对CuCr50合金在5 GPa压力下进行950℃保温20 min的高温高压处理,借助光学显微镜、扫描电镜、透射电镜对经高温高压处理前后CuCr50合金中Cr相进行观察,并用纳米压痕技术对Cr相的微观力学性能进行测试,探讨了高温高压处理对CuCr50合金中Cr相的微观力学性能的影响.结果表明:高温高压处理能使CuCr50合金中Cr相更加致密,增大Cr相的硬度、弹性模量、硬弹比和弹性回复系数,减小摩擦系数.
参考文献
| [1] | Franz Hauner;Gunter Tiefel .CuCr for Vacuum Interrupters - Production, Properties and Application[J].Erzmetall,2007(4):218-225. |
| [2] | Cao Weichan;Liang Shuhua;Zhang Xiao .Effect of Fe on microstructures and vacuum arc characteristics of CuCr alloys[J].International Journal of Refractory Metals & Hard Materials,2011(2):237-243. |
| [3] | ZHAO Zheng;LI Xiao-jie;TAO Gang et al.CuCr bulk alloy produced by mechanical alloying and explosive compaction[J].Transactions of Nonferrous Metals Society of China,2009,19(S):626-629. |
| [4] | Ma Yu-quan;Lin Hong-ju;Zhang Li-hong .Effects of High Pressure Heat Treatment on Thermal Conductivity and Electrical Conductivity of CuAIBi Alloy[J].Materials transactions,2013(8):1480-1483. |
| [5] | CHEN Yan;LI Ya-li;LIU Jian-hua et al.Effect of 2 GPa pressure treatment on the microstructure evolution of Cu-Zn alloy[J].Materials Transactions,2013,54(2):184-187. |
| [6] | 谌岩,刘琳,刘建华,张瑞军.高压处理对Cu75．15A124．85合金组织与电阻率的影响[J].物理学报,2012(17):378-383. |
| [7] | MA Yu-quan .Effects of 4 GPa pressure heat treatment on mechanical properties and electrical conductivity of CuCrNiAl alloy[J].Materials Transactions,2013,54(5):725-728. |
| [8] | 赵军,尹硕,陈久川,王智,文全兴,杨永明.高压处理对Cu-50.84Cr-0.48Al合金热扩散系数和热膨胀性能的影响[J].稀有金属,2013(05):834-839. |
| [9] | 王立彬,张程煜,丁秉钧.W或C添加剂对优化CuCr25合金显微组织的作用[J].稀有金属材料与工程,2003(01):41-44. |
| [10] | 熊毅,郭志强,何红玉,卢艳君,张凌峰.ECAP温变形高碳珠光体钢中亚微米级铁素体的力学性能[J].材料热处理学报,2013(07):36-40. |
| [11] | 张文达,杨晶,党惊知,徐宏,白培康.深冷处理对黄铜组织与力学性能的影响[J].材料热处理学报,2013(01):127-131. |
| [12] | 翟长生,杨力,王俊,赵文明,孙宝德.Al2O3/TiO2纳米复合粉体爆炸喷涂层微结构及纳米压痕力学特性[J].无机材料学报,2005(06):1500-1508. |
| [13] | Elsayed-Ali, HE;Rigsbee, JM;Banas, G;Chu, JP .Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,1999(1-2):260-268. |
| [14] | Leyland A;Matthews A .On the significance of the H/E ratio in wear control:A nanocomposite coating approach to optimised tribological behaviour[J].WEAR,2000,246(1/2):1-11. |
| [15] | Wangyang Ni;Yang-Tse Cheng;Michael J. Lukitsch;Anita M. Weiner;Lenoid C. Lev;David S. Grummon .Effects of the ratio of hardness to Young's modulus on the friction and wear behavior of bilayer coatings[J].Applied physics letters,2004(18):4028-4030. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%