欢迎登录材料期刊网

材料期刊网

高级检索

利用热压烧结技术制备高致密度短碳纤维增韧碳化硅陶瓷基(Csf/SiC)复合材料.研究稀土氧化物添加比对烧结后Csf/SiC复合材料微观结构、力学特性和增韧机制的影响.结果表明:随着烧结助剂中La2O3含量增加,烧结后材料中SiC颗粒平均粒径减小,相对密度逐渐降低,而强度和韧性则先增加后降低;颗粒桥连、纤维拔出和裂纹偏转是该材料体系的主要增韧方式.

参考文献

[1] Faber K T;Evans A G .Intergranular crack-deflection toughening in silicon carbide[J].Journal of the American Ceramic Society,1983,66(06):94-96.
[2] Kim D H;Kim C H .Toughening behavior of silicon carbide with the additions of yttria and alumina[J].Journal of the American Ceramic Society,1990,73(05):1431-1434.
[3] Lee S K;Kim C H .Effect of α-SiC versus β-SiC starting powders on microstructure and fracture toughness of SiC sintered with Al2O3-Y2O3 additives[J].Journal of the American Ceramic Society,1994,77(06):1655-1658.
[4] Padture N P .In situ toughened silicon carbide[J].Journal of the American Ceramic Society,1994,77(02):519-523.
[5] Liden E.;Eklund L.;Nyberg B.;Carlsson R.;Carlstrom E. .HOMOGENEOUS DISTRIBUTION OF SINTERING ADDITIVES IN LIQUID-PHASE SINTERED SILICON CARBIDE[J].Journal of the American Ceramic Society,1995(7):1761-1768.
[6] Xiulan He;Yingkui Guo;Yu Zhou .Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing[J].Materials Characterization,2008(12):1771-1775.
[7] Zhang, YM;Zhang, YL;Han, JC;Hu, LY .The effect of sintering additive on fracture behavior of carbon-whisker-reinforced silicon carbide composites[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1-2):62-67.
[8] F. K. van Dijen;E. Mayer .Liquid Phase Sintering of Silicon Carbide[J].Journal of the European Ceramic Society,1996(4):413-420.
[9] R.M. Balestra;S. Ribeiro;S.P. Taguchi .Wetting behaviour of Y_2O_3/AlN additive on SiC ceramics[J].Journal of the European Ceramic Society,2006(16):3881-3886.
[10] Pan Y;Baptista J L .Low-temperature sintering of silicon carbide with Li2O-Al2O3-SiO2 melts as sintering aids[J].Journal of the European Ceramic Society,1996,16(11):1221-1230.
[11] González J S;Ortiz A L;Guiberteau F et al.Complex impedance spectroscopy study of a liquid phase sinteredα-SiC ceramic[J].Journal of the European Ceramic Society,2007,27(13/15):3935-3939.
[12] Jin-Seok Lee;Sea-Hoon Lee;Toshiyuki Nishimura .A ternary compound additive for vacuum densification of β-silicon carbide at low temperature[J].Journal of the European Ceramic Society,2009(16):3419-3423.
[13] Kirianov A;Yamaguchi A .The effect of post-sintering heat treatment on the properties of SiC-LaAlO3-chromium carbide ceramic material fabricated by a liquid phase sintering:Ⅰ.Phase relations between LaAlO3,SiO2 and SiC in 1300-1600 ℃[J].Ceramics International,2000,26(07):757-762.
[14] Kirianov A;Yamaguchi A .The effect of post-sintering heat treatment on the properties of SiC-LaAlO3-chromium carbide ceramic material fabricated by a liquid phase sintering:Ⅱ.Effect of heat-treatment at 1500 ℃ on properties of SiC-LaAlO3chromium carbide ceramic materials[J].Ceramics International,2000,26(07):763-768.
[15] Lin Li;Zhujun Tang;Weiying Sun .Phase diagram prediction of the Al_2O_3-SiO_2-La_2O_3 system[J].Journal of Materials Science & Technology,1999(5):439-443.
[16] You Zhou;Kiyoshi Hirao;Motohiro Toriyama .Effects of Intergranular Phase Chemistry on the Microstructure and Mechanical Properties of Silicon Carbide Ceramics Densified with Rare-Earth Oxide and Alumina Additions[J].Journal of the American Ceramic Society,2001(7):1642-1644.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%