欢迎登录材料期刊网

材料期刊网

高级检索

为改善接触线的耐磨性能,在Cu-Ag合金中添加微量Fe元素制备了Cu-Ag-Fe合金接触线,研究了电流强度、滑动速度和载荷对Cu-Ag-Fe合金的磨损形貌及磨损率的影响.实验结果表明:随电流强度、滑动速度和载荷的增加,合金的质量磨损率明显增加.磨损形貌表明,在受电滑动条件下,磨损形式以粘着磨损、磨粒磨损和电侵蚀磨损为主,且随着电流强度的增加,粘着磨损现象加剧.由于Fe元素的时效析出强化作用,Cu-Ag-Fe合金的电磨损性能比Cu-Ag合金高出2倍多,大大提高了该合金的使用寿命.

To improve the wear performance of contact wire of Cu-Ag alloys,trace iron was added,and the influence of electrical current,sliding speed and load on the wear morphology and wear rate of Cu-Ag-Fe alloys were studied.The results show that the wear rates of Cu-Ag-Fe alloys increase with the increasing of electrical current,sliding speed and load.The wear morphologies indicate that the adhesive wear,abrasive wear and electrical erosion are the dominant mechanisms during the electrical sliding processes.And with the electrical current increased,the phenomena of the adhesive wear have intensified.The electrical sliding wear resistance of Cu-Ag-Fe alloys is 2 times of that of Cu-Ag alloys because of the aging strengthening action of iron,which increases the service life of Cu-Ag alloys.

参考文献

[1] 刘平,贾淑果,赵冬梅,任凤章,田保红,康布熙.高速电气化铁路用铜合金接触线的研究进展[J].材料导报,2004(06):32-34,38.
[2] 刘勇,刘平,李伟,田保红.Cu-Cr-Zr-Ce合金时效行为和电滑动磨损性能研究[J].摩擦学学报,2005(03):265-269.
[3] A. Bouchoucha;S. Chekroud;D. Paulmier .Influence of the electrical sliding speed on friction and wear processes in an electrical contact copper-stainless steel[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(4):330-342.
[4] Kestursatya M.;Kim JK.;Rohatgi PK. .Wear performance of copper-graphite composite and a leaded copper alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):150-158.
[5] 刘平,贾淑果,郑茂盛,任凤章.微量Zr对Cu-Ag合金磨损行为的影响[J].材料研究学报,2006(01):109-112.
[6] 齐卫笑,涂江平,杨友志,耐艳,张家涛,王甘国友,刘芙,张孝彬,刘茂森.时效处理对低溶质Cu-Cr-Zr合金力学和电滑动磨损性能的影响[J].摩擦学学报,2001(06):405-409.
[7] 雷静果 .新型高强高导Cu-Ag-Cr合金的组织性能及时效动力学研究[D].西安理工大学,2007.
[8] H. Nagasawa;K. Kato .Wear mechanism of copper alloy wire sliding against iron-base strip under electric current[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1998(2):179-183.
[9] D. H. He;R. R. Manory;N. Gardy .Wear of railway contact wires against current collector materials[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1998(1/2):146-155.
[10] Da Hai He;Rafael Manory;Harry Sinkis .A sliding wear tester for overhead wires and current collectors in light rail systems[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1):10-20.
[11] 刘勇,刘平,李伟,田保红.Cu-Cr-Zr-Ce合金时效行为和电滑动磨损性能研究[J].摩擦学学报,2005(03):265-269.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%