欢迎登录材料期刊网

材料期刊网

高级检索

研究了热处理条件对不同方法制备的Ag-30Pd粉末的相结构与形貌的影响。结果表明,采用水合肼还原制备的Ag-30Pd共沉淀粉末,在335℃下经过油酸或氮气介质中液相或固相热处理后,粉末均朝合金化结构转变;采用抗坏血酸还原制备出的银钯合金粉初始为团聚颗粒,经400~450℃氮气气氛下热处理后,颗粒发生烧结而变得密实,结晶性提高;总体上,银钯共沉淀粉在335℃,合金粉在450℃的氮气保护下保温处理4 h后,粉末致密,粒径为1~3μm,可更好地满足银钯浆料的使用要求。

The effect of heat treatment condition on phase structures and morphologies of the Ag-30Pd powders prepared by different methods were investigated. The results show that Ag-30Pd coprecipitated powders produced by the hydrazine hydrate as reducing agent can transform to Ag-30Pd alloy by 335℃heat treatment under the condition of either oleic acid or nitrogen. The Ag-Pd alloy powders reduced by the oleic acid are composed of some agglomerated particles, and the density and crystallinity of the particles increases after heat treatment at 400~450℃. Overall, the Ag-30Pd powders with 1~3 μm particle sizes and high density after heat treatment under 335℃/4 h for coprecipitation powders, and 450℃/4 h for alloy powders can better meet the use requirements of electronic paste.

参考文献

[1] Jong-Il Park;Min Gyu Kim;Young-wook Jun;Jea Sung Lee;Woo-ram Lee;Jinwoo Cheon.Characterization of Superparamagnetic"Core-Shell"Nanoparticles and Monitoring Their Anisotropic Phase Transition to Ferromagnetic"Solid Solution"Nanoalloys[J].Journal of the American Chemical Society,200429(29):9072-9078.
[2] 武斌;杜新雅;朱志高;游月华;孟秋菊;田保;高久瑜.牙科用银钯合金时效处理后的晶相结构变化与显微硬度的关系研究[J].四川医学,2013(5):577-579.
[3] 陈立桥;李世鸿;金勿毁;熊庆丰;刘继松;黄富春;罗慧;王珂.表面活性剂对Ag-10Pd复合粉形貌的影响[J].贵金属,2013(4):17-21.
[4] 熊庆丰;林智杰;姬爱青;刘绍宏;霍地;孙旭东.亚微米级球形银钯合金粉末的制备[J].材料与冶金学报,2013(2):124-127,131.
[5] 金勿麎;陈立桥;李世鸿;吕刚;李俊鹏;罗麐.金铂钯合金粉末的特性对低温共烧电子浆料性能的影响[J].贵金属,2015(1):1-5.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%