欢迎登录材料期刊网

材料期刊网

高级检索

研究激光熔化沉积TC4钛合金亚临界点退火显微组织特征及显微组织演变规律,研究退火温度及退火后冷却方式(水冷、空冷)对组织形态的影响规律。结果表明,激光熔化沉积TC4钛合金在Tβ温度以下15~25℃范围内等温退火后,获得由蟹状初生α及细小层片状β转变组织组成的"特种双态组织"。随退火温度升高,蟹状形态特征愈加明显,但体积分数降低,宽度增加,长径比减小。亚临界退火后冷却过程中β→α+β转变的充分进行及一定固溶温度以产生足够的β相是蟹状初生α及特种双态组织形成的必要条件。

Characteristics and evolution of microstructure in a laser melting deposited TC4 fifanium alloy after annealing treatments were investigated.Effects of annealing temperature and cooling ways on the microstructure were examined.A unusual bi-model microstructure consisting of coarse crab-like primary α and fine lamellar transformed β is obtained by sub-critical annealing in the temperature range of 15-25 ℃ below β-transus temperature in the laser melting deposited TC4 alloy.The crab-like morphology becomes more manifest with increasing annealing temperature.The volume fraction and aspect ratio of coarse primary α decreases,while the width of coarse primary α increases with increasing annealing temperature.Decomposition of β phase during air cooling after sub-critical annealing and plenty volume faction of β phase by annealing above a certain temperature is necessary for the formation of crab-like primary α and the bi-model microstructure.

参考文献

[1] 王华明,张凌云,李安,蔡良续,汤海波,吕旭东.先进材料与高性能零件快速凝固激光加工研究进展[J].世界科技研究与发展,2004(03):27-31.
[2] Bolisowa E A;Chen S Q.Metallography of Titanium Alloys[M].Beijing:Defense Industrial Prerss,1986:246,214,227,199.
[3] 张霜银,林鑫,陈静,黄卫东.热处理对激光成形TC4合金组织及性能的影响[J].稀有金属材料与工程,2007(07):1263-1266.
[4] ZHANG Shuangyin,LIN Xin,CHEN Jing,HUANG Weidong.Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy[J].稀有金属(英文版),2009(06):537-544.
[5] 谢旭霞,张述泉,汤海波,李安,方艳丽,李鹏,王华明.退火温度对激光熔化沉积TA15钛合金组织和性能的影响[J].稀有金属材料与工程,2008(09):1510-1515.
[6] X.J. Tian;S.Q. Zhang;A. Li;H.M. Wang .Effect of annealing temperature on the notch impact toughness of a laser melting deposited titanium alloy Ti–4Al–1.5Mn[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(7/8):1821-1827.
[7] 冯冉,寇宏超,常辉,李金山,薛祥义,王义红,周廉.固溶处理对一种近α钛合金显微组织的影响[J].稀有金属材料与工程,2008(10):1785-1789.
[8] 杨义,徐锋,黄爱军,李阁平.全片层BT18Y钛合金在α+β相区固溶时的显微组织演化[J].金属学报,2005(07):713-720.
[9] T. Furuhara;T. Ogawa;T. Maki .Atomic structure of interphase boundary of an a precipitate plate in a p Ti-Cr alloy[J].Philosophical Magazine Letters,1995(3):175-183.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%