模拟压水堆一回路加锌水环境，对镍基690合金在加锌浓度为10μg／kg的320℃，15．20MPa溶液中进行了1000h的腐蚀试验。采用XPS深度分析法对试样氧化膜进行分析。结果表明，锌能有效地降低690合金的均匀腐蚀速率，加锌后氧化膜形貌和成分都有了明显改变，氧化膜厚度变薄。
Zinc primary coolant addition of zinc, morphology and addition effects on general corrosion of Nickel- with 10 μg/kg zinc addition at 320 ℃, 15. 20 base Alloy 690 were investigated in simulated PWR MPa for 1000 h. The results show that with the ively reduced. The surface oxide film is thinner, the changed.
参考文献
| [1] | 刘侠和,吴欣强,韩恩厚.轻水堆结构材料在加锌水中的腐蚀行为研究现状与进展[J].腐蚀科学与防护技术,2011(04):287-292. |
| [2] | Machet A.;Galtayries A.;Marcus P.;Combrade P.;Jolivet P.;Scott P. .XPS study of oxides formed on nickel-base alloys in high-temperature and high-pressure water[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,2002(1):197-200. |
| [3] | 乔培鹏,张乐福,刘瑞芹,姜苏青,朱发文.压水堆条件下锌对奥氏体不锈钢腐蚀性能的影响[J].原子能科学技术,2010(06):690-693. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%