Ti6Al4V钛合金在激光焊接过程中,由于热源密度高,在焊缝及其附近的狭窄区域形成了极大的温度梯度,并导致焊接接头形成大梯度的组织性能和残余应力.基于国内外的文献,综合研究了钛合金激光焊温度、接头组织、显微性能与残余应力的非均匀梯度特征.研究表明,对于焊接接头大梯度特征的研究,主要集中在分析组织、性能和残余应力的不均匀性方面,而未对梯度特征做出定量分析与评价.因此,如何对焊后组织性能和残余应力的梯度特征进行有效直观的量化表征,对于激光焊接接头的整体性能及安全评价有着重要的意义.
参考文献
| [1] | Turner MW;Crouse PL;Li L .Comparison of mechanisms and effects of Nd : YAG and CO2 laser cleaning of titanium alloys[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2006(13):4792-4797. |
| [2] | Matthew J Donachie.Titanium:A Technical Guide[M].American:ASM International Press,2000 |
| [3] | Casalino G et al.[J].Journal of Materials Processing Technology,2005,167:422. |
| [4] | 张小明.钛及钛合金的焊接[J].稀有金属快报,2001(05):17-20. |
| [5] | Irisarri A M et al.[J].Vacuum,2010,84:393. |
| [6] | Mendez P F;Eagar T W.[A].Bilboa,Spain:NWAI,2002 |
| [7] | 张建勋 .[J].电焊机,2004,39(01):24. |
| [8] | Zhang J X et al.[J].Sci Tech Weld Joining,2005,10(06):643. |
| [9] | 刘川,张建勋,牛靖.数值模拟和实验研究Ti6Al4V合金激光熔透焊接残余应力[J].稀有金属材料与工程,2009(08):1317-1320. |
| [10] | 顾兰,薛忠明,张彦华.激光深熔温度场数值模拟热源模型分析[J].电焊机,2004(09):4-7. |
| [11] | Kazemi, K;Goldak, JA .Numerical simulation of laser full penetration welding[J].Computational Materials Science,2009(3):841-849. |
| [12] | 张喜燕.钛合金及应用[M].北京:化学工业出版社,2005 |
| [13] | Leyens C;Peters M.Titanium and Titanium Alloys[M].Germany:WILEY-VCH Verlag GmbH& Co.KGaA,2003 |
| [14] | Ahmed T;Rack H J .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1998,243:206. |
| [15] | Qi Y L et al.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2000,280:177. |
| [16] | Prasad R K et al.[J].Journal of Materials Processing Technology,2008,199:185. |
| [17] | 钟飞,史耀武,李晓延,巩水利,陈俐.BT20钛合金激光焊接接头的断裂韧性研究[J].材料工程,2005(04):33-37. |
| [18] | Tsay L W;Tsay C Y .[J].IntJFatigue,1997,9(10):713. |
| [19] | Kabir A S H et al.[J].Materials Science and Technology,2010,261:2787. |
| [20] | Wang S H et al.[J].Materials Letters,2003,57:1815. |
| [21] | 程东海,黄继华,林海凡,赵兴科,张华.钛合金激光焊缝的超塑性变形行为及显微组织[J].中国有色金属学报,2010(01):67-71. |
| [22] | 杨静,程东海,黄继华,张华,赵兴科,郭和平.TC4钛合金激光焊接接头组织与性能[J].稀有金属材料与工程,2009(02):259-262. |
| [23] | Mishra S;DebRoy T .[J].Acta Materialia,2004,52:1183. |
| [24] | 李清华,胡树兵,李行志,肖建中,王亚军,刘昕,籍龙波.TC4钛合金焊接接头组织不均匀性与疲劳性能[J].材料工程,2010(01):62-68. |
| [25] | 张建勋,宋旭,董丽娜.钛合金激光焊接接头塑性损伤行为分析[J].焊接学报,2011(05):1-4. |
| [26] | Cao X;Jahazi M .[J].Optics and Laser in Engineering,2009,47:1231. |
| [27] | 朱秀军,熊建钢,黄安国,李志远,胡强.钛合金TC4的激光焊接[J].电焊机,2004(09):13-16. |
| [28] | 徐洁洁 .[D].Beijing:University of Technology Beijing,2009. |
| [29] | Caiazzo F et al.[J].Journal of Materials Processing Technology,2004,149:546. |
| [30] | Jinkeun Oh;Nack J. Kim;Sunghak Lee .Correlation of fatigue properties and microstructure in investment cast Ti-6Al-4V welds[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):232-242. |
| [31] | Sundaresan S et al.[J].Science and Technology of Welding and Joining,1999,4(03):51. |
| [32] | 张建勋 .[J].电焊机,2008,39(01):24. |
| [33] | 张建勋 et al.[J].焊接学报,2000,30(06):107. |
| [34] | Montalvo U J et al.[J].Computational Materials Science,2009,46:245. |
| [35] | 游敏,郑小玲,王福德,晏红.CO2激光焊残余应力测试与分析[J].焊接技术,2002(03):17-18. |
| [36] | Liu C et al.[J].MetallMater TransB,2010,41(05):1129. |
| [37] | Cho J R.First International Symposium on High-Power Laser Macroprocessing[A].Japan,2003 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%