提出了一种碳纤维增强复合材料点阵夹芯结构的一体化成型工艺方法.该方法克服了传统夹芯结构面板与芯子之间因需要二次粘接或焊接的方法所带来弱界面的缺点.将纤维杆两端埋入面板内,使面板与芯子成为一体而不存在明显的界面.对用该方法制备的碳纤维增强金字塔点阵夹芯板进行平压试验,研究发现随着载荷的增加,纤维杆发生弹性屈曲并在中间部位出现断裂.理论分析了点阵夹芯结构平压载衙下的弹性模量和纤维杆极限屈曲载荷.通过与传统夹芯材料相比较发现,这种新型复合材料点阵夹芯结构具有密度低、比强度和比刚度高等优点.
A new fabrication technology of carbon fiber reinforced pyramidal lattice truss core sandwich structures was presented. It dealt with the disadvantage of such traditional technology as the facesheets and core needing bonded or joined additionally. Both ends of truss members were embedded into the facesheets without evident interface between the core and facesheets. The pyramidal lattice truss core sandwich structures were tested under compressive load. Observation of the buckling and splitting of truss members was done during the tests. And the compressive stiffness and the limit buckling load of the lattice truss core sandwich structures were calculated theoretically. Compared with the traditional sandwich structures, the pyramidal lattice truss core sandwich structures have the advantages of lower density, higher specific stiffness and higher specific strength.
参考文献
| [1] | 马世勇,刘洪军.玻璃钢夹芯材料的应用[J].玻璃钢/复合材科,2001(2):53-55Ma Shiyong,Liu Hongjun.FRP sandwich structure materials application[J].Fiber Reinforced Plastics/Composite,2001 (2):53-55. |
| [2] | Gibson L J,Ashby M F.Cellular solids:Structure and properties[M].刘培生,译.北京:清华大学出版社,2003:5-8. |
| [3] | Evans A G,Hutchinson J W,Ashby M F.Multifunctionality of cellular metal systems[J].Progress in Materials Seinece,1999,43(3):171-221. |
| [4] | Wicks N,Hutchinson J W.Optimal truss plates[J].International Journal of Solid and Structures,2001,38(30/31):5165-5183. |
| [5] | Lu T J,Valdevit L,Evans A G.Active cooling by metallic sandwich structures with periodic cores[J].Progress in Materials Science,2005,50(7):789-815. |
| [6] | Zok F W,Waltner S A,Wei Z,Rathbum H J,McMeeking R M,Evans A G.A protocol for characterizing the structural performance of metallic sandwich panels:Application to pyramidal truss cores[J].International Journal of Solid and Structures,2004,41(22/23):6249-6271. |
| [7] | Deshpande V S,Fleck N A.Collapse of truss core sandwich beams in 3-point bending[J].International Journal of Solid and Structures,2001,38(36/37):6275-6305. |
| [8] | Deshpande V S,Ashby M F,Fleck N A.Form topology bending versus stretching dominated architectures[J].Acta Materialia,2001,49(10):1035-1040. |
| [9] | Evans A G,Hutchinson J W,Fleck N A,et al.The topological design of rnultifunctional cellular metals[J].Progress in Materials Science,2001,50(3/4):309-327. |
| [10] | Deshpande V S,Fleck N A,Ashby M F.Effective properties of the octet-truss lattice material[J].Journal of the Mechanics and Physics of Solids,2001,49(8):1747-1769. |
| [11] | Wadley H N G,Fleck N A,Evans A G.Fabrication and structural performance of periodic cellular metal sandwich structures[J].Composites Science and Technology,2003,63(16):2331-2343. |
| [12] | Chiras S,Mumm D R,Evans A G,et al.The structural performance of near-optimized truss core panels[J].International Journal of Solids and Structures,2002,39(15):4093-4115. |
| [13] | Queheillalt D T,Wadley H N G.Pyramidal lattice truss structures with hollow trusses[J].Materials Science and Engineering A,2005,397(112):132-137. |
| [14] | Biagi R,Bart-Smith H.Imperfection sensitivity of pyramidal core sandwich structures[J].International Journal of Solids and Structures,2007,44(14/15):4690-4706. |
| [15] | Lim Ji-Hyun,Kang Ki-Ju.Mechanical behavior of sandwich panels with tetrahedral and Kagome truss cores fabricated from wires[J].International Journal of Solids and Structures,2005,43(17):5228-5246. |
| [16] | Queheillalt D T,Murty Y,Wadley H N G.Mechanical properties of an extruded pyramidal lattice truss sandwich structure[J].Scripta Materialia,2008,58(1):76-79. |
| [17] | 范华林,杨卫,方岱宁,庄茁,陈祥宝,邢丽英,李斌太,蒋诗才.新型碳纤维点阵复合材料技术研究[J].航空材料学报,2007,27(1):46-50.Fan Hualin,Yang Wei,Fang Daining,Zhuang Zhuo,Chen Xiangbao,Xing Liying,Li Bintai,Jiang Shicai.Interlacing technique for new carbon fiber lattice materials[J].Journal of Aeronautical Materials,2007,27(1):46-50. |
| [18] | Fan Hualin,Yang Wei,Wang Bin,Yan Yong,Fu Qiang,Fang Daining,Zhuang Zhuo.Design and manufacturing of a composite lattice structure reinforced by continuous carbon fibers[,J].Tsinghua Science and Technology,2006,11 (5):515-522. |
| [19] | Finnegan K,Koositra G,Wadley H N G,Dshpande V S.The compressive response of carbon fiber composite pyramidal truss sandwich cores[J].International Journal of Material Research,2007,98(12):1264-1272. |
| [20] | Fan H L,Meng F H,Yang W.Sandwich panels with Kagome lattice cores reinforced by carbon fibers[J].Composite Structures,2007,81(4):533-539. |
| [21] | Zok F W,Rathbun H J,Wei Z,Evans A G.Design of metallic textile core sandwich panels[J].International Journal of Solids and Structures,2003,40(21):5707-5722. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%