随着对锆合金核材料使用性能要求的提高,对其耐腐蚀性能也提出了更高的要求.总结了常用包壳锆合金材料的耐腐蚀性能及其耐腐蚀性能的影响规律与作用机制,纳米材料的结构特征、腐蚀性能,以及影响其腐蚀性能的可能因素和影响机制,对锆合金纳米化后的耐腐蚀性影响因素进行了探讨.
参考文献
| [1] | 杨文斗.反应堆材料学[M].北京:原子能出版社,2000 |
| [2] | 赵文金,苗志,蒋宏曼,于晓卫,李卫军,李聪,周邦新.Zr-Sn-Nb合金的腐蚀行为研究[J].中国腐蚀与防护学报,2002(02):124-128. |
| [3] | Daniel Charquet.Zirconium in the Nuclear Industry[A].American Society for Testing and Materials,West Conshohocken,PA,2000:3. |
| [4] | IAEA-TECDOC-996.IAEA-TECDOC-996.Waterside corrosion of zirconium alloys in nuclear power plants[S].IAEA,Vienna,1998. |
| [5] | 周邦新 .锆合金中的疖状腐蚀问题[J].核科学与工程,1993,13:51. |
| [6] | 刘文庆,李强,周邦新,姚美意.显微组织对ZIRLO锆合金耐腐蚀性的影响[J].核动力工程,2003(01):33-36. |
| [7] | Liu Wenqing;Li Qiang;Zhou Bangxin et al.Effect of heat treatment on the microstructure and corrosion resistance of a Zr-Sn-Nb-Fe-Cr alloy[J].Journal of Nuclear Materials,2005,341:97. |
| [8] | Peter Rudling;Gunnar Wikmark .A unified model of Zircaloy BWR corrosion and hydriding mechanisms[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,1999(1/2):44-59. |
| [9] | Jeong-Yong Park;Hyun-Gil Kim;Yong Hwan Jeong et al.Crystal structure and grain size of Zr oxide characterized by synchrotron radiation microdiffraction[J].Journal of Nuclear Materials,2004,335:433. |
| [10] | Dominique Pecheur .Oxidation of β-Nb and Zr(Fe,V)2 precipitates in oxide films formed on advanced Zr-based alloys[J].Journal of Nuclear Materials,2000,278:195. |
| [11] | Garzarolli F et al.IAEA international symposium on the improvement in water reactor fuel-technology and utilization[R].IAEA-SM-288/24,Stockholm,Sweden,1986. |
| [12] | Jong Hyuk Baek;Yong Hwan Jeong .Depletion of Fe and Cr within precipitates during zircaloy-4 oxidation[J].Journal of Nuclear Materials,2002,304:107. |
| [13] | 陈鹤鸣;马春来;白新德.核反应堆材料腐蚀及其防护[M].北京:原子能出版社,1984 |
| [14] | B·R·T 弗罗斯特;赵文金.材料科学与技术丛书(10B卷)核材料[A].北京:科学出版社,1999 |
| [15] | Godlewski J.[A].Philadelphia,PA:Am Soc Test Mat,Kobe,Japan,1990:416. |
| [16] | 黄强 .锆合金耐腐蚀性能研究综述[J].核动力工程,1996,17:262. |
| [17] | 刘文庆,周邦新.Zr-4合金在 LiOH水溶液中腐蚀机理的概述[J].核动力工程,2001(01):65-69. |
| [18] | Cox B et al.Transient effect of lithium hydroxide and boric acid on zircaloy corrsion[J].Journal of Nuclear Materials,1993,199:272. |
| [19] | Cox B et al.Dissolution of zirconium oxide films in 300℃ LiOH[J].Journal of Nuclear Materials,1995,224:169. |
| [20] | Ramasubramanian N.[A].Philadelphia,PA,1994:378. |
| [21] | Pecheur D.Zirconium in the Nuclear Industry[A].,1998:793. |
| [22] | Godlewski J.Zirconium in the Nuclear Industry.Raman Spectroscopy Study of the Tetragonal-to-Monoclinic Transition in Oxide Scales and Determination of 18O[A].America Society for Testing and Materials,Philadelphia,PA,1991:416. |
| [23] | 周邦新,李强,姚美意,刘文庆,褚玉良.锆-4合金在高压釜中腐蚀时氧化膜显微组织的演化[J].核动力工程,2005(04):364-371. |
| [24] | 杨剑;滕凤恩 .纳米材料综述[J].材料导报,1997,11(02):6. |
| [25] | 胡兰青,李茂林,王科,刘刚,卫英慧,许并社.铝合金表面纳米化处理及显微结构特征[J].中国有色金属学报,2004(12):2016-2020. |
| [26] | 吴秋允 等.电镀纳米镍缺陷的正电子研究[J].核技术,1998,21:213. |
| [27] | 张洪旺,刘刚,黑祖昆,吕坚,卢柯.表面机械研磨诱导AISI 304不锈钢表层纳米化Ⅰ.组织与性能[J].金属学报,2003(04):342-346. |
| [28] | 吕爱强,刘春明,刘刚.表面机械研磨316L不锈钢诱导表层纳米化[J].东北大学学报(自然科学版),2004(09):848-850. |
| [29] | Ei-Moneim A A;Gebert A;Schneider F et al.Grain growth effects on the corrosion behavior of nanocrystalline NdFeB magnets[J].Corrosion Science,2002,44:1097. |
| [30] | Souza C A C;De Oliveira M F;May J E et al.Influence of corrosion and partial crystallization on corrosion resistance of amorphous Fe-M-B-Cu(M= Zr,Nb,Mo) alloys[J].Journal of Non-Crystalline Solids,2000,273:282. |
| [31] | Daniela Zander;Uwe Koster .Corrosion of amorphous and nanocrystalline Zr-based alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,375-377:53. |
| [32] | 李雪莉,李瑛,王福会,雍兴平.USSP表面纳米化Fe-20Cr合金的腐蚀性能及机制研究[J].中国腐蚀与防护学报,2002(06):326-329,334. |
| [33] | Wang X Y;Li D J .Mechanical and electrochemical behavior of nanocrystalline and surface of 304 stainless steel[J].Electrochimica Acta,2002,47:3939. |
| [34] | 吕爱强,张洋,李瑛,刘刚,刘春明.表面纳米化对316L不锈钢性能的影响[J].材料研究学报,2005(02):118-124. |
| [35] | 吕爱强,张洋,刘春明,刘刚.表面纳米化316L不锈钢在酸性介质中腐蚀性能的研究[J].材料与冶金学报,2004(02):129-132. |
| [36] | 吕爱强,张洋,李瑛,刘刚,刘春明.异步轧制对表面纳米化316L不锈钢组织和性能的影响[J].金属学报,2005(03):271-276. |
| [37] | Xu Jian;Bai Xinde;He Fei et al.Influence of Ar Ion bombardrnent on the uniform corrosion resistance of laser-surface-melted zircaloy-4[J].Journal of Nuclear Materials,1999,265:240. |
| [38] | Peng X;Yan J;Zhou Y et al.Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air[J].ACTA MATERIALIA,2005,53:5079. |
| [39] | Mondal K;Murty B S;Chatterjee U K .Electrochemical behavior of multicom-onent amorphous and nanocrystalline Zr-based alloys in different environments[J].Corrosion Science,2005,47(11):2619. |
| [40] | Gu Changdong;Lian Jianshe;He Jinguo et al.High corrosion-resistance nanocrystalline Ni coating on AZ91D magnesium alloy[J].Surface and Coatings Technology,2006,200:5413. |
| [41] | Wang Tiansheng;Yu Jinku;Dong Bingfeng .Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel[J].Surface and Coatings Technology,2006,200(04):4777. |
| [42] | Mato S;Alcal'a G;Woodcock T G et al.Corrosion behavior of a Ti-base nanostructure-dendrite composite[J].Electrochimica Acta,2005,50:2461. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%