03):76-80.
[18] L.Chen X.M.Tao C.L.Choy .Mechanical analysis of 3-D braided composites by the finite multiphase element method[J].Composites science and technology,1999(16):2383-2391.
[19] Chen L;Tao X M;Choy C L .On the micro-structure of three-dimensional braided performs[J].Composites Science and Technology,1999,59:391-404.
[20] 庞宝君,杜善义,韩杰才.三维四向编织复合材料细观组织及分析模型[J].复合材料学报,1999(03):135-139.
[21] 徐孝诚;孙德海;黄小平.三维编织复合材料细观结构的几何学分析[J].强度与环境,1999(02):3743.
[22] 黄小平,孙良新,徐孝诚.复合材料三维四向矩形编织物角柱结构研究[J].复合材料学报,2001(04):11-16.
[23] 黄小平,孙良新,徐孝诚.四向矩形编织复合材料单胞的新划分方法[J].纤维复合材料,2001(03):15-17.
[24] Makiko Tada;Tadashi Uozumi;Asami Nakai .Structure and machine braiding procedure of coupled square braids with various cross sections[J].Composites. Part A, Applied science and manufacturing,2001(10):1485-1489.
[25] Wang Y Q;Wang A S D .[J].Composites Science and Technology,1994,51:575-586.
[26] Wang Y Q;Wang A S D .[J].American Society of Mechanical Engineers,1995,56:151-166.
[27] Wang Y Q;Wang A S D .[J].Applied Composite Materials,1997,41:121-132.
[28] 陈利,李嘉禄,李学明.三维四步法圆型编织结构分析[J].复合材料学报,2003(02):76-80.
[29] 马文锁,冯伟.三维管状编织复合材料及其构件可变微单元几何分析模型[J].复合材料学报,2005(05):162-171.
[30] 冯伟,马文锁.编织几何结构的群论分析[J].科学通报,2005(20):2300-2304.
[31] Ko F K.Tensile strength and modulus of a three-dimensional braid composite[A].Philadelphia:American Society for Testing Material,1986:392-403.
[32] Macander A B;Crane R M;Camponesch i E T.Fabrication and mechanical properties of multi-dimensionally (X-D)braided composite materials[A].Philadelphia:STP893,A STM,1986:422-443.
[33] Yau S S;Chou T W;Ko F K .[J].Composites,1986,3(17):227-232.
[34] Surya R K;Abdel A .[J].Journal of Composite Materials,1996,8(30):885-905.
[35] Shivakumar K N;Emehel T C;Awa V S et al.Compression strength and failure mechanisms of 3D textile composites[R].AIAA-95-1159.New York:AIAA,1995.
[36] 李嘉禄;肖丽华;董孚允 .[J].复合材料学报,1996,13(03):71-75.
[37] 孙慧玉;吴长春 .[J].实验力学,1997,12(03):335-341.
[38] 卢子兴,冯志海,寇长河,刘振国,陆萌,麦汉超,唐国翌.编织复合材料拉伸力学性能的研究[J].复合材料学报,1999(03):129-134.
[39] 刘振国,卢子兴,陆萌,麦汉超,冯志海.三维四向编织复合材料剪切性能的数值预报[J].复合材料学报,2000(02):66-69.
[40] 卢子兴,刘振国,麦汉超,陈作荣.三维编织复合材料强度的数值预报[J].北京航空航天大学学报,2002(05):563-565.
[41] 庞宝君;杜善义;严勇 等.三维四向碳-环氧编织复合材料剪切力学性能实验研究[J].实验力学,1999,14(02):209-215.
[42] 庞宝君,杜善义,韩杰才,赫晓东,严勇.三维四向编织碳/环氧复合材料实验研究[J].复合材料学报,1999(04):136-141.
[43] 梁军 .三维编织复合材料力学性能的细观研究[D].哈尔滨工业大学,1996.
[44] 梁军;杜善义;韩杰才 .[J].复合材料学报,1997,14(01):101-107.
[45] Lei C;Cai Y J;Ko F K .[J].Advances in Engineering Software,1992,14:187-194.
[46] Surya R;Kalidindi;Eric Franco .[J].Composites Science and Technology,1997,57:191-305.
[47] L.Chen X.M.Tao C.L.Choy .Mechanical analysis of 3-D braided composites by the finite multiphase element method[J].Composites science and technology,1999(16):2383-2391.
[48] Zeng Tao;Wu Lin-zhi;Guo Li-cheng .Mechanical analysis of 3D braided composites:a finite element model[J].Computers and Structures,2004,64:399-404.
[49] 刘振国,陆萌,麦汉超,卢子兴,冯志海.三维四向编织复合材料弹性模量数值预报[J].北京航空航天大学学报,2000(02):182-185.
[50] 刘振国,卢子兴,陆萌,麦汉超,冯志海.三维四向编织复合材料剪切性能的数值预报[J].复合材料学报,2000(02):66-69.
[51] Tang Z X;Postle R .Mechanics of three-dimensional braided structures for composite materials:Prediction of the elastic moduli[J].Computers and Structures,2001,51:451-457.
[52] Tang Z;Postle X R .Mechanics of three-dimensional braided structures for composite materials A:Nonlinear finite element deformation analysis[J].Computers and Structures,2001,51:451-457.
[53] Tang Z X;Postle R .Mechanics of three-dimensional braided structures for composite materials part Ⅰ:fabric structure and fibre volume fraction[J].Computers and Structures,2000,49:451-459.
[54] Tang Z X;Postle R .Mechanics of three-dimensional braided structures for composite materials Part Ⅱ:prediction of the elastic moduli[J].Computers and Structures,2001,51:451-457.
[55] Tang Z X;Postle R .Mechanics of three-dimensional braided structures for composite materials-part Ⅲ:nonlinear finite elemnet deformation analysis[J].Computers and Structures,2002,55:307-317.
[56] 冯淼林,吴长春,孙慧玉.三维均匀化方法预测编织复合材料等效弹性模量[J].材料科学与工程,2001(03):34-37.
[57] Huiyu Sun;Shenglin Di;Nong Zhang;Ning Pan;Changchun Wu .Micromechanics of braided composites via multivariable FEM[J].Computers & structures,2003(20):2021-2027.
[58] 孙颖,李嘉禄,亢一澜.二步法三维编织复合材料弹性性能的有限元法预报[J].复合材料学报,2005(01):108-113.
[59] Pastore C M;Gowayed Y A .[J].Journal of Composites Technology and Research,1994,1(16):32-36.
[60] 梁军;杜善义;韩杰才 .[J].复合材料学报,1997,14(01):101-107.
[61] Gu Bohong .Prediction of the uniaxial tensile curve of 4-step 3-dimensional braided performs[J].Computers and Structures,2004,64:235-241.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net