随着计算机技术的飞速发展,以计算机为基础的数值模拟技术已经在工业界得到了广泛的应用,如,钢铁在经历热轧,成型等一系列加工操作到最后的成品的整个过程中,都需要一系列的在线模拟程序的控制以确保最终产品的质量与性能.同时,在对整个工业操作过程,尤其是复杂材料的加工操作过程的改进展优化设计中,数值模拟方法已经成为不可缺少的研究手段.本文针对呈现弹性及粘塑性的软固体材料,纵览了对此类材料加工过程改进及优化研究中有限元模拟技术所担负的责任,并指出了在模拟过程中的关键难题在于对加工材料本征特性模型的建立及对于工件-模具界面间的摩擦条件的处理,同时,也对加工过程的数值模拟方法的未来进行了展望.
参考文献
[1] | Irons, B.M;Zienkiewicz, O.C.The isoparametric finite element system-a new concept in finite element analysis[A].Roval Aero Soc,1968 |
[2] | 朱有利 等.用有限变形弹塑性有限元法对金属塑性成形工艺的分析和优化[J].金属成形工艺,1996,14(04):35-38. |
[3] | Tjotta SandMo A .A constitutive model for cold deformation of aluminium at large strains and high strain rates[J].International Journal of Plasticity,1993,9:461-478. |
[4] | Irons, B.M;Zienkiewicz, O.C.The isoparametric finite element system-a new concept in nite element analysis[A].Royal Aero Soc,1968 |
[5] | Carter WTandLee D .Further analysis of axisymmetric upsetting[J].Journal of Engineering for Industry-Transactions of the ASME,1986,108:198-204. |
[6] | Houlston R;Vickers. G W;Anderson. D.L.A finite element and experimental study of rigid-plastic compression[M].Int for Numerical Methods in Eng,1986:231407-1437. |
[7] | Huang Z;LucasM.The complex computer simulation of material flow in upsetting[J].材料导报 |
[8] | Huang,Z;Lucas. M;Adams, M.J.Influence of vibration on squeeze flow of a viscoplastic matcrial[A].Cincinnati,1999:483-486. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%