通过观察经剥落腐蚀试验的Al-Zn-Mg-Cu系铝合金试样显微组织,研究了不同成分、热处理及轧制工艺对Al-Zn-Mg-Cu系铝合金的抗剥落腐蚀(EC)性能的影响.结果表明,添加稀土元素Ce的试样抗剥蚀性能低于未添加的合金试样；经过回归再时效处理(RRA)的合金试样抗剥蚀性能优于峰值时效(T6)的合金试样；随着成品冷轧总压下率的增加,合金抗剥蚀性能呈先下降再略上升的趋势,其中10％的成品冷轧总压下率的合金试样抗剥蚀性能最优.
参考文献
| [1] | A. Heinz;A. Haszler;C. Keidel;S. Moldenhauer;R. Benedictus;W. S. Miller .Recent development in aluminium alloys for aerospace applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):102-107. |
| [2] | James C. Williams;Edgar A. Starke Jr. .Progress in structural materials for aerospace systems[J].Acta materialia,2003(19):5775-5799. |
| [3] | J.P. Chubb;T.A. Morad;B.S. Hockenhull;J.W. Bristow .The effect of exfoliation corrosion on the fracture and fatigue behaviour of 7178-T6 aluminium[J].International Journal of Fatigue,1995(1):49-54. |
| [4] | Alexopoulos, ND;Papanikos, P .Experimental and theoretical studies of corrosion-induced mechanical properties degradation of aircraft 2024 aluminum alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):248-257. |
| [5] | Lianghua Lin;Zhiyi Liu;Yao Li;Xiangnan Han;Xu Chen .Effects of Severe Cold Rolling on Exfoliation Corrosion Behavior of Al-Zn-Mg-Cu-Cr Alloy[J].Journal of Materials Engineering and Performance,2012(6):1070-1075. |
| [6] | 苏景新,张昭,曹发和,张鉴清,曹楚南.铝合金的晶间腐蚀与剥蚀[J].中国腐蚀与防护学报,2005(03):187-192. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%