在充分了解油田实际工况的基础上,开发了SEW-110T高抗挤套管,通过力学性能测试、拉伸至失效、静水压至失效及外压至失效等手段测试了SEW-110T套管的性能.结果表明,SEW-110T套管的母材及焊缝区组织在具有高强度的同时,具有较高的韧性和塑性,因此表现出良好的抗拉伸、抗内压、抗挤毁性能.
参考文献
[1] | 李鹤林,张亚平,韩礼红.油井管发展动向及高性能油井管国产化(上)[J].钢管,2007(06):1-6. |
[2] | 李克向.实用完井工程[M].北京:石油工业出版社,2002 |
[3] | 张毅,宋箭平,陈建初.BG11OT抗挤套管的试验研究(上)--残余应力、平均壁厚、屈服厚度对临界抗挤强度的影响[J].钢管,2002(01):13-16. |
[4] | 张毅,宋箭平,陈建初.BG110T抗挤套管的试验研究(下)--残余应力、平均壁厚、屈服强度对临界抗挤强度的影响[J].钢管,2002(02):13-16. |
[5] | 王军,韦奉,王涛,王一岑,张鹏,王亮.高抗挤套管开发现状分析[J].焊管,2013(01):24-28,33. |
[6] | 韩建增 .套管抗挤强度研究[D].成都:西南石油大学,2001. |
[7] | API TR 5C3.Technical report on equations and calculations for casing,tubing,and line pipe used as casing or tubing; and performance properties tables for casing and tubing[S].Washington,API Publications,2008. |
[8] | ASTM E18.Standard Test Methods for Rockwell Hardness of Metallic Materials[S].West Conshohocken,Pa:ASTM International,2012. |
[9] | SY/T 5989.直缝电阻焊套管[S].北京:石油工业出版社,2012. |
[10] | ASTM A370.Standard test methods and definitions for mechanical testing of steel products[S].West Conshohocken,Pa:ASTM International,2012. |
[11] | ASTM E23.Standard test methods for notched bar impact testing of metallic materials[S].West Conshohocken,Pa:ASTM International,2012. |
[12] | API Spec 5C5.Specification for casing and tubing[S].Washington:API Publications,2011. |
[13] | API RP 5C5.Recommended practice on procedures for testing casing and tubing connections[S].Washington:API Publications,2003. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%