欢迎登录材料期刊网

材料期刊网

高级检索

目的研究代替铬酸阳极氧化和稀铬酸氧化膜层封闭处理的工艺。方法在硼硫酸阳极氧化溶液中添加不同的稀土盐对铝合金进行阳极氧化,采用稀土盐对氧化膜层进行封闭处理,分析对比膜质量及膜层耐腐蚀性能。结果在硼硫酸阳极氧化溶液中加入稀土A盐能够提高氧化膜层的耐腐蚀性能,用稀土C盐溶液对该阳极氧化膜层进行封闭处理,可以进一步提高氧化膜层的耐腐蚀性能,耐中性盐雾腐蚀时间达到336 h。结论稀土A盐改进的硼硫酸阳极氧化/C盐封闭技术有望代替铬酸阳极氧化技术。

ABSTRACT:Objective To study the technology of anodic oxidation without chromate acid and sealing the oxidation film without dilute chromic acid. Methods The anodic oxidation film was prepared in the boron sulfuric acid anodic oxidation solution containing different rare earth salts, and then sealed in solutions containing rare earth salts. The film quality and corrosion resistance of the films were comparatively analyzed. Results Adding rare earth A salt into boron sulfuric acid anodic oxidation solution could improve the anti-corrosion property of the oxidation film, and sealing the as-prepared anodic oxidation film with rare earth C salt could fur-ther improve the anti-corrosion property of the oxidation film. This film could be intact after being placed for 336 h in NSS environ-ment. Conclusion The boron sulfuric acid anodic oxidation modified by rare earth A salt and sealed by rare earth C salt is expected to replace the chromic acid anodizing technology.

参考文献

[1] 孙振起,黄明辉.正交试验法优化铝锂合金表面处理工艺研究[J].表面技术,2011(03):68-70.
[2] 孙衍乐,宣天鹏,徐少楠,张敏.铝合金的阳极氧化及其研发进展[J].电镀与精饰,2010(04):18-21.
[3] L. Zhang;G. E. Thompson;M. Curioni .Anodizing of Aluminum in Sulfuric Acid/Boric Acid Mixed Electrolyte[J].Journal of the Electrochemical Society,2013(4):C179-C184.
[4] Anne Deacon Juhl .Overview of Anodizing in the Aerospace Industry[J].Metal finishing,2010(2):20-21.
[5] 刘佑厚,井玉兰.铝合金硼酸-硫酸阳极氧化工艺研究[J].电镀与精饰,2000(06):8-11.
[6] Bensalah, W.;Elleuch, K.;Feki, M.;Depetris-Wery, M.;Ayedi, H.F..Optimization of tartaric/sulphuric acid anodizing process using Doehlert design[J].Surface & Coatings Technology,2012:123-129.
[7] 杨景伟,赵永岗,孙杰,胡胜楠,王辉,李振瑜.铝合金铬酸阳极氧化后表面缺陷分析[J].表面技术,2014(02):72-74,94.
[8] 王帅星,赵晴,杜楠,邵志松,舒伟发,陈庆龙.铈盐对铝合金硼酸-硫酸阳极氧化膜的封闭效应[J].中国有色金属学报,2012(04):1132-1141.
[9] 于美,陈高红,刘建华,李松梅,李英东,刘洲.己二酸对铝合金硫酸阳极氧化疲劳性能的影响[J].金属热处理,2011(06):50-53.
[10] SPADAFORA S J;PEPE F R .A Comparison of Boric-Sulfu-ric Acid Anodize and Chromic Acid Anodize Processes[J].Metal Finishing,1994,92(04):53-57.
[11] 王加余,李澄,尹成勇,李西娟,王艳慧.硼-硫酸-草酸电解液降压阳极氧化疏孔膜层制备及表征[J].腐蚀科学与防护技术,2014(02):154-158.
[12] 刘建华,刘洲,于美,李松梅,陈高红.3种溶液体系下铝合金阳极氧化膜的性能[J].中国有色金属学报,2012(07):2031-2039.
[13] M. SAEEDIKHANI,M. JAVIDI,A. YAZDANI.2024-T3铝合金在硫酸-硼酸-磷酸中的阳极氧化和腐蚀行为[J].中国有色金属学报(英文版),2013(09):2551-2559.
[14] 颜杰红,彭超.苯甲酸钠含量对硼酸-硫酸阳极氧化膜形貌和性能的影响[J].材料保护,2013(10):18-19,43.
[15] 孙衍乐,宣天鹏,许少楠,张敏.硫酸铈对铝合金阳极氧化膜耐蚀性的影响[J].电镀与精饰,2011(02):37-40.
[16] 张培,赵旭辉,唐聿明,左禹.铝阳极氧化膜的微观结构及沸水封闭处理对膜层显微硬度的影响[J].表面技术,2013(05):45-47,51.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%