欢迎登录材料期刊网

材料期刊网

高级检索

高温杭氧化性差是限制钛合金作为高温结构材料在航空航天领域广泛应用的关健问题.从涂层体系出发,综述了国内外钛合金高温抗氧化涂层的研究进展.根据涂层的制备方法和性能,对比了各涂层的优缺点,分析了涂层研究中面临的问题,并提出了解决方法,展望了钛合金高温抗氧化涂层的发展方向.

参考文献

[1] Leyens C;Peters M.Titanium and titanium alloys:Fundamentals and applications[M].Wiley-VC.H,2003:292.
[2] 李晓欣.民用大飞机发动机对先进材料的需求[A].广东深圳,2007
[3] 李重河,朱明,王宁,鲁雄刚,程申涛.钛合金在飞机上的应用[J].稀有金属,2009(01):84-91.
[4] 中国材料研究学会.中国新材料产业发展报告--航空航天材料专辑[M].北京:化学工业出版社,2006
[5] Zhou W;Zhao Y G et al.A new way to produce Al+Cr coating on Ti alloy by vacuum fusing method and its oxidation resistance[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,430:254.
[6] Zhou W;Zhao Y C et al.AI-Si coating fused by Al+Si powders formed on Ti-6A1-4V alloy and its oxidation resistance[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,430:142.
[7] Matieu Delmas et al.AI-Pt MOCVD coatings for the protection of Ti6242 alloy against oxidation at elevated temperature[J].Surface and Coatings Technology,2005,200:1413.
[8] 段良辉 .Ti6Al4V双层辉光渗铝工艺与性能的研究[D].太原理工大学,2006.
[9] Md Zafir AIam;Dipak K Das .Effect of cracking in diffusion alumnide coatings on their cyclic oxidation performance on Ti-based IMI-834 alloy[J].Corrosion Science,2009,51:1405.
[10] Streiff R et al.Surface morphology of diffusion aluminide coatings[J].THIN SOLID FILMS,1984,119(03):291.
[11] Zhao Y G;Zhou W et al.Effect of pre-oxidation on the properties of aluminide coating layers formed on Ti alloys[J].Journal of Alloys and Compounds,2005,391:136.
[12] Xia Changqing;Peng Xiaomin;Li Jia.Behavior of NiCrAlY coating on the TC4 titanium alloy[J].Journal of University of Science and Technology Beijing Mineral Metallurgy Material,2008(15):167.
[13] Dosbaeva G K;Veldhuis S C et al.Ion-plated AI-AIZ0,films as diffusion barriers between NiCrA1Y coating and orthorhombirTi2AINb alloy[J].Corrosion Science,2010,52(05):1668.
[14] Wang QM;Zhang K;Gong J;Cui YY;Sun C;Wen LS .NiCoCrAlY coatings with and without an Al2O3/Al interlayer on an orthorhombic Ti2AlNb-based alloy: Oxidation and interdiffusion behaviors[J].Acta materialia,2007(4):1427-1439.
[15] 吴小梅,李伟光,陆峰.钛合金叶片防护涂层研究--十五科研项目工作总结[J].装备环境工程,2006(03):116-118,129.
[16] Zhou H;Li F;Wang BHJ;Sun BD .Air plasma sprayed thermal barrier coatings on titanium alloy substrates[J].Surface & Coatings Technology,2007(16/17):7360-7367.
[17] 周海,陈飞,张建军,万汉城,吕晓静.TC4表面超音速等离子喷涂热障涂层的研究[J].稀有金属材料与工程,2008(z1):771-773.
[18] Dudziak T;Du H L et al.Sulphidation/oxidation behaviour of TiAlCr and A1_2 Cu coated Ti45Al8Nb alloy at 7500C[J].Corrosion Science,2009,51:1189.
[19] Frohlich M;Braun R;Leyens C .Oxidation resistant coatings in combination with thermal barrier coatings on gamma-TiAl alloys for high temperature applications[J].Surface & Coatings Technology,2006(7):3911-3917.
[20] Grobstein T;Doychak H.Oxidation of high temperature intermetallics[M].USA:The Minerals,Matals & Materials Society,1988:185.
[21] Perkins R A;Chiang K T;Meier G H .Formation of alumina on Ti-AI alloys[J].Scripta Metallurgica,1987,21(11):1505.
[22] Schaeffer J C;Meier G H;McCarron R I .GE aircraft engines interim report No.4[Contract N62269-90-C-0287][R].Naval Air Development Center,1993.
[23] Brady M P;Smialek J L;Terepka F .Microstructure of alumina-forming oxidation resistant Al-Ti-Cr alloys[J].Scripta Metallurgica et Materialia,1995,32:1659.
[24] 闫伟,王清江,刘建荣,孙凤久,王启民.Ti-60钛合金电弧离子镀Ti-Al-(Cr)防护涂层的循环氧化行为[J].材料研究学报,2009(03):231-236.
[25] Klansky J L;Nic J P;Mikkola D E .Structure/property observations for Al-Ti-Cr alloys near the cubic(Al,Cr)_3Ti phase[J].Materials Science and Engineering,1992,152(1-2):132.
[26] Fox Rabinovich G S;Wilkinson D S et al.Oxidation resistant Ti-AI-Cr alloy for protective coating applications[J].Intermetallics,2006,14:189.
[27] 闫伟,孙凤久,王清江,刘建荣,陈志勇,李少强.Ti60合金表面电弧离子镀Ti-Al-Cr(Si,Y)防护涂层的热腐蚀行为[J].金属学报,2009(10):1171-1178.
[28] Dosbaeva G K;Veldhuis S C et al.Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature[J].International Journal of Refractory Metals and Hard Materials,2010,28:133.
[29] Jin Qian;Xue Wenbin et al.Al_2O_3 coating fabricated on titanium by cathodic microarc electrodeposition[J].Journal of Alloys and Compounds,2009,476:356.
[30] 任保轶,张学军,冯乃祥,高枫.溶胶-凝胶法制备的Al2O3涂层及其对γ-TiAl合金的高温氧化防护[J].中国有色金属学报,2009(08):1488-1492.
[31] 唐兆麟;王福会 等.涂层对Ti60合金高温氧化性能及力学性能的影响[J].金属学报,1998,34(03):325.
[32] Xiong Yuming;Zhu Shenglong;Wang Fuhui .The oxidation behavior and mechanical performance of Ti60 alloy with enamel coating[J].Surface and Coatings Technology,2005,190:195.
[33] Xiong Yuming;Zhu Shenglong;Wang Fuhui .The oxidation behavior of TiAINb intermetallics with coatings at 8000C[J].Surface and Coatings Technology,2005,197:322.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%