采用熔融共混法制备了微晶纤维素/聚丁二酸丁二醇酯(MCC/PBS)复合材料,用高级毛细管流变仪和旋转流变仪分别测定复合材料的稳态流变性能和动态流变性能,研究了不同 MCC 含量、不同温度对复合材料流变行为的影响。结果表明,复合材料的黏度与剪切速率的流变曲线符合幂律流体的特征,可以用幂律模型对其进行拟合；复合材料的黏度与温度的关系可用 Arrhenius 方程对其进行描述。在线性黏弹区,复合材料的储能模量(G')维持恒定,当应变(γ)超过临界值(γc )时,复合材料进入非线性黏弹区,出现了“Payne”效应,并且随着 MCC含量的增加,γc 下降。在角频率(ω)扫描范围内,复合材料的储能模量(G')、损耗模量(G″)和复数黏度|η*|均随着MCC含量的增加而增大。在相同的 MCC含量下,G″的值始终大于G'的值,损耗因子(tanδ)均大于1。在低频区,G'出现第二平台。MCC/PBS复合材料加工流变特性的研究,对指导 MCC/PBS复合材料的成型加工具有一定的价值。
The microcrystalline cellulose(MCC)and poly(butylene succinate)(PBS)composites were prepared by melt blending method.The influence of different temperature and MCC content on the steady-state rheological be-havior and dynamic rheological behavior of the composites was studied by advanced capillary rheometer and rotation-nal rheometer.The results show that:the rheological behavior of the corresponding relationship between the viscos-ity and the shear rate of the composites fits the power law model.Arrhenius equation can be employed to describe the dependence of the viscosity on temperature.The storage modulus (G')of the composites keeps invariant in line-ar viscoelastic region.When strain(γ)is over critical value (γc ),the composites enter into the nonlinear viscoelastic region and the “Payne effect”occur.Theγc decrease rapidly with the increase of strain.The storage modulus (G'), loss modulus (G″)and complex viscosity(|η*|)of the composites all increase with the increasing contents of MCC in the range of angular frequency(ω)scanning.The value of G″is always higher than G'and the value of loss factor (tan(δ))is always greater than one under the condition of the invariable content of MCC.Second plateau is observed for G'at lowω.The study of processing rheological properties of MCC/PBS composites might be valuable for the processing of MCC/PBS composites.
参考文献
| [1] | 钱伯章.新型生物降解塑料的开发和应用[J].橡塑技术与装备,2007(01):36-42. |
| [2] | Sanjay Kumar Bhattacharyya;Bhavani Shanker Parmar;Abhijit Chakraborty.Exploring Microcrystalline Cellulose (MCC) as a Green Multifunctional Additive (MFA) in a Typical SolutiorvGrade Styrene Butadiene Rubber (S-SBR)-Based Tread Compound[J].Industrial & Engineering Chemistry Research,201232(32):10649-10658. |
| [3] | Wen Bai;Kaichang Li.Partial replacement of silica with microcrystalline cellulose in rubber composites[J].Composites, Part A. Applied science and manufacturing,200910(10):1597-1605. |
| [4] | Aparecido Junior de Menezes;Gilberto Siqueira;Antonio A.S. Curvelo;Alain Dufresne.Extrusion and characterization of functionalized cellulose whiskersreinforced polyethylene nanocomposites[J].Polymer: The International Journal for the Science and Technology of Polymers,200919(19):4552-4563. |
| [5] | 李春光;李春丽;彭伟功;郑宾国;李云霞;张锐.甘蔗渣微晶纤维素增强聚乳酸复合膜的性能[J].机械工程材料,2012(08):79-82. |
| [6] | L. PETERSSON;K. OKSMAN.Biopolymer based nanocomposites: Comparing layered silicates and microcrystalline cellulose as nano-reinforcement[J].Composites science and technology,200613(13):2187-2196. |
| [7] | Steven Spoljaric;Antonietta Genovese;Robert A. Shanks.Polypropylene-microcrystalline cellulose composites with enhanced compatibility and properties[J].Composites, Part A. Applied science and manufacturing,20096/7(6/7):791-799. |
| [8] | 刘跃军;刘亦武;魏珊珊.EVOH/纳米SiO2复合材料的加工流变性能及应用[J].高分子材料科学与工程,2011(5):124-128. |
| [9] | 胡洪国;郑强;陶小乐.超细SiO2填充聚甲基乙烯基硅氧烷的动态流变特性[J].高等学校化学学报,2004(5):985-987. |
| [10] | 陈艺兰 .PE/Ca（OH）<,2>复合材料绿色化无卤阻燃及流变行为研究[D].福建师范大学,2008. |
| [11] | Philippe Cassagnau.Payne effect and shear elasticity of silica-filled polymers in concentrated solutions and in molten state[J].Polymer: The International Journal for the Science and Technology of Polymers,20038(8):2455-2462. |
| [12] | Singh T;Kumar A.Self-aggregation of ionic liquids in aqueous media: A thermodynamic study[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,20081/3(1/3):263-268. |
| [13] | 曹咏梅;黄科林;吴睿;王犇;刘宇宏;黄尚顺;何耀良;李卫同.微品纤维素的性质、应用及市场前景[J].企业科技与发展,2009(12):48-51. |
| [14] | Paul Wambua;Jan Ivens;Ignaas Verpoest.Natural fibres: can they replace glass in fibre reinforced plastics?[J].Composites science and technology,20039(9):1259-1264. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%