欢迎登录材料期刊网

材料期刊网

高级检索

采用X射线衍射、透射电镜观察研究了Fe-17Mn-5Si-10Cr-5Ni形状记忆合金不同变形条件下的应力诱发ε马氏体相变及其形状记忆效应。研究表明,停载时间为0~10 min时,试验合金形状恢复率随停载时间的增加而迅速增大,停载时间超过10min时,虽然应力诱发ε马氏体量增多,但形状恢复率却减小,造成这一现象的原因是应力诱发ε马氏体的稳定化。合金试样停载10 min可以有效地提高合金的形状记忆恢复率。

Stress induced ε-martensite transformation and shape memory effect in a Fe-17Mn-SSi-10Cr-SNi shape memory alloy with different deformations conditions were studied by XRD analysis and TEM observation. The results show that the shape recovery ratio rapidly increases when the suspending loading time is in the range of 0-10 min, but when the suspending loading time is above 10 min the amount of the stress induced martensite increases and the shape recovery ratio decreases with the increasing of suspending loading time. This is owing to the stabilization of the stress induced ε-martensite. Suspending loading for 10 rain can effective improves the shape recovery ratio of Fe-Mn-Si alloy.

参考文献

[1] 乔志霞,刘永长,王江宏,孟毅,王东爱.预应变对Fe-Mn-Si记忆合金中应力诱发εM形态的影响[J].材料科学与工程学报,2008(01):46-48,52.
[2] 乔志霞;谷南驹;李宗民 .Fe-Mn-Si记忆合金中应力诱发FM亚结构及生长机制的HREM研究[J].功能材料,2006,37(增刊):684-686.
[3] 乔志霞,刘永长,王东爱,宁保群,李宗民.Fe-Mn-Si记忆合金中应力诱发γ→εM的相变机制[J].材料科学与工程学报,2007(05):667-670.
[4] 刘春成;姚可夫;高国峰 等.应力应变对马氏体相变动力学及相变塑性影响的研究[J].金属学报,1999,35(11):1125-1129.
[5] Gu Q;Federaoni L;Jang W Y.and "y-e--+cL' transformation in a Fe-Mn-Si based shape memory steel[A].北京,1994:488-492.
[6] 邱平善;王桂芳;郭立伟.材料近代分析测试方法实验指导[M].哈尔滨:哈尔滨工程大学出版社,2001
[7] 王小祥;赵连成 .Fe-Mn-Si-Ni-Co合金中形变应力诱发8马氏体的稳定化及其对记忆效应的影响[J].功能材料,1994,25(05):440-444.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%