欢迎登录材料期刊网

材料期刊网

高级检索

采用固相法合成了性能良好的PZN-PZT陶瓷粉体.将压电陶瓷粉体分散于PVDF基体中,制备了0-3型PZN-PZT/PVDF压电复合材料.研究了复合材料的复合工艺、极化参数与压电陶瓷的含量对复合材料压电性能的影响.结果表明,溶液混合工艺较好,且当极化电场强度为6kV·mm-1、温度为110℃进行极化20min时,陶瓷粉体质量分数为90%的复合材料的压电性能最好,压电常数d33值达35.9 pC·N-1.

参考文献

[1] 王树彬;韩杰才;杜善义 .压电陶瓷/聚合物复合材料的制备工艺及其性能研究进展[J].功能材料,1999,30(02):113-121.
[2] Dias C.J.;Das-Gupta D.K. .Inorganic ceramic/polymer ferroelectric composite electrets[J].IEEE transactions on dielectrics and electrical insulation: A publication of the IEEE Dielectrics and Electrical Insulation Society,1996(5):706-734.
[3] 何政,陈文,孙华君,徐庆,周静,谢永贤.压挤成形--固化法制备0-3型压电复合材料的性能研究[J].陶瓷学报,2003(01):12-15.
[4] 胡南,刘雪宁,陈飞,杨治中.0-3型陶瓷/聚合物压电复合材料的压电性能研究[J].复合材料学报,2005(05):78-82.
[5] 张联盟,游达.0-3 PZT/PVDF压电复合材料的制备及其性能[J].复合材料学报,2004(03):142-145.
[6] 王丽坤;张福学;钟玲 .PbTiO3-F24压电复合材料的研究[J].压电与声光,1996,18(06):415-417.
[7] 刘晓芳,熊传溪,李月明,孙华君,董丽杰,杨小旭.PZT/PVDF体系压电复合材料的介电和压电性能研究[J].陶瓷学报,2004(03):153-156.
[8] Bernd Ploss;Wai-Yin Ng;Helen Lai-Wa Chan .Poling study of PZT/P(VDF-TrFE) composites[J].Composites science and technology,2001(7):957-962.
[9] Joung-Man Park;Jin-Woo Kong;Dae-Sik Kim .Nondestructive damage detection and interfacial evaluation of single-fibers/epoxy composites using PZT, PVDF and P(VDF-TrFE) copolymer sensors[J].Composites science and technology,2005(2):241-256.
[10] 徐永利,李尚平,汪鹏,田莳.热压法制备0.3PZN-0.7PZT压电陶瓷研究[J].无机材料学报,2000(04):673-677.
[11] 李小兵,田莳,李宏波.PZN-PZT压电陶瓷及其PVDF压电复合材料的制备和性能[J].复合材料学报,2002(03):70-74.
[12] Yokosuka M. .Dielectric, piezoelectric and structural studies on the intermediate composition region of Pb(Zn1/3Nb2/3)O-3-PbZrO3 ceramics[J].Japanese journal of applied physics,2001(7):4586-4589.
[13] Fan H Q;Park G T;Choi J J et al.Preparation and improvement in the electrical properties of lead-zinc-niobate-based ceramics by thermal treatment[J].Journal of Materials Research,2002,17(01):180-185.
[14] 冯玉军;井晓天;楼秉哲.PVDF及其共聚物的压电性和制备[J].传感器技术,1996(04):14-31.
[15] 李坤,曹大呼,李金华,陈王丽华.锌铌酸铅-锆钛酸铅(PZN-PZT)压电陶瓷和陶瓷纤维的制备[J].无机材料学报,2005(05):1099-1105.
[16] 刘黎;林华杰 .焦绿石相对PMSN四元系压电陶瓷性能的影响[J].江苏陶瓷,1998,31(04):4-6.
[17] M.Kodama;H.Egami;S.Yoshida .Fabrication of temperature stabilized piezoelectric ceramic for surface acoustic wave devices[J].Applied Physics,1975,14(03):1847-1848.
[18] A.I.Kinggon;J.B.Clark .Sintering of PZT ceramics:atmosphere control[J].American Ceramic Society,1983,66(04):253-256.
[19] Wilson S A;Maistros G W;Whatmore R W .Structure modification of 0-3 piezoelectric ceramic/ polymer through dielectrophoresis[J].Journal of physics E:Applied Physics,2005,38(02):175-180.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%