本文利用表面热膜对某高负荷压气机叶片吸力面附面层的分离过程进行了实验研究,捕捉到了边界层分离点的位置及其随攻角的变化情况,给出了利用表面热膜测量的准壁面剪切应力米预判分离先兆和分离点位置的判据.同时,分析了 Re数对附面层分离特性的影响.结果表明:准壁面剪切应力及其均方根极小值对应的位置点是进入分离泡内的第一个测量点;在所有测量的工况条件下,表面热膜都捕捉到了吸力面附面层的长分离泡,并能准确捕捉到攻角所引起的分离点位置变化;低Re数下,Re数对附面层分离影响较小.
参考文献
| [1] | Hoson H P .Boundary-Layer Transition and Separation near the Trailing Edge of High-Speed Turbine Blade[J].ASME Journal of Engineering for Power,1985,106:391-399. |
| [2] | I Popovic;J Zhu;W Dai et al.Aerodynamics of a Family of Three Highly Loaded Low-Pressure Turbine Airfoils:Measured Effects of Reynolds Number and Turbulence Intensity in Steady Flow[R].ASME,2006. |
| [3] | 尹军飞.激光测速测量湍流分离-再附流动[J].航空学报,1990(05):257. |
| [4] | Bellhouse B J;Schultz D L .Determination of Mean and Dynamic Skin Friction,Separation and Transition in Low-Speed Flow with a Thin-Film Heated Element[J].Journal of Fluid Mechanics,1966,24:379-400. |
| [5] | Hodson H P .Measurements of Wake-Generated Unsteadiness in the Rotor Passage of Axial Flow Turbines[J].Journal of Engineering for Gas Turbines and Power,Transactions of the ASME,1985,107:467-476. |
| [6] | Ali Mahallati .Aerodynamics of a Low-Pressure Turbine Airfoil Under Steady and Periodically Unsteady conditions[D].Canada:Carleton University,2003. |
| [7] | 王明杰,雷志军,朱俊强.压气机叶片附面层转捩的试验研究[J].工程热物理学报,2008(03):419-422. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%