欢迎登录材料期刊网

材料期刊网

高级检索

超高温材料是航天飞行器长时飞行、大气层再入飞行和跨大气层飞行不可或缺的关键材料,其直接影响了航天飞行器的研制进程并对飞行试验的成败起到了至关重要的作用.综述了C/C复合材料、陶瓷基复合材料、碳化物超高温陶瓷、硼化物超高温陶瓷及氮化物超高温陶瓷等超高温材料近年来的最新研究成果,重点评述了C/C复合材料的组织形成机理、疲劳特性、基体改性及抗氧化行为,Cf/SiC及SiCf/SiC陶瓷基复合材料和超高温陶瓷在制备工艺、力学性能、抗氧化和抗烧蚀等方面的国内外研究现状,探讨了常用儿种超高温材料的优缺点并分析了其研究重点,提出了超高温材料当前研究中存在的主要问题,指出 了超高温材料未来的研究目标和发展方向.

参考文献

[1] Guellali M;Oberacker R;Hoffmann MJ .Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated carbon fiber felts[J].Carbon: An International Journal Sponsored by the American Carbon Society,2005(9):1954-1960.
[2] Xu Guozhong;Li Hejun;Bai Ruicheng et al.Influence of the Matrix Texture on the Fracture Behavior of 2D Carbon/Carbon Composites[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,478(1-2):319-323.
[3] Bokros J C .The Structure of Pyrolytic Carbon Deposited in a Fluidized Bed[J].CARBON,1965,3(01):17-29.
[4] Price R J;Bokros J C;Koyama K .Structure and Properties of Pyrolytic Carbons Prepared in a Fluidized Bed between 1900℃ and 2400℃[J].CARBON,1966,4(02):263-272.
[5] Lieberman M L;Pierson H O .Effect of Gas Phase Conditions on Resultant Matrix Pyrocarbons in Carbon/Carbon Composites[J].CARBON,1974,12(03):233-241.
[6] Pierson H O;Lieberman M L .The Chemical Vapor Deposition of Carbon on Carbon Fibers[J].CARBON,1975,13(03):159-166.
[7] Langlais F;Naslain R;Thebault J;Feron O .On kinetic and microstructural transitions in the CVD of pyrocarbon from propane[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(9):1343-1353.
[8] J.Lavenac;F.Langlais;O.Feron .Microstructure of the pyrocarbon matrix in carbon/carbon composites[J].Composites science and technology,2001(3):339-345.
[9] Bourrat X;Lavenac J;Anglais F et al.The Role of Pentagons in the Growth of Laminar Pyrocarbon[J].CARBON,2001,39(15):2376-2380.
[10] Bouchard E;Lavenac J;Roux J C et al.Pyrocarbon Deposits on a Graphite Surface Observed by STM[J].Chemical Vapor Deposition,2001,7(03):125-130.
[11] Zhang WG.;Hu ZJ.;Huttinger KJ. .Chemical vapor infiltration of carbon fiber felt: optimization of densification and carbon microstructure[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(14):2529-2545.
[12] FanZ Q;Tan R X;He K J et al.Preparation and Mechanical Properties of Carbon Fibers with Isotropic Pyrolytic Carbon Core by Chemical Vapor Deposition[J].CHEMICAL ENGINEERING JOURNAL,2015,272(01):12-16.
[13] Ken Gota;Hiroshi Hatta;Daisuke Katsu;Terufumi Machida .Tensile fatigue of a laminated carbon-carbon composite at room temperature[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(6):1249-1255.
[14] 杨茜,李贺军,虞跨海,张守阳.应力水平对二维炭/炭复合材料疲劳行为的影响[J].中国有色金属学报(英文版),2013(07):2135-2140.
[15] Wajed Zaman,李克智,李伟,Hira Zaman,Khurshid Ali.弯曲疲劳后4D-C/C复合材料的抗弯强度及热膨胀性能[J].新型炭材料,2014(03):169-175.
[16] Liao Xiaoling;Li Hejun;Xu Wenfeng et al.Effects of Tensile Fatigue Loads on Flexural Behavior of 3D Braided C/C Composites[J].Composites Science and Technology,2008,68(02):333-336.
[17] Xue Lizhen;Li Kezhi;Jia Yan et al.Flexural Fatigue Behavior of 2D Cross-Ply Carbon/Carbon Composites at Room Temperature[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2015,634:209-214.
[18] Ken Goto;Yuko Furukawa;Hiroshi Hatta .Fatigue behavior of 2D laminate C/C composites at room temperature[J].Composites science and technology,2005(7/8):1044-1051.
[19] Murdani A;Makabe C;Fujikawa M et al.Fatigue and Fracture Behavior in Notched Specimens of C/C Composite with Fine-Woven Carbon Fiber Laminates[J].CARBON,2009,47(14):3355-3364.
[20] Liao XL;Li HJ;Xu WF;Li KZ .Study on the thermal expansion properties of C/C composites[J].Journal of Materials Science,2007(10):3435-3439.
[21] 杨晓辉,卢锦花,李克智,张守阳,杨茜,曾燮榕.弯-弯疲劳加载对2D-C/C复合材料热膨胀性能的影响[J].固体火箭技术,2012(05):665-669.
[22] Luo Wenfei;Fu Yewei;Zhang Shouyang et al.Effects of Different Loading Methods on Thermal Expansion Behaviors of 2D CrossPly Carbon/Carbon Composites from 850℃ C to 2300℃ C[J].Ceramics International,2014,40(8,Part A):12545-12551.
[23] Xue Lizhen;Li Kezhi;Zhang Shouyang et al.Monitoring the Damage Evolution of Flexural Fatigue in Unidirectional Carbon/Carbon Composites by Electrical Resistance Change Method[J].International Journal of Fatigue,2014,68:248-252.
[24] Cheng Jing;Li Hejun;Zhang Shouyang et al.Internal Friction Behavior of Unidirectional Carbon/Carbon Composites after Different Fatigue Cycles[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2014,600:129-134.
[25] 刘春轩,陈建勋,苏哲安,杨鑫,曹柳絮,黄启忠.碳化锆陶瓷先驱体裂解机理及PIP法制备C/C-ZrC复合材料[J].中国有色金属学报(英文版),2014(06):1779-1784.
[26] Wang Song;Zhu Yulin;Chen Hongmei et al.Effects of Carbon Matrix on Microstructure and Properties of 3-D C/ZrC Composites Prepared by Reactive Melt Infiltration[J].Ceramics International,2014,40(05):7307-7314.
[27] Li Q G;Zhou H J;Dong S M et al.Fabrication and Comparison of 3D Cf/ZrC-SiC Composites Using ZrC Particles/Polycarbosilane and ZrC Precursor/Polycarbosilane[J].Ceramics International,2012,38(06):5271-5275.
[28] Wang Yiguang;Zhu Xiaojuan;Zhang Litong et al.C/C-SiC-ZrC Composites Fabricated by Reactive Melt Infiltration with Si0 87Zr0.13 Alloy[J].Ceramics International,2012,38(05):4337-4343.
[29] Feng Bo;Li Hejun;Zhang Yulei et al.Effect of SiC/ZrC Ratio on the Mechanical and Ablation Properties of C/C-SiC-ZrC Composites[J].Corrosion Science,2014,82:27-35.
[30] Tong Yonggang;Bai Shuxin;Ye Yicong et al.Reactive Melt Infiltration of a ZrB2 Modified C/ZrC Composite by a Eutectic Zr-B Alloy[J].Materials Letters,2015,138(01):208-211.
[31] Huang Dong;Zhang Mingyu;Huang Qizhong et al.Ablation Mechanism of C/C-ZrB2-ZrC-SiC Composite Fabricated by Polymer Infiltration and Pyrolysis with Preform of Cf/ZrB2[J].Corrosion Science,2015,19(02):22-27.
[32] Hu Chenglong;Pang Shengyang;Tang Sufang et al.Ablation and Mechanical Behavior of a Sandwich-Structured Composite with an Inner Layer of Cf/SiC between Two Outer Layers of Cf/SiC-ZrB2-ZrC[J].Corrosion Science,2015,80:154-163.
[33] Liu Lei;Li Hejun;Feng Wei et al.Ablation in Different Heat Fluxes of C/C Composites Modified by ZrB2-ZrC and ZrB2-ZrC-SiC Particles[J].Corrosion Science,2013,74:159-167.
[34] Xue Liang;Su Zhean;Yang Xin et al.Microstructure and Ablation Behavior of C/C-HfC Composites Prepared by Precursor Infiltration and Pyrolysis[J].Corrosion Scienee,2015,94:165-170.
[35] Li Shuping;Li Kezhi;Du Hongying et al.Effect of Hafnium Carbide Content on the Ablative Performance of Carbon/Carbon Composites as Rocket Throats[J].CARBON,2013,51(04):437-438.
[36] Li Hejun;Yao Dongjia;Fu Qianggang et al.Anti-Oxidation and Ablation Properties of Carbon/Carbon Composites Infiltrated by Hafnium Boride[J].CARBON,2013,52:418-426.
[37] Erica L. Corral;Ronald E. Loehman .Ultra-High-Temperature Ceramic Coatings for Oxidation Protection of Carbon-Carbon Composites[J].Journal of the American Ceramic Society,2008(5):1495-1502.
[38] Nathan S.Jacobson;Donald M.Curry .Oxidation microstructure studies of reinforced carbon/carbon[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(7):1142-1150.
[39] 李贺军,薛晖,付前刚,张雨雷,史小红,李克智.C/C复合材料高温抗氧化涂层的研究现状与展望[J].无机材料学报,2010(04):337-343.
[40] 付前刚,张佳平,李贺军.抗烧蚀C/C复合材料研究进展[J].新型炭材料,2015(02):97-105.
[41] Federico Smeacetto;Monica Ferraris;Milena Salvo .Multilayer coating with self-sealing properties for carbon-carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(11):2105-2111.
[42] Fu Qiangang;Li Hejun;Li Kezhi et al.A SiC/Glass Oxidation Protective Coating for Carbon/Carbon Composites for Application at 1173K[J].CARBON,2007,45(04):892-894.
[43] Fu QG;Li HJ;Shi XH;Li KZ;Wang C;Huang M .Double-layer oxidation protective SIC/glass coatings for carbon/carbon composites[J].Surface & Coatings Technology,2006(11):3473-3477.
[44] F. Qian-Gang;L. He-Jun;S. Xiao-Hong .Oxidation protective glass coating for SiC coated carbon carbon composites for application at 1773 K[J].Materials Letters,2006(3):431-434.
[45] Huang Jianfeng;Zhang Yulei;Zhu Kongjun et al.Microstructure and Oxidation Protection of Borosilicate Glass Coating Prepared by Pulse Arc Discharge Deposition for C/C Composites[J].Ceramics International,2015,41(03):4662-4667.
[46] 付前刚,李贺军,黄剑锋,史小红,史波,李克智.炭/炭复合材料磷酸盐涂层的抗氧化性能研究[J].材料保护,2005(03):52-54.
[47] Fang Haitao;Zhu Jingchuan;Yin Zhongda et al.A Si-Mo Fused Slurry Coating for Oxidation Protection of Carbon-Carbon Composites[J].Journal of Matedals Science Letters,2001,20(02):175-177.
[48] Zhang Yulei;Li Hejun;Fu Qiangang et al.A Si-Mo Oxidation Protective Coating for C/SiC Coated Carbon/Carbon Composites[J].CARBON,2008,45(05):1130-1133.
[49] Qian-Gang Fu;He-Jun Li;Ke-Zhi Li .A Si-Mo-W Coating to Protect SiC-Coated Carbon/Carbon Composites Against Oxidation[J].Journal of the American Ceramic Society,2009(9):2132-2135.
[50] Zhang Yulei;Li Hejun;Yao Xiyuan et al.Oxidation Protection of C/SiC Coated Carbon/Carbon Composites with Si-Mo Coating at High Temperature[J].Corrosion Science,2011,53(06):2075-2079.
[51] Zhang Yulei;Li Hejun;Hu Zhixiong et al.Microstructure and Oxidation Resistance of Si-Mo-B Coating for C/SiC Coated Carbon/ Carbon Composites[J].Corrosion Science,2013,72:150-155.
[52] [OL].http://blog.sina.com.cn/s/blog_ 4e66996d0100bcll.html
[53] Zhao J;Guo QG;Shi JL;Zhai GT;Liu L .SiC/Si-MoSi2 oxidation protective coatings for carbon materials[J].Surface & Coatings Technology,2006(3/4):1861-1865.
[54] 冉丽萍,易茂中,蒋建献,葛毅成.炭/炭复合材料MoSi2/SiC高温抗氧化复合涂层的制备及其结构[J].新型炭材料,2006(03):231-236.
[55] Ren Xuanru;Li Hejun;Fu Qiangang et al.TaxHf1-xB2-SiC Multiphase Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites[J].Corrosion Science,2014,87:479-488.
[56] Zhu YC;Sato Y;Iwamoto N;Ohtani S. - .Formation of a functionally gradient (Si sub 3 N sub 4 +SiC)/C layer for the oxidation protection of carbon-carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(9):1417-1423.
[57] Zhang YL;Li HJ;Fu QG;Li KZ;Wei J;Wang PY .A C/SiC gradient oxidation protective coating for carbon/carbon composites[J].Surface & Coatings Technology,2006(6):3491-3495.
[58] He-Jun Li;Yu-Lei Zhang;Qian-Gang Fu .Oxidation behavior of SiC nanoparticle-SiC oxidation protective coating for carbon/carbon composites at 1773 K[J].Carbon: An International Journal Sponsored by the American Carbon Society,2007(13):2704-2707.
[59] Zhang Yulei;Li Hejun;Fu Qiangang et al.High Performance SiC Oxidatim Protective Coating with ZrO2 Particle Dispersion for Carbon/Carbon Composites[J].Advancde Engineering Materials,2008(10):986-989.
[60] L. He-Jun;F. Qian-Gang;S. Xiao-Hong .SiC whisker-toughened SiC oxidation protective coating for carbon/carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(3):602-605.
[61] Fu Qian-Gang;Li He-Jun;Li Ke-Zhi .SiC whisker-toughened MoSi_2-SiC-Si coating to protect carbon/carbon composites against oxidation[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(9):1866-1869.
[62] Chu Yanhui;Fu Qiangang;Li Hejun et al.Effect of SiC Nanowires on the Mechanical and Oxidation Protective Ability of SiC Coating for C/C Composites[J].Journal of the American Ceramic Society,2012,95(02):739-745.
[63] Chu Yanhui;Li Hejun;Li Lu et al.Oxidation Protection of C/C Composites by Uhra Long SiC Nanowire-Reinforced SiC-Si Coating[J].Corrosion Science,2014,84:204-208.
[64] Zhang Yulei;Ren Jincui;Tian Song et al.HfC Nanowire-Toughened TaSi2-TaC-SiC-Si Muhiphase Coating for C/C Composites against Oxidation[J].Corrosion Science,2015,90:554-561.
[65] Li HB;Zhang LT;Cheng LF;Wang YG;Yu ZJ;Huang MH;Tu HB;Xia HP .Polymer-ceramic conversion of a highly branched liquid polycarbosilane for SiC-based ceramics[J].Journal of Materials Science,2008(8):2806-2811.
[66] Hui Mei;Laifei Cheng .Thermal Cycling Response Behavior of Ceramic Matrix Composites under Lo ad and Displacement Constraints[J].Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2008,486(1-2):235-240.
[67] Zhen Wang;Shaoming Dong;Ping He .Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler[J].Journal of the European Ceramic Society,2010(3):787-792.
[68] Zhu Yunzhou;Zhu Shuzhen;HuangZhengren et al.Properties and Microstructure of KD-I/SiC Composites by Combined Process of CVI/RB/PIP[J].Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2008,477(1-2):198-203.
[69] Haijun Zhou;Shaoming Dong;Yusheng Ding;Zhen Wang;Dingxing Wu .Friction and Wear Properties of 3D Carbon/Silicon Carbide Composites Prepared by Liquid Silicon Infiltration[J].Tribology letters,2010(2):337-341.
[70] Ma Yan;Wang Song;Chen Zhaohui .Effects of High-Temperature Annealing on the Microstructures and Mechanical Properties of Cf/ SiC Composites Using Polycarbosilane[J].Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2011,528(7-8):3069-3072.
[71] Xie Yupeng;Cheng Laifei;Li Liangjun et al.Fabrication of Laminated SiCw/SiC Ceramic Composites by CVI[J].Journal of the European Ceramic Society,2013,33(10):1701-1706.
[72] Li Liangjun;Cheng Laifei;Fan Shangwu et al.A Novel Fabrication Approach for Impact Resistance Laminated Ceramics[J].Materials and Design,2015,79:26-31.
[73] Li Liangjun;Cheng Laifei;Fan Shangwu.Fabrication and Properties of Zr/SiC and Zr/Si3 N4 Laminated Composites[M].,2014:99-103.
[74] Li Liangjun;Cheng Laifei;Fan Shangwu et al.Fabrication and Dynamic Compressive Response of Laminated ZrO-Zr2 CN/Si3 N4 Ceramics[J].Ceramics Intermtional,2015,41(07):8584-8591.
[75] Zuo Fengjuan;Cheng Laifei;Xiang Liuyi et al.Ablative Property of Laminated ZrB2-SiC Ceramics under Oxyacetylene Torch[J].Ceramics International,2013,39(04):4627-4631.
[76] Xiang Liuyi;Cheng Laifei;Fan Xiaomeng et al.Effect of Interlayer on the Ablation Properties of Laminated HfC-SiC Ceramics under Oxyacetylene Torch[J].Corrosion Science,2015,93:172-179.
[77] Wang Xingang;Liu Jixuan;Kan Yanmei et al.Effect of Solid Solution Formation on Densification of Hot-Pressed ZrC Ceramics with MC (M =V,Nb,and Ta) Additions[J].Journal of the European Ceramic Society,2012,32(08):1795-1802.
[78] Ma Baoxia;Han Wenbo .Thermal Shock Resistance of ZrC Matrix Ceramics[J].Journal of Refractory Metals and Hard Materials,2010,28:187-190.
[79] Kljajevic L;Nenadovic S;Nenadovic M et al.Spark Plasma Sintering of ZrC-SiC Ceramics with LiYO2 Additive[J].Ceramics International,2013,39:5467-5476.
[80] 刘1]晗 .Effects of Silicon Carbide Addition on Microstructure and Mechanical Properties of Tantalum Carbide Ceramics(碳化硅添加剂对碳化钽陶瓷显微组织及力学性能的影响)[D].Harbin:Harbin Institute of Technology,2013.
[81] 王毅,徐永东,谢翀博,张立同,成来飞.三维针刺C/(SiC-TaC)复合材料的烧蚀性能及烧蚀机理[J].硅酸盐学报,2009(10):1718-1723.
[82] Pienti L;Sciti D;Silvestroni L et al.Ablation Tests on HfC-and TaC-Based Ceramics for Aeropropulsive Applications[J].Journal of the European Ceramic Society,2015,35:1401-1411.
[83] Liu Yixiang;Cheng Laifei;Fan Xiaomeng et al.Effect of Interlayer on the Ablation Properties of Laminated HfC-SiC Ceramics under Oxyacetylene Torch[J].Corrosion Science,2015,93:172-179.
[84] Shugart K;Patterson B;Lichtman D et al.Mechanisms for Variability of ZrB2-30vol% SiC Oxidation Kinetics[J].Journal of the American Ceramic Society,2014,97(07):2279-2285.
[85] He Rujie;Zhang Xinhong;Han Wenbo et al.Effects of Solids Loading on Microstructure and Mechanical Properties of HfB2-20vol% MoSi2 Ultra High Temperature Ceramic Composites through Aqueous Gel Casting Route[J].Materials and Design,2013,47:35-40.
[86] Peng F;Laningham G V;Speyer R F .Thermogravimetric Analysis of the Oxidation Resistance of ZrB2-SiC and ZrB2-SiC-TaB2-Based Compositions in the 1 500 ~ 1 900 ℃ Range[J].Journal of Materials Research,2011,26(01):96-107.
[87] Zapata S E;Jayaseelan D D;Lin H T et al.Mechanical Properties of ZrB2-and HfB2-Based Uhra-High Temperature Ceramics Fabricated by Spark Plasma Sintering[J].Journal of the European Ceramic Society,2013,33(07):1373-1386.
[88] Zou Ji;Zhang Guojun;Hu Chufeng et al.Strong ZrB2-SiC-WC Ceramics at 1 600 ℃[J].Journal of the American Ceramic Society,2012,95(03):874-878.
[89] D. Sciti;G. Bonnefont;G. Fantozzi;L. Silvestroni .Spark plasma sintering of HfB_2 with low additions of silicides of molybdenum and tantalum[J].Journal of the European Ceramic Society,2010(15):3253-3258.
[90] Wang Zhi;Wu Zhanjun;Shi Guodong .The Oxidation Behaviors of a ZrB2-SiC-ZrC Ceramic[J].Solid State Sciences,2011,13(03):534-538.
[91] Lee S J;Back S S;Kang E S et al.Fabrication and Oxidation Behavior of Reactively Hot Pressed TaB2-SiC Ceramics[J].REVIEWS ON ADVANCED MATERIALS SCIENCE,2011,28:21-25.
[92] Lin Jia;Zhang Xinghong;Wang Zhi et al.Microstructure and Mechanical Properties of Hot-Pressed ZrB2-SiC-ZrO2f Ceramics with Different Sintering Temperatures[J].Materials anl Design,2012,34:853-856.
[93] Silvestroni L;Guicciardi S;Melandri C et al.TaB2-Based Ceramics:Microstructure,Mechanical Properties and Oxidation Resistance[J].Journal of the European Ceramic Society,2012,32(01):97-105.
[94] Talmy I G;Zaykoski J A;Opeka M M .Synthesis,Processing and Properties of TaC-TaB2-C Ceramics[J].Jouranal of the European Ceramic Society,2010,30(11):2253-2263.
[95] Ni Dewei;Liu Jixuan;Zhang Guojun .Microstructure Refinement and Mechanical Properties Improvement of HfB2-SiC Composites with the Incorporation of HfC[J].Journal ofthe European CeramicSociety,2012,32(10):2557-2563.
[96] Escobar C;Villarreal M;Caicedo J C et al.Mechanical Properties of Steel Surfaces Coated with HfN/VN Superlattices[J].Journal of Materials Engineering and Peormance,2014,23(11):3963-3974.
[97] Huang H H;Fan Xiaofeng;Hu C Q et al.Transformation of Electronic Properties and Structural Phase Transition from HfN to Hf3N4[J].Journal of Physics-Condensed Matter,2015,27(22):1-7.
[98] Zhou C;Gao X;Xu Y et al.Synthesis and High-Femperature Evolution of Single-Phase Amorphous Si-Hf-N Ceramics[J].Journal of the European Ceramic Society,2015,35(07):2007-2015.
[99] Matsuoka M;Yoshio S;Tatami J et al.Development of CNT-Dispersed Si3 N4 Ceramics by Adding lower Temperature Sintering Aids[J].Journal of the Korean Ceramic Society,2012,39(04):333-336.
[100] Guo Weiming;Wu Lixiang;Ma Ti et al.Chemical Reactivity of Hot-Pressed Si3N4-ZrB2 Ceramics at 1500-1700 ℃[J].Journal of the European Ceramic Society,2015,35(11):2973-2979.
[101] Abrad S;Ludwig T;Herrmann M et al.Crystallisation Studies of Si3 N4-Al2 O3-SiO2-Y2 O3 Glass-Ceramics under Different HeatTreatment Conditions[J].Journal of the European Ceramic Society,2015,35(08):2261-2268.
[102] Li Y X;Han W B;Chen G Q et al.Influence of CeO2 Addition on Si3 N4 Ceramics[J].Materials Research Innocations,2015,19(01):339-342.
[103] Wu B;Wang Z;Dong S M .Improved Oxidation Resistance of SiC-Based Ceramic Matrix Composites by In-Situ Reaction with Si3 N4 Filler[J].Key Engineering Materials,2012,512(01):775-778.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%