系统分析了国内外在粉末高温合金缺陷特性及寿命预测方法方面的研究进展,如缺陷的来源及对寿命的影响,缺陷对裂纹萌生和扩展的影响,粉末高温合金寿命预测方法和模型.在研究目前国内外寿命预测方法的基础上,结合我国粉末高温合金寿命预测存在的问题,指出必须考虑缺陷特性并对缺陷进行定量表征,建立反映粉末高温合金特点和缺陷特性的寿命预测方法.
参考文献
| [1] | 邹金文,汪武祥.粉末高温合金研究进展与应用[J].航空材料学报,2006(03):244-250. |
| [2] | 周磊,王泓,张国栋,苏彬.镍基粉末高温合金FGH96应变疲劳行为[J].塑性工程学报,2009(05):149-154. |
| [3] | 雷景富,郑勇,余俊,吕学鹏,杜娜.镍基粉末高温合金的研究进展[J].宇航材料工艺,2011(06):18-22. |
| [4] | 程茜,董建新,张麦仓.三代粉末高温合金的特征及发展[J].世界钢铁,2011(05):43-51. |
| [5] | 吴凯,刘国权,胡本芙,张义文,陶宇,刘建涛.新型涡轮盘用高性能粉末高温合金的研究进展[J].中国材料进展,2010(03):23-32. |
| [6] | 张丽娜,张麦仓,李晓,谢锡善.粉末高温合金中非金属夹杂物问题的研究进展[J].兵器材料科学与工程,2001(03):64-68. |
| [7] | 赵军普,陶宇,袁守谦,贾建,韩寿波.粉末冶金高温合金中的原始颗粒边界（PPB）问题[J].粉末冶金工业,2010(04):43-49. |
| [8] | 于军,葛昌纯,孟璐璐,沈卫平,燕青芝,孟月东.火花等离子体放电制备高温合金细粉新技术[J].金属学报,2008(07):892-896. |
| [9] | 王淑云,李惠曲,谭勇,杨洪涛.热等静压FGH96合金热处理过程的组织[J].新技术新工艺,2008(11):103-105. |
| [10] | 谢君,田素贵,周晓明.热等静压温度对FGH95合金组织及点阵常数的影响[J].材料热处理学报,2011(11):59-63. |
| [11] | 李惠曲,王淑云,东赘鹏,杨洪涛,谭勇.粉末高温合金等温锻造过程非金属夹杂物的变形特征[J].新技术新工艺,2009(05):93-95. |
| [12] | Radavich J;Carneiro T;Furrer D et al.Effect of processing and composition on the structure and properties of PM EP741NP type alloys[J].Chin J Aeronaut,2007,20:97. |
| [13] | Appa Rao G;Srinivas M;Sarma D S .Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,435-436:84. |
| [14] | 赵丰,姚草根,范开春,黄国基.粉末GH4169合金中的原始颗粒边界问题[J].宇航材料工艺,2012(01):92-94. |
| [15] | 赵军普;袁守谦;陶宇 等.高温扩散退火对FGH96粉末高温合金中PPB的影响[J].材料导报:研究篇,2010,24(09):65. |
| [16] | 刘趁意,王淑云,李付国,东赟鹏.粉末高温合金挤压变形组织及变形机理研究[J].锻压装备与制造技术,2009(01):84-87. |
| [17] | 刘洋,陶字,贾建.FGH98粉末冶金高温合金热变形过程中组织变化[J].粉末冶金工业,2011(02):14-18. |
| [18] | Barrie R L;Gabb T P;Telesman J .Effectiveness of shot peening in suppressing fatigue cracking at non-metallic inclusions in Udimet 720[J].Materials Science and Engineering,2008,474:71. |
| [19] | Shailesh J Patel;Ian C Elliott.Production of high-strength P/M disc alloys by superclean cast/wrought technology[M].PA.Champion,1992:13. |
| [20] | Shamblen S E;Chang D R .Effect of inclusions on LCF life of HIP plus heat treated powder metal Rene95[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1985,168(12):775. |
| [21] | Jablonski D A .The effect of ceramic inclusions on the low cycle fatigue life of low carbon Astroloy subjected to hot isostatic pressing[J].Materials Science and Engineering,1981,48:189. |
| [22] | Bretheau T.Inclusion/ matrix mechanical interaction an in situ study by tensile and fatigue tests in the scanning electron microscope[A].Finland,1988 |
| [23] | Ambroise W H.Crack initiation from the interface of superficial inclusions[A].北京,1987:169. |
| [24] | H. U. Hong;I. S. Kim;B. G. Choi;H. W. Jeong;C. Y. Jo .Effects Of Temperature And Strain Range On Fatigue Cracking Behavior In Hastelloy X[J].Materials Letters,2008(28):4351-4353. |
| [25] | Sofiane Terzi;Raphael Couturier;Laure Gu′etaz;Bernard Viguier.Modelling the plastic deformation during high-temperature creep of a powder-metallurgy coarse-grained superalloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008:598-601. |
| [26] | Lee K O;Bae K H;Lee S B .Comparison of prediction methods for low-cycle fatigue life of HIP superalloys at elevated temperature for turbopump reliability[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,519:112. |
| [27] | Huron E S;Bain K R;Mourer D P.Development of high temperature capability p/M disk superalloys[A].Pennsylvania:TMS,2008:181. |
| [28] | Pineau A;Antolovich S D .High temperature fatigue of nickel-base superalloys-A review with special emphasis on deformation modes and oxidation[J].Engineering Failure Analysis,2009,16:2668. |
| [29] | Leo Prakash D G;Walsh M J;Maclachlan D et al.Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue,creep and oxidation[J].International Journal of Fatigue,2009,31:1966. |
| [30] | Caton M J;Jha S K .Small fatigue crack growth and failure mode transitions in a Ni-base superalloy at elevated temperature[J].International Journal of Fatigue,2010,32:1461. |
| [31] | Hardy M C;Zirbel B;Shen G.Developing damage tolerance and creep resistance in high strength nickel alloy for disk applications[A].Pennsylvania:TMS,2004:83. |
| [32] | Wenju Ren;Theodore Nicholas .Effects and mechanisms of low cycle fatigue and plastic deformation on subsequent high cycle fatigue limit in nickel-base superalloy Udimet 720[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2002,332:236. |
| [33] | Rahmani, K;Nategh, S .Low cycle fatigue mechanism of Rene 80 at high temperature-high strain[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):385-390. |
| [34] | Jiashi Miao;Tresa M. Pollock;J. Wayne Jones .Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy[J].Acta materialia,2012(6/7):2840-2854. |
| [35] | Bernstein H L .An evaluation of four current models to predict the creep-fatigue interaction in Rene95[R].US,1975. |
| [36] | Menon M N .Life prediction techniques for analysis creepfatigue interaction in advanced nickel-base superalloys[R].Ohio,1976. |
| [37] | Bernstein H L .A stress-strain-time model for high-temperature low cycle fatigue[R].US,1979. |
| [38] | Kh. Rahmani;S. Nategh .Low cycle fatigue mechanism of Rene′ 80 at high temperature–high strain[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):385-390. |
| [39] | Grison J;Remy L .Fatigue failure probability in a powder metallurgy Ni-base superalloy[J].Engineering Fracture Mechanics,1997,57(01):41. |
| [40] | 刘明东,张莹,刘培英,张义文.FGH95粉末高温合金原始颗粒边界及其对性能的影响[J].粉末冶金工业,2006(03):1-5. |
| [41] | 张莹,刘明东,张义文."黑粉"对PM镍基粉末高温合金组织性能的影响[J].粉末冶金工业,2006(06):1-5. |
| [42] | 谢君,田素贵,周晓明,李柏松.固溶温度对粉末镍基高温合金组织与蠕变行为的影响[J].粉末冶金技术,2011(04):263-268. |
| [43] | 郭伟彬.夹杂物对粉末高温合金疲劳性能的影响[J].理化检验-物理分册,2008(05):231-234. |
| [44] | 杜劲,刘战强.夹杂物对FGH95粉末高温合金切削加工力学特性的影响[J].组合机床与自动化加工技术,2011(04):19-23. |
| [45] | 刘新灵 .FGH96粉末高温合金断裂特性与耐久性研究[D].北京:北京航空材料研究院,2008. |
| [46] | 宁永权,姚泽坤,谢兴华,郭鸿镇,谭立军,陶宇.热模锻造+直接时效粉末高温合金的强化机制[J].金属学报,2010(03):324-328. |
| [47] | 周晓明,汪殿龙,汪煜,汪武祥.非金属夹杂物在镍基粉末高温合金中的变形行为[J].失效分析与预防,2008(03):23-27. |
| [48] | 刘新灵,陈星,侯学勤,陶春虎.FGH95粉末冶金高温合金损伤与断裂特性研究[J].稀有金属材料与工程,2009(07):1179-1183. |
| [49] | 陈勇,宋迎东,高德平,范绪箕.热、机械载荷作用下夹杂对应力强度因子的影响[J].计算力学学报,2005(06):776-779,784. |
| [50] | 赵勇铭 .夹杂物对粉末冶金涡轮盘应力强度因子及裂纹扩展寿命的影响研究[D].南京航空航天大学,2004. |
| [51] | 吴凯,刘国权,胡本芙,李峰,张义文,陶宇,刘建涛.新型镍基粉末高温合金的高温变形行为[J].航空材料学报,2010(04):1-7. |
| [52] | 刘洋,陶宇,贾建.镍基粉末高温合金FGH98流变曲线特性及本构方程[J].航空材料学报,2011(06):12-18. |
| [53] | 林涛,何玉怀.粉末高温合金的低周疲劳研究进展[J].理化检验：物理分册,2011(11):697-701. |
| [54] | 王璞,董建新,张义文,谢锡善.热处理对FGH96粉末高温合金裂纹扩展速率的影响[J].稀有金属材料与工程,2010(01):157-161. |
| [55] | 张国栋,刘绍伦,何玉怀,苏彬,汪武祥,杨治国.粉末冶金盘材料FGH95热机械疲劳寿命预测[J].失效分析与预防,2008(01):54-58. |
| [56] | 刘相新 .基于损伤力学的粉末高温合金(FGH95)寿命预测及实验研究[D].北京:北京航空航天大学,2002. |
| [57] | 胡绪腾 .粉末高温合金高温疲劳寿命模型研究[D].南京航空航天大学,2005. |
| [58] | 刘新灵,陶春虎.FGH96粉末高温合金损伤行为与寿命预测[J].失效分析与预防,2011(02):124-129. |
| [59] | 魏大盛,杨晓光,王延荣.基于缺陷概率特点的粉末冶金材料寿命预测概率模型[J].航空动力学报,2005(06):951-957. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%