用MSC.Marc软件模拟了3种不同装粉方式下钛粉压制成形过程中粉末的流动情况及压坯的密度分布规律.结果表明:粉末装粉方式对粉末压制过程及压坯密度有较大的影响,与平式装粉方式相比,采用凸式装粉,试样的烧结坯密度提高了6%,孔隙分布的均匀性也得到相应的改善.
参考文献
[1] | Cocks A C F .Constitutive modeling of powder compaction and sintering[J].Process in Materials Science,2001,46(3/4):201-229. |
[2] | Cocks A C F .The structure of constitutive laws for the sintering of fine grained materials[J].Acta Metallurgica Et Materialia,1994,42(07):2191-2210. |
[3] | Pierre Doremus;Edith Pavier;Joelle Kergadallan;Gerard Puente .Axisymmetric part compaction: data base for numerical simulation[J].International Journal of Powder Metallurgy,1999(3):63-69. |
[4] | Cocks A C F .Inelastic deformation of porous bodies[J].Journal of the Mechanics and Physics of Solids,1989,37(03):693-672. |
[5] | Akisanya A R;Cocks A C F;Fleck N A .Hydrostatic compaction of cylindrical particles[J].Journal of the Mechanics and Physics of Solids,1994,42(07):1067-1085. |
[6] | Fleck NA. .ON THE COLD COMPACTION OF POWDERS[J].Journal of the Mechanics and Physics of Solids,1995(9):1409-1431. |
[7] | PM Modnet Research Group .Numerical simulation of powder compaction for two multilevel ferrous parts, including powder characterisation and experimental validation[J].Powder Metallurgy,2002(4):335-344. |
[8] | Chuan-Yu Wu;Alan C.F. Cocks;Olivier T. Gillia .DIE FILLING AND POWDER TRANSFER[J].International Journal of Powder Metallurgy,2003(4):51-64. |
[9] | Morimto Y;Hayashi T;Takei T .Mechanical behavior of powder during compaction a mold with variable cross sections[J].The International Journal of Powder Metallurgy and Powder Technology,1982,18(02):129-145. |
[10] | LEWIS R W .Computer-aided simulation of metal powder die compaction processes[J].Powder Metallurgy,1993,25(06):287-293. |
[11] | 贺峻;康永林;任学平 .粉末构件CIP成形过程有限元数值模拟[J].材料科学与工艺,1997,7(zk):186-189. |
[12] | 陈火红.Marc有限元实例分析教程[M].北京:机械工业出版社,2002:271-272. |
[13] | Gethin D T;Tran V D;Lewis R W et al.An investigation of powder compaction process[J].International Journal of Powder Metallurgy,1994,30(04):385-398. |
[14] | 王盘鑫.粉末冶金学[M].北京:冶金工业出版社,1997:120-124. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%