欢迎登录材料期刊网

材料期刊网

高级检索

以酚醛树脂的乙醇溶液为原料,导热油和硅油混合油为油相,在不添加任何乳化剂的情况下,采用反相乳液法制得酚醛树脂微米球。重点考察了合成条件对树脂成球的影响,并探讨了体系的成球机制。结果表明,引入黏度低、导热性能好、可与酚醛树脂形成强π-π相互作用的导热油对合成树脂微球起关键作用。混合油质量比、酚醛和乙醇配比及搅拌速度在较宽范围内变化时,制得的酚醛树脂微球经800℃炭化均能获得球形度良好的炭微米球。优化条件下(导热油和硅油质量比为4:1,乙醇和酚醛质量比为4:1,搅拌速度为2000 r/min),可获得球形度好、尺寸分布较窄的炭微米球(5~20μm)。该球经KOH活化后,当电流密度为1 A/g时,比电容可达206 F/g,电流密度为20 A/g时,比电容仍然保持在134 F/g。这些优异的电化学性质归因于炭球高的比表面积和合适的孔道结构。

Porous phenolic resin-based carbon microspheres were prepared by inverse emulsion polymerization, followed by car-bonization at 800 ℃ for 1 h and KOH activation at 800 ℃ for 1 h with a KOH/coke mass ratio of 4. Thermal setting phenolic resin in ethanol was used as one phase and a mixture oil of silicone oil and heat transfer oil as the other phase in the inverse emulsion poly-merization. The performance of the porous spheres as electrode materials in supercapacitors was investigated. Results indicate that the size and morphology of the spheres are mainly determined by the mass ratio of silicone oil to heat conduction oil, the mass ratio of alcohol to phenolic resin and the stirring speed. The heat transfer oil with alkyl benzene size chains interacts with phenolic resin by a π-π interaction, which is beneficial for the formation of microspheres. The porous spheres prepared under the optimum condi-tions have a high specific capacitance of 206 and 134 F/g at current densities of 1 A/g and 20 A/g, respectively in a 6 M KOH elec-trolyte. The good capacitive and rate performance can be ascribed to the high specific surface area and the pore structures.

参考文献

[1] 宋涛;廖景明;肖军;沈来宏.生物质活性炭微孔和中孔结构对CO2吸附性能的影响[J].新型炭材料,2015(2):156-166.
[2] Han, Weiliang;Tang, Zhicheng;Zhang, Peng;Lu, Gongxuan.Fabrication of porous carbon spheres and as support for the application of low-temperature CO oxidation[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2015Sep.30(Sep.30):100-108.
[3] Xiaomei Ma;Lihua Gan;Mingxian Liu.Mesoporous size controllable carbon microspheres and their electrochemical performances for supercapacitor electrodes[J].Journal of Materials Chemistry, A. Materials for energy and sustainability,201422(22):8407-8415.
[4] J.A. Menendez;E.J. Juarez-Perez;E. Ruisanchez.A microwave-based method for the synthesis of carbon xerogel spheres[J].Carbon: An International Journal Sponsored by the American Carbon Society,201210(10):3555-3560.
[5] Nilantha P. Wickramaratne;Mietek Jaroniec.Activated Carbon Spheres for CO2 Adsorption[J].ACS applied materials & interfaces,20135(5):1849-1855.
[6] Hui Wang;Liyi Shi;Tingting Yan.Design of graphene-coated hollow mesoporous carbon spheres as high performance electrodes for capacitive deionization[J].Journal of Materials Chemistry, A. Materials for energy and sustainability,201413(13):4739-4750.
[7] Qiao, Z.-A.;Guo, B.;Binder, A.J.;Chen, J.;Veith, G.M.;Dai, S..Controlled synthesis of mesoporous carbon nanostructures via a "silica-assisted" strategy[J].Nano letters,20131(1):207-212.
[8] 沈秋惠;闵洁;孙国瑞;李长洁;厉建丽;王莉莉.热固性酚醛树脂基微球的制备方法的研究[J].炭素,2010(4):28-32.
[9] Liu, Ling;Liao, Liuhui;Meng, Qinghan;Cao, Bing.High performance graphene composite microsphere electrodes for capacitive deionisation[J].Carbon: An International Journal Sponsored by the American Carbon Society,2015:75-84.
[10] Tata, Agnieszka;Sokolowska, Katarzyna;Swider, Joanna;Konieczna-Molenda, Anna;Proniewicz, Edyta;Witek, Ewa.Study of cellulolytic enzyme immobilization on copolymers of N-vinylformamide[J].Spectrochimica acta, Part A. Molecular and biomolecular spectroscopy,2015:494-504.
[11] Toshihide Horikawa;Jun'ichi Hayashi;Katsuhiko Muroyama.Size control and characterization of spherical carbon, aerogel particles from resorcinol-formaldehyde resin[J].Carbon: An International Journal Sponsored by the American Carbon Society,20041(1):169-175.
[12] Jiang, Liping;Liu, Peng;Zhao, Shibin.Magnetic ATP/FA/Poly(AA-co-AM) ternary nanocomposite microgel as selective adsorbent for removal of heavy metals from wastewater[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,2015:31-38.
[13] Benda D;Snuparek J;Cermak V;SYNPO RES PARDUBICE 53207 CZECH REPUBLIC..Inverse emulsion polymerization of acrylamide and salts of acrylic acid[J].European Polymer Journal,19978(8):1345-1352.
[14] Kiatkamjornwong Suda;Phunchareon Pattama.Influence of reaction parameters on water absorption of neutralized poly(acrylic acid-co-acrylamide) synthesized by inverse suspension polymerization[J].Journal of Applied Polymer Science,199910(10):1349-1366.
[15] Liping Jiang;Peng Liu.Covalently crosslinked fly ash/poly(acrylic acid-co-acrylamide) composite microgels as novel magnetic selective adsorbent for Pb~(2+) ion[J].Journal of Colloid and Interface Science,2014:64-71.
[16] Jahanzad, F;Sajjadi, S;Brooks, BW.Comparative study of particle size in suspension polymerization and corresponding monomer-water dispersion[J].Industrial & Engineering Chemistry Research,200511(11):4112-4119.
[17] Xiqing Wang;Je Seung Lee;Costas Tsouris.Preparation of activated mesoporous carbons for electrosorption of ions from aqueous solutions[J].Journal of Materials Chemistry: An Interdisciplinary Journal dealing with Synthesis, Structures, Properties and Applications of Materials, Particulary Those Associated with Advanced Technology,201022(22):4602-4608.
[18] E. Raymundo-Pinero;K. Kierzek;J. Machnikowski.Relationship between the nanoporous texture of activated carbons and their capacitance properties in different electrolytes[J].Carbon: An International Journal Sponsored by the American Carbon Society,200612(12):2498-2507.
[19] Chmiola J;Yushin G;Gogotsi Y;Portet C;Simon P;Taberna PL.Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer[J].Science,20065794(5794):1760-1763.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%