探讨了采用应变诱导轧制及应变诱导轧制与常规控轧技术相结合获得超细晶铁素体组织的可行性,研究了冷却速度对应变诱导铁素体晶粒长大的影响.实验结果表明,采用应变诱导轧制可显著细化铁素体组织;将应变诱导轧制技术与常规控轧工艺相结合所获得的超细晶组织更为理想.通过实验室模拟轧制,已获得体积分数为97 %、晶粒尺寸达0.92 μm的超细铁素体组织.TEM分析发现,超细晶铁素体内位错密度较低并有少量小角度晶界存在.
参考文献
[1] | Priestner R;Al-Badri A M A.Ferrite Grain Coarsening during the Transformation of Deformed Austenite[A].北京:中国科学技术出版社,1995:231-236. |
[2] | Deardo A J.New Concepts in the Design and Processing ofHigh Performance Steels[A].北京:中国科学技术出版社,1995:99-112. |
[3] | Akihiko KOJIMA;Yoshiyuki WATANABE;Yoshio TERADA;Atsuhiko YOSHIE;Hiroshi TAMEHIRO .Ferrite Grain Refinement by Large Reduction per Pass in Nonrecrystallization Temperature Region of Austenite[J].ISIJ International,1996(5):603-610. |
[4] | Matsumura Y;Yada H .Evolution of Ultrafine-Grained Ferritein Hot Successive Deformation[J].Transactions of the Iron and Steel Institute of Japan,1987,27:492-498. |
[5] | Lee S .Transformation Strengthing by ThermomechanicalTreatments in C-Mn-Ni-Nb Steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1995,26:1093-1100. |
[6] | P.D.Hodgson;M.R.Hickson .The production and mechanical properties of ultrafine ferrite[J].Materials Science Forum,1998(0):63-72. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%