欢迎登录材料期刊网

材料期刊网

高级检索

采用种子乳液聚合制备了丙烯酸酯核/壳结构聚合物,总转化率超过95%,乳胶粒理论粒径与实测值基本一致,说明聚合体系没有明显的二次成核过程.将其用于硬质聚氯乙烯改性,当加入量为3 phr时,就能产生显著的增韧效果,常温缺口冲击强度达到16.51 kJ/cm2,而拉伸强度基本保持不变.扫描电镜分析冲击断口表明,核/壳聚合物已经很好分散到聚氯乙烯基体中,呈网状结构,为明显的韧性断裂过程.该研究有望应用于工业生产.

参考文献

[1] 张留成;闫卫东;王家喜.高分子材料进展[M].北京:化学工业出版社,2005
[2] Aguiar A.;Rabelero M.;Mendizabal E.;Puig J.E.;Dominguez J.M.;Katime I.;Gonzalez-Villegas S. .Core-shell polymers with improved mechanical properties prepared by microemulsion polymerization[J].Macromolecules,1999(20):6767-6771.
[3] 潘明旺,张留成,袁金凤,王小梅.ACR-g-PVC复合粒子结构与对PVC的增韧效率[J].高分子学报,2005(01):47-52.
[4] Macho V.;Kralik M.;Micka M.;Komora L.;Srokova I. .A tough noncombustible material prepared by grafting of poly(2-ethylhexyl acrylate) with vinyl chloride[J].Journal of Applied Polymer Science,2002(11):2355-2362.
[5] VINEY R D .[D].University of Manchester Institute of Science and Technology,1995.
[6] Crawford E.;Lesser AJ. .Mechanics of rubber particle cavitation in toughened polyvinylchloride (PVC)[J].Polymer: The International Journal for the Science and Technology of Polymers,2000(15):5865-5870.
[7] DOPAS D .[J].Polymer,1994,35:4750-4759.
[8] Chakrabarti R;Chakraborty D .Studies on engineering properties of PVC-PMMA semi-interpenetrating polymer networks[J].Journal of Applied Polymer Science,2005(4):1725-1735.
[9] LOVELL P A;SHAH T H .[J].Polymers Communication,1991,32:98.
[10] PLESSIS C;ARZAMENDI G;ASUA J M et al.[J].Journal of POLYMER SCIENCE PART A:POLYMER CHEMISTRY,2001,39:1106-1119.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%