采用以ANSYS软件建立的有限元模型对Ti6Al4V合金(O)600 mm铸锭真空自耗电弧熔炼过程中的温度场变化以及熔炼电流对熔池形貌的影响进行了研究,并耦合微观模拟的CAFD模型对铸锭几个特征区域凝固前沿的枝晶生长和V元素溶质偏析进行了模拟.结果表明,熔炼电流的增大使熔池深度和糊状区宽度变大,使熔炼达到稳态的时间提前；熔炼达到稳态时,铸锭中心处形成较短而不是十分连续柱状晶组织,二分之一半径处和边部则形成连续的柱状晶组织.
参考文献
| [1] | Küistner V;Oehring M;Chatterjee A;et al. Kim Y W,Clemens H,Rosenberger A H.Gamma titanium aluminides 2003[M].Warrendale,PA:TMS,2003:89. |
| [2] | R. C. Atwood;P. D. Lee .Simulation of the three-dimensional morphology of solidification porosity in an aluminium-silicon alloy[J].Acta materialia,2003(18):5447-5466. |
| [3] | P. D. LEE;J.D. HUNT .HYDROGEN POROSITY IN DIRECTIONALLY SOLIDIFIED ALUMINIUM-COPPER ALLOYS: A MATHEMATICAL MODEL[J].Acta materialia,2001(8):1383-1398. |
| [4] | P.D. Lee;A. Chirazi;R.C. Atwood;W. Wang .Multiscale modelling of solidification microstructures, including microsegregation and microporosity, in an Al-Si-Cu alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):57-65. |
| [5] | W. Wang;P. D. Lee;M. McLean .A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection[J].Acta materialia,2003(10):2971-2987. |
| [6] | Dong HB;Lee PD .Simulation of the columnar-to-equiaxed transition in directionally solidified Al-Cu alloys[J].Acta materialia,2005(3):659-668. |
| [7] | X.L. Yang;H.B. Dong;W. Wang .Microscale simulation of stray grain formation in investment cast turbine blades[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):129-139. |
| [8] | L. Yuan;P. D. Lee;G. Djambazov;K. Pericleous .Numerical simulation of the effect of fluid flow on solute distribution and dendritic morphology[J].International Journal Cast Metals Research,2009(1/4):204-207. |
| [9] | ZHAO Xiao-hua,LI Jin-shan,YANG Zhi-jun,KOU Hong-chao,HU Rui,ZHOU Lian.Numerical Simulation of Fluid Flow Caused by Buoyancy Forces During Vacuum Arc Remelting Process[J].上海交通大学学报（英文版）,2011(03):272-276. |
| [10] | YANG Zhi-jun,ZHAO Xiao-hua,KOU Hong-chao,LI Jin-shan,HU Rui,ZHOU Lian.Numerical simulation of temperature distribution and heat transfer during solidification of titanium alloy ingots in vacuum arc remelting process[J].中国有色金属学报（英文版）,2010(10):1957-1962. |
| [11] | Kondrashov E N;Musatov M I;Maksimov A Y et al.Calculation of the molten pool depth in vacuum arc remelting of alloy Vt3-1[J].Journal of Engineering Thermophysics,2007,16(01):19-25. |
| [12] | Bellot J;Ablitzer D;Foster B et al.Dissolution of hard-alpha inclusions in liquid titanium alloys[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1997,28(06):1001-1010. |
| [13] | 张颖娟,寇宏超,李鹏飞,钟宏,胡锐,李金山,周廉.真空自耗电弧熔炼TC4铸锭的凝固组织和缩松缩孔的模拟[J].特种铸造及有色合金,2012(05):418-421. |
| [14] | Yajun Liu;Yang Ge;Di Yu .Assessment of the diffusional mobilities in bcc Ti-V alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):176-182. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%