钛合金因其优异的综合性能受到国内外研究者和使用者的青睐，其基础和应用技术研究的核心是针对“合金成分－工艺－组织－性能”之间关系的研究。以往钛合金的成分设计、工艺－组织－性能间关系的研究都是定性的，获得了良好的结果，并得到了实际应用。“合金成分－工艺－组织－性能”之间的定量关系研究是近几年国内外钛合金研究的一个热点，已取得一定的进展。综述了高强钛合金的成分定量设计、工艺－组织－性能间定量关系建立的研究进展，主要包含高强钛合金成分的定量设计方法、微观组织的定量表征方法、组织与性能定量关系建立、工艺与性能的定量关系建立等，并通过实际验证。
Because of excellent comprehensive properties,titanium alloys draw wide attentions from researchers and us-ers.The key research direction is the relationship among composition,processing,microstructure and properties.The de-sign of composition and the relationship among processing,microstructure and property were qualitativly analyzed in the past,and good results were achieved.In recent years,the quantitative relationships among composition,processing,mi-crostructure and properties were studied,and some results were achieved.This paper interviews the development of quan-titative design of composition for high strength titanium alloy and the research of quantitative relationship among process-ing,microstructure and property,mainly including the quantitative design method of composition for high strength titanium alloy,quantitative characterization for microstructure,quantitative relationship between microstructure and properties and quantitative relationship between processing and properties,and the quantitative relationships,were tested and verified.
参考文献
| [1] | 林成,尹桂丽,刘志林,赵永庆,吴欢,葛鹏.高强钛合金抗拉强度的理论计算[J].稀有金属材料与工程,2010(07):1189-1194. |
| [2] | Cheng Lin;Guili Yin;Yongqing Zhao et al.Analysis of the Effect of Alloy Elements on Martensitic Transformation in Titani-um Alloy with the Use of Valence Electron Structure Parameters[J].Materials Chemistry and Physics,2011,125:411-417. |
| [3] | 赵永庆,曾卫东,林成.钛合金数据库系统的开发、显微组织定量表征及亚稳β钛合金的成分理论设计研究[J].中国材料进展,2009(06):51-55. |
| [4] | Lin Cheng;Liu Zhilin;Zhao Yongqing .Theoretical Research on Phase Transformation in Metastableβ-titanium Alloy[J].Metallur-gical and Materials Transactions A,2009,40A:1049-1058. |
| [5] | 林成;赵永庆;刘志林 .钛合金成分定量设计方法[P].China,ZL200910248943.5,2010-06-30. |
| [6] | 赵永庆;郭萍;林成 .一种 1 600 MPa 级高强钛合金[P].Chian,ZL200910124037.4,2009-08-12. |
| [7] | 赵永庆;郭萍;林成 .一种1 500 MPa级高强钛合金[P].China,ZL200910124038.9,2009-08-15. |
| [8] | Zhao Yongqing;Zeng Weidong;Yu Sun.Quantification of Mi-crostructural Features and Application of Artificial Neural Network in Correlation of Microstructure and Property of Ti-Alloys[A].北京,2011:964-967. |
| [9] | 王凯旋,曾卫东,邵一涛,赵永庆,周义刚.基于体视学原理的钛合金显微组织定量分析[J].稀有金属材料与工程,2009(03):398-403. |
| [10] | 王凯旋,曾卫东,赵永庆,邵一涛,周建华,王晓英,周义刚.钛合金片层α相在热加工过程中演变规律的定量研究[J].稀有金属材料与工程,2010(04):565-569. |
| [11] | Kaixuan Wang;Weidong Zeng;Yongqing Zhao;Yunjin Lai;Yigang Zhou .Dynamic globularization kinetics during hot working of Ti-17 alloy with initial lamellar microstructure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(10/11):2559-2566. |
| [12] | 王凯旋,曾卫东,赵永庆,周义刚.钛合金显微组织与性能定量关系的模型[J].稀有金属材料与工程,2011(05):784-787. |
| [13] | K. X. Wang;W. D. Zeng;Y. Q. Zhao .Flow behaviour and microstructural evolution of Ti-17 alloy with lamellar microstructure during hot deformation in α +βphase field[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2011(1):21-28. |
| [14] | Y. Sun;W.D. Zeng;Y.Q, Zhao;X.M. Zhang;Y. Shu;Y.G. Zhou .Modeling constitutive relationship of Ti40 alloy using artificial neural network[J].Materials & design,2011(3):1537-1541. |
| [15] | Han, Y.;Zeng, W.;Zhao, Y.;Qi, Y.;Sun, Y. .An ANFIS model for the prediction of flow stress of Ti600 alloy during hot deformation process[J].Computational Materials Science,2011(7):2273-2279. |
| [16] | Sun, Y.;Zeng, W.;Han, Y.;Zhao, Y.;Wang, G.;Dargusch, M.S.;Guo, P. .Modeling the correlation between microstructure and the properties of the Ti-6Al-4V alloy based on an artificial neural network[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(29/30):8757-8764. |
| [17] | Yu Sun;Weidong Zeng;Yongqing Zhao;Yitao Shao;Yigang Zhou .Modeling the Correlation of Composition-Processing- Property for TC11 Titanium Alloy Based on Principal Component Analysis and Artificial Neural Network[J].Journal of Materials Engineering and Performance,2012(11):2231-2237. |
| [18] | Y. Sun;W.D. Zeng;Y.Q. Zhao;Y.L. Qi;X. Ma;Y.F. Han .Development of constitutive relationship model of Ti600 alloy using artificial neural network[J].Computational Materials Science,2010(3):686-691. |
| [19] | Han Yuanfei;Zeng Weidong;Zhao Yongqing.Modeling of Constitutive Relationship of Ti-25V-15Cr-0.2Si Alloy during Hot Deformation Process by Fuzzy-Neural Network[J].Materials and Design,2010(31):4380-4385. |
| [20] | Sun Y;Zeng W D;Zhang X M et al.Prediction of TensileProperty of Hydrogenated Ti60 Titanium Alloy using Artificial Neural Network[J].Journal ofMaterials Engineering and Per-formance,2011,20(03):335-340. |
| [21] | Y.F. Han;W.D. Zeng;Y.Q, Zhao;Y. Sun;X. Ma .A study on the prediction of mechanical properties of titanium alloy based on adaptive fuzzy-neural network[J].Materials & design,2011(6):3354-3360. |
| [22] | 孙宇,曾卫东,赵永庆,邵一涛,韩远飞,马雄.基于BP神经网络的TC11钛合金工艺-性能模型预测[J].稀有金属材料与工程,2011(11):1951-1955. |
| [23] | Sun, Y.;Zeng, W.;Han, Y.;Ma, X.;Zhao, Y.;Guo, P.;Wang, G.;Dargusch, M.S..Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network[J].Computational Materials Science,2012:239-244. |
| [24] | Han Yuanfei;Zeng Weidong;Zhang Xueming et al.Modelling the Relationship between Hydrogen Content and Mechanical Prop-erty of Ti600 Alloy by Using ANFIS[J].Applied Mathematical Modeling,2013,37(08):5705-5714. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%