采用两通道夹角Φ=90°,外圆角Ψ=20°的模具,在室温,以C方式(两次挤压道次之间试样绕纵轴旋转180°)对工业纯钛进行了4道次ECAP(Equal Channel Angular Pressing)变形,成功制得表面光滑无裂纹试样,并对其力学性能和微观组织进行了检测分析.结果表明,工业纯钛经室温4道次ECAP变形后,原始晶粒细化到170 nm左右,显微维氏硬度和抗拉强度分别由1 792 MPa、438 MPa提高到2 486 MPa、728 MPa,且保持良好的塑性,断后伸长率为21.4％.
参考文献
| [1] | Ruslan Z. Valiev;Terence G. Langdon .Principles of equal-channel angular pressing as a processing tool for grain refinement[J].Progress in materials science,2006(7):881-981. |
| [2] | 王庆娟,王清平,杜忠泽.等径弯曲通道变形制备超细晶铜的力学行为[J].特种铸造及有色合金,2011(10):887-890. |
| [3] | 刘自乾,冯小明,张会.等通道转角挤压镁合金的微观组织和力学性能[J].热加工工艺,2010(11):28-30,33. |
| [4] | 王效岗,赵西成.等径弯曲通道变形对超低碳钢组织及性能的影响[J].钢铁研究学报,2007(05):54-57. |
| [5] | 刘咏,唐志宏,周科朝,李志友.纯铝等径角挤技术（Ⅰ）--显微组织演化[J].中国有色金属学报,2003(01):21-26. |
| [6] | A. Balyanov;J. Kutnyakova;N. A. Amirkhanova;V. V. Stolyarov;R. Z. Valiev;X. Z. Liao;Y. H. Zhao;Y. B. Jiang;H. F. Xu;T. C. Lowe .Corrosion resistance of ultra fine-grained Ti[J].Scripta materialia,2004(3):225-229. |
| [7] | V. V. Stolyarov;R. Z. Valiev;Y. T. Zhu .Enhanced low-temperature impact toughness of nanostructured Ti[J].Applied Physics Letters,2006(4):041905-1-041905-3-0. |
| [8] | Vladimir V. Stolyarov;Y. Theodore Zhu;Igor V. Alexandrov;Terry C. Lowe;Ruslan Z. Valiev .Influence of ECAP routes on the microstructure and properties of pure Ti[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):59-67. |
| [9] | Woo-Jin Kim;Chang-Young Hyun;Ho-Kyung Kim .Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation[J].Scripta materialia,2006(10):1745-1750. |
| [10] | K. Xia;J.T. Wang;X. Wu .Equal channel angular pressing of magnesium alloy AZ31[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):324-327. |
| [11] | Xicheng Zhao;Wenjie Fu;Xirong Yang .Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature[J].Scripta materialia,2008(5):542-545. |
| [12] | Zhao, X.;Yang, X.;Liu, X.;Wang, X.;Langdon, T.G. .The processing of pure titanium through multiple passes of ECAP at room temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(23):6335-6339. |
| [13] | 赵西成,王幸运,杨西荣,王成,刘晓燕.120°模具室温8道次ECAP变形TA1纯钛的组织与性能[J].稀有金属材料与工程,2011(01):28-31. |
| [14] | Zhang, Y.;Figueiredo, R.B.;Alhajeri, S.N.;Wang, J.T.;Gao, N.;Langdon, T.G. .Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(25/26):7708-7714. |
| [15] | KYUNG-TAE PARK;DONG HYUK SHIN .Microstructural Interpretation of Negligible Strain-Hardening Behavior of Submicrometer-Grained Low-carbon Steel during Tensile Deformation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(3):705-707. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%