以钒钛铁精矿和煤粉为原料,在空气气氛下通过碳热还原法制备Fe-Ti(C,N)复合粉末.通过还原产物X射线衍射分析,对空气气氛下还原温度和配碳量对钒钛铁精矿碳热还原的反应过程以及物相演变进行了研究.结果表明,随着温度的升高,反应过程中的物相演变过程为:Fe3O4→Fe,FeTiO3→FeTi2O5→Ti4O7→Ti2O3→Ti(C,N),配碳量是使反应体系处于气相平衡的关键因素.在配碳量＜25％时,体系内CO、CO2和N2的分压不能达到平衡或维持反应平衡的时间很短,钒钛铁精矿不能被还原或只能部分被还原为Ti(c,N).在还原温度1 500℃,还原时间30 min,配碳量30％的条件下,还原产物中TiC1-xNx的颗粒尺寸约为3μm,TiC1-xNx的C/N值为0.491 5,x=0.67.
参考文献
| [1] | Ying Peng;Hezhuo Miao;Zhijian Peng.Development of TiCN-based cermets: Mechanical properties and wear mechanism[J].International Journal of Refractory Metals & Hard Materials,2013Jul.(Jul.):78-89. |
| [2] | P. ETTMAYER;H. KOLASKA;W. LENGAUER.Ti(C,N) Cermets -Metallurgy and Properties[J].International Journal of Refractory Metals & Hard Materials,19956(6):343-351. |
| [3] | Yunchao Mu;Mingzhi Wang;Dongli Yu.Synthesis of Ti(CN) powders by combustion reaction from Ti powder and a novel carbon-nitrogen precursor[J].International Journal of Refractory Metals & Hard Materials,20112(2):326-328. |
| [4] | 郭亚琴;白晨光;吕学伟;王华;邓青宇;马世伟.温度对碳热还原制备TiC、TiN的影响研究[J].功能材料,2013(23):3507-3512. |
| [5] | Ahn S.Y.;Kang S..Formation of Core/Rim Structures in Ti(C, N)-WC-Ni Cermets via a Dissolution and Precipitation Process[J].Journal of the American Ceramic Society,20006(6):1489-1494. |
| [6] | J. ZACKRISSON;U. ROLANDER.Development of Cermet Microstructures during Sintering[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20011(1):85-94. |
| [7] | Ji Xiong;Zhixing Guo;Mei Yang.Preparation of ultra-fine TiC_(0.7)N_(0.3)-based cermet[J].International Journal of Refractory Metals & Hard Materials,20083(3):212-219. |
| [8] | M.H. El-Sadek;M.B. Morsi;K. El-Barawy.Mechanochemical synthesis of Fe-TiC composite from Egyptian ilmenite ore[J].International Journal of Mineral Processing,2013:39-42. |
| [9] | Hui Yuan Liu;Ji Hua Huang;Chang Feng Yin.Microstructure and properties of TiC-Fe cermet coatings by reactive flame spraying using asphalt as carbonaceous precursor[J].CERAMICS INTERNATIONAL,20075(5):827-835. |
| [10] | A. Calka;D. Oleszak;N. Stanford.Rapid synthesis of TiC-Fe_3C composite by electric discharge assisted mechanical milling of ilmenite (FeTiO_3) with graphite[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20081/2(1/2):498-500. |
| [11] | Heguo Zhu;Kang Dong;Huan Wang.Reaction mechanisms of the TiC/Fe composite fabricated by exothermic dispersion from Fe-Ti-C element system[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2013:456-461. |
| [12] | Mansour Razavi;Amir Hossein Rajabi-Zamani;Mohammad Reza Rahimipour.Synthesis of Fe-TiC-Al_2O_3 hybrid nanocomposite via carbothermal reduction enhanced by mechanical activation[J].CERAMICS INTERNATIONAL,20112(2):443-449. |
| [13] | Mansour Razavi;Maziar S. Yaghmaee;Mohammad Reza Rahimipour.The effect of production method on properties of Fe-TiC composite[J].International Journal of Mineral Processing,20103/4(3/4):97-100. |
| [14] | Mansour Razavi;Mohammad Reza Rahimipour.Effect of mechanical activation on syntheses temperature of TiC reinforced iron-based nano-composite from ilmenite concentrate[J].CERAMICS INTERNATIONAL,20098(8):3529-3532. |
| [15] | C. C. Degnan;P. H. Shipway.A comparison of the reciprocating sliding wear behavior of steel based metal matrix composites processed from self-propagating high-temperature synthesized Fe-TiC and Fe-TiB{sub}2 masteralloys[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20029/10(9/10):832-841. |
| [16] | Hans Berns;Birgit Wewers.Development of an abrasion resistant steel composite with in situ TiC particles[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20012(2):1386-1395. |
| [17] | Degnan CC.;Wood JV.;Shipway PH..Elevated temperature sliding wear behaviour of TiC-reinforced steel matrix composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20012(2):1444-1451. |
| [18] | K. Das;T. K. Bandyopadhyay.Effect of form of carbon on the microstructure of in situ synthesized TiC-reinforced iron-based composite[J].Materials Letters,200412/13(12/13):1877-1880. |
| [19] | P. Alvaredo;S. A. Tsipas;E. Gordo.Influence of carbon content on the sinterability of an FeCr matrix cermet reinforced with TiCN[J].International Journal of Refractory Metals & Hard Materials,2013Jan.(Jan.):283-288. |
| [20] | F. Velasco;R. Isabel;N. Anton.TiCN-high speed steel composites: sinterability and properties[J].Composites, Part A. Applied science and manufacturing,20026(6):819-827. |
| [21] | B. Gomez;E. Gordo;J.M. Torralba.Influence of milling time on the processing of Fe-TiCN composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20061/2(1/2):59-63. |
| [22] | F. Velasco;E. Gordo;R. Isabel.Mechanical and wear behaviour of high-speed steels reinforced with TiCN particles[J].International Journal of Refractory Metals & Hard Materials,20014/6(4/6):319-323. |
| [23] | Juanjian Ru;Yixin Hua;Cunying Xu.Synthesis of TiN from FeTiO_3 by microwave-assisted carbothermic reduction-nitridation[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2014:121-127. |
| [24] | 刘胜明;汤爱涛;赵子鹏.Al2O3-TiC/TiCN颗粒增强铁基复合材料的研究[J].功能材料,2014(1):1010-1014. |
| [25] | 陈敏;汤爱涛;刘胜明;赵子鹏;王健;刘传璞.钛铁矿制备Ti（C,N）粉C/N的控制研究[J].功能材料,2013(15):2271-2275. |
| [26] | 邓伟林;冯可芹;张光明;李莹;张雨.钒钛铁精矿碳热还原制备铁基摩擦材料的热力学分析[J].材料研究学报,2014(1):44-50. |
| [27] | 曹明明;张建良;邢相栋;王春龙;白亚楠;文永才.钒钛磁铁矿含碳球团的还原机制[J].钢铁,2012(8):5-12. |
| [28] | X. He;J.W. Ye;Y. Liu.Phase transition and microstructure evolution during the carbothermal preparation of Ti(C,N) powders in an open system[J].Advanced Powder Technology: The internation Journal of the Society of Powder Technology, Japan,20104(4):448-451. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%