{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":2,"startPagecode":1},"records":[{"abstractinfo":"以桉木单板和无机胶黏剂为原料对桉木碎料板进行<span style=\"color:red\">贴面</span>处理,研究了施胶量、成型压力、脱模养护时间对桉木碎料板弯曲性能的影响以及<span style=\"color:red\">贴面</span>处理对板材阻燃性能的影响.结果表明:施胶量、成型压力和脱模养护时间对木单板<span style=\"color:red\">贴面</span>桉木碎料板弯曲性能影响均显著.随着施胶量的增加,板材的静曲强度和弹性模量均先增大后减小,施胶量为320 g/m2时板材静曲强度和弹性模量分别达到最大值35.26 MPa和3863 MPa;随着成型压力的增加,板材的静曲强度和弹性模量也都先增大后减小,成型压力为1.5 MPa时,板材的静曲强度和弹性模量分别达到最大值35.37 MPa和3900 MPa;随着养护时间的增加,板材的静曲强度和弹性模量逐渐增大.养护3周后板材静曲强度和弹性模量基本趋于稳定.<span style=\"color:red\">贴面</span>处理使板材前期的热释放速率和热释放总量增大,阻燃性能降低.150 s后,基本表现出桉木碎料板<span style=\"color:red\">贴面</span>前的阻燃性能.","authors":[{"authorName":"乔建政","id":"1968e554-79af-46d4-80ac-c88f7293b348","originalAuthorName":"乔建政"},{"authorName":"陈茂","id":"18b717fa-1620-429e-87a5-ae835eba9bc7","originalAuthorName":"陈茂"},{"authorName":"李新功","id":"45dc5338-3811-4762-b864-d1d5820f6838","originalAuthorName":"李新功"},{"authorName":"钟文泉","id":"28eb35cc-0bc6-4f3e-b0d6-1e5a5d4dae7c","originalAuthorName":"钟文泉"},{"authorName":"符彬","id":"1a0853c9-ad89-4a38-8b68-d63225928b52","originalAuthorName":"符彬"},{"authorName":"潘亚鸽","id":"72e32f80-9d74-4e82-b879-b125c1ddd5b4","originalAuthorName":"潘亚鸽"}],"doi":"","fpage":"2852","id":"71f4176f-1e98-4d23-a93c-cb80211336ca","issue":"11","journal":{"abbrevTitle":"GSYTB","coverImgSrc":"journal/img/cover/GSYTB.jpg","id":"36","issnPpub":"1001-1625","publisherId":"GSYTB","title":"硅酸盐通报   "},"keywords":[{"id":"b0f6cf9a-8c92-405d-9e7b-d8f7aeeca3fd","keyword":"桉木单板","originalKeyword":"桉木单板"},{"id":"a002a4f3-6225-4ead-acb5-28722ff1c1f7","keyword":"无机胶黏剂","originalKeyword":"无机胶黏剂"},{"id":"a4a7a7d9-0d33-4caf-9c40-80552421a14d","keyword":"无机桉木碎料板","originalKeyword":"无机桉木碎料板"},{"id":"471f365b-e283-4478-9553-393912443077","keyword":"<span style=\"color:red\">贴面</span>","originalKeyword":"贴面"},{"id":"3d84cbed-6528-4f01-8e65-8b13cbc99f88","keyword":"性能","originalKeyword":"性能"}],"language":"zh","publisherId":"gsytb201411016","title":"桉木单板<span style=\"color:red\">贴面</span>无机桉木碎料板制备及性能","volume":"33","year":"2014"},{"abstractinfo":"由于相变材料具有改善建筑材料热工性能的特点,研究了高熔点石蜡渗透到建筑外<span style=\"color:red\">贴面</span>砖后其热调节能力的变化.将处理组和对照组在相同的热源强度下,分别测试<span style=\"color:red\">贴面</span>砖的表面温度和背面温度.实验和模拟分析结果显示,用石蜡处理后的<span style=\"color:red\">贴面</span>砖温度要比普通<span style=\"color:red\">贴面</span>砖低2～3℃.根据重庆夏季的气候特点,分析了其应用潜力,最终的目的是通过改变性能后的<span style=\"color:red\">贴面</span>砖来调节室内热环境.","authors":[{"authorName":"罗庆","id":"5d00cedb-2d16-4bbd-a6e2-77d62f522115","originalAuthorName":"罗庆"},{"authorName":"李楠","id":"4f4f2530-bd10-41f9-821c-41dd8ae1649c","originalAuthorName":"李楠"},{"authorName":"刘红","id":"ca77a376-0a34-4d42-a1fd-0dba0594251a","originalAuthorName":"刘红"},{"authorName":"李百战","id":"42bcca04-0213-4a5d-92ab-bb9ea3d311c1","originalAuthorName":"李百战"}],"doi":"","fpage":"385","id":"6bf71d93-82a8-41c1-93a3-2cf1d43fe646","issue":"Z2","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"5349b3cb-bffb-4abd-8240-c1c63ac662d7","keyword":"高熔点石蜡","originalKeyword":"高熔点石蜡"},{"id":"ee6c341c-73c7-49bd-a3d5-2fa0ec6a1c49","keyword":"<span style=\"color:red\">贴面</span>砖","originalKeyword":"贴面砖"},{"id":"fe921709-3d38-490d-a3d5-69761188d5e3","keyword":"相变材料","originalKeyword":"相变材料"},{"id":"37bd065b-c16e-4c0f-866f-b26f81d34d0a","keyword":"室内热环境","originalKeyword":"室内热环境"}],"language":"zh","publisherId":"cldb2008Z2111","title":"高熔点石蜡在建筑室外<span style=\"color:red\">贴面</span>砖中的应用性能研究","volume":"22","year":"2008"},{"abstractinfo":"使用乳白胶制备了刨切薄竹<span style=\"color:red\">贴面</span>稻草板,并分析了其物理力学性能.结果显示,饰面板材具有优异的静曲强度和弹性模量及良好的表面胶合强度,能够耐温水浸渍,但不能够耐热水浸渍；使用电镜观察了饰面板材的微观形貌,并对饰面材料进行了红外光谱分析,进一步揭示了饰面板材的性能,微观裂缝及亲水性基团的存在使得饰面板材在高温高湿的环境条件下,更易被水作用而失去胶合性能.薄竹饰面薄型稻草板,具备了薄竹优美的颜色与花纹,同时也具备了稻草刨花板优异的物理力学性能,能够作为室内装饰材料及非承重包装材料而得到广泛使用.","authors":[{"authorName":"任丽敏","id":"614ad493-f188-494d-9c73-0285476fee50","originalAuthorName":"任丽敏"},{"authorName":"王逢瑚","id":"f6af6a3f-e7f1-4c59-b1c7-4902050f72d9","originalAuthorName":"王逢瑚"},{"authorName":"张利","id":"fcf6d00b-755a-4d72-bd66-21ad436fc3b2","originalAuthorName":"张利"}],"doi":"","fpage":"1048","id":"18900ece-0a0c-41cb-8309-aba349c607f9","issue":"7","journal":{"abbrevTitle":"GNCL","coverImgSrc":"journal/img/cover/GNCL.jpg","id":"33","issnPpub":"1001-9731","publisherId":"GNCL","title":"功能材料"},"keywords":[{"id":"2155d5df-096e-4ffd-bf9d-fd2b3e52e8f1","keyword":"刨切薄竹","originalKeyword":"刨切薄竹"},{"id":"94ae744c-056b-4c2a-a336-f299f43fd7db","keyword":"稻草刨花板","originalKeyword":"稻草刨花板"},{"id":"722c1ea6-56d3-4df4-b042-3cec98a9b172","keyword":"物理力学性能","originalKeyword":"物理力学性能"},{"id":"2aa703b1-5d02-4f3e-8b47-03d30457d36e","keyword":"微观形貌","originalKeyword":"微观形貌"},{"id":"e481e6af-8821-46c2-be56-60f961d9f41b","keyword":"红外光谱","originalKeyword":"红外光谱"}],"language":"zh","publisherId":"gncl201307031","title":"薄竹<span style=\"color:red\">贴面</span>稻草板的制备与性能分析","volume":"44","year":"2013"},{"abstractinfo":"针对被动蒸发冷却技术在建筑屋顶的应用较多,而极少在建筑外墙上应用的情况,对多孔性外墙<span style=\"color:red\">贴面</span>材料在干工况和湿工况下进行了对比研究,研究结果显示多孔性外墙<span style=\"color:red\">贴面</span>材料在长江流域的被动蒸发能力>5℃,并测定了该种材料的含水能力在30%左右;提出了密实性多孔材料模拟和水分蒸发过程的数学简化模型,通过实验和模拟对比证实,这种简化是可以满足工程应用的,从而为在模拟条件下探索各种密实性多孔材料的性能提供了参考.","authors":[{"authorName":"罗庆","id":"787ffc84-4732-4bd4-bec8-14d9f2de22e5","originalAuthorName":"罗庆"},{"authorName":"李楠","id":"b382da9a-0cca-4ae1-8e02-f410454d12ea","originalAuthorName":"李楠"},{"authorName":"丁勇","id":"0c75eedb-cf1b-4fff-bf9a-65f06eface8f","originalAuthorName":"丁勇"},{"authorName":"夏煦","id":"c6d66756-7b97-4d6e-97a9-46cb1b2c013a","originalAuthorName":"夏煦"},{"authorName":"李百战","id":"45da3ba4-ce17-4080-ae1e-e8f4be4e6c0e","originalAuthorName":"李百战"}],"doi":"","fpage":"1023","id":"01f2f082-fff6-493e-a806-4ca8da43bf72","issue":"6","journal":{"abbrevTitle":"GNCL","coverImgSrc":"journal/img/cover/GNCL.jpg","id":"33","issnPpub":"1001-9731","publisherId":"GNCL","title":"功能材料"},"keywords":[{"id":"778a038a-54c7-4108-8f03-ba9c3545f92c","keyword":"多孔性材料","originalKeyword":"多孔性材料"},{"id":"08672604-ff49-485f-92e8-4c6e714be061","keyword":"外墙","originalKeyword":"外墙"},{"id":"9790b906-9ac8-4487-8f32-8c20d006ab25","keyword":"被动蒸发","originalKeyword":"被动蒸发"},{"id":"4765dfd5-8195-4bbf-ad8a-3d2192bac822","keyword":"建筑节能","originalKeyword":"建筑节能"}],"language":"zh","publisherId":"gncl200906042","title":"多孔性外墙<span style=\"color:red\">贴面</span>材料被动蒸发冷却过程研究","volume":"40","year":"2009"},{"abstractinfo":"采用脲醛树脂作为粘合剂配合异氰酸酯制备了碳纤维增强木质复合材料(Carbon Fiber Enhanced Woodiness Composites,CFEWC).在制备过程中,通过改变碳纤维和木质纤维的配比和两种纤维之间的复合形式,研究了复合材料样板的相关电学性能,并且从多个角度分析了样板电学性能变化的原因.实验结果表明:单<span style=\"color:red\">贴面</span>复合材料样板和双<span style=\"color:red\">贴面</span>复合材料样板都具有导电性,双<span style=\"color:red\">贴面</span>复合材料样板具有更良好的导电性.随着碳纤维含量比重的增大,CFEWC的导电性能逐渐提高,空穴导电和π电子的数量增加;随着温度的升高,CFEWC的表面电阻率呈现出非线性的负增长态势,更多的导电粒子获得能量被激发产生了NTC(Negative Temperature Coefficient)效应.","authors":[{"authorName":"孙丽萍","id":"5b9890d8-0d4a-498d-92f8-26c07d76533a","originalAuthorName":"孙丽萍"},{"authorName":"朱晓龙","id":"86089dda-2376-44ce-9846-4153d23531c3","originalAuthorName":"朱晓龙"},{"authorName":"张冬妍","id":"765a6f9b-acb2-42cb-bd1d-207011afee25","originalAuthorName":"张冬妍"}],"doi":"10.7502/j.issn.1674-3962.2016.11.10","fpage":"880","id":"1d82f403-8f27-48ca-9926-692f285a4530","issue":"11","journal":{"abbrevTitle":"ZGCLJZ","coverImgSrc":"journal/img/cover/中国材料进展.jpg","id":"80","issnPpub":"1674-3962","publisherId":"ZGCLJZ","title":"中国材料进展"},"keywords":[{"id":"a627a281-9116-4b5a-bdcb-77948b6c5a45","keyword":"碳纤维增强木质复合材料","originalKeyword":"碳纤维增强木质复合材料"},{"id":"224ba592-de95-4d71-b91e-a200cdc354df","keyword":"电学性能","originalKeyword":"电学性能"},{"id":"746a4070-f16b-4f03-b3d7-21d88528d3b0","keyword":"π电子","originalKeyword":"π电子"},{"id":"fa7189b4-42c1-4884-94dc-9b9dc508e4f3","keyword":"NTC效应","originalKeyword":"NTC效应"}],"language":"zh","publisherId":"zgcljz201611012","title":"碳纤维增强木质复合材料的制备与电学性能研究","volume":"35","year":"2016"},{"abstractinfo":"以设计的涂布量对砂磨的硬枫薄木<span style=\"color:red\">贴面</span>家具板件喷涂两遍水性封闭底漆、底漆和面漆.漆膜固化后,测试漆膜的耐磨性.结果表明,在一定程度上,封闭底漆的涂布量对耐磨性影响较大,底漆次之,面漆影响最小.当封闭底漆的每遍涂布量为60 g/m2、底漆的每遍涂布量为100 g/m2和面漆的每遍涂布量为120 g/m2时,漆膜具有较好的耐磨性.","authors":[{"authorName":"路则光","id":"b417dbd9-a907-486f-a9f4-42f5a76f065d","originalAuthorName":"路则光"},{"authorName":"申利明","id":"fac07ef8-3f83-4326-b15f-b43dcf2834f7","originalAuthorName":"申利明"},{"authorName":"黄河浪","id":"9a938bc1-cc2a-4034-af50-dcdbe479640d","originalAuthorName":"黄河浪"},{"authorName":"陈秀兰","id":"13189101-7fd7-43af-b58a-d3dd4c74af91","originalAuthorName":"陈秀兰"},{"authorName":"吴新凤","id":"e219f320-2303-4e90-b849-b0b32791dfdd","originalAuthorName":"吴新凤"},{"authorName":"薛丽丹","id":"df391c9a-2249-487a-9912-0931b1b8076d","originalAuthorName":"薛丽丹"}],"doi":"10.3969/j.issn.0253-4312.2007.03.015","fpage":"56","id":"08ecbdc2-c541-4e99-a565-eef6952c6850","issue":"3","journal":{"abbrevTitle":"TLGY","coverImgSrc":"journal/img/cover/TLGY.jpg","id":"61","issnPpub":"0253-4312","publisherId":"TLGY","title":"涂料工业   "},"keywords":[{"id":"7a17018d-22b3-4ba8-bb27-e3682a0921a1","keyword":"水性涂料","originalKeyword":"水性涂料"},{"id":"074e2b14-302a-4f23-9119-c3417d2c38be","keyword":"涂布量","originalKeyword":"涂布量"},{"id":"07953d17-3850-4bc9-8c0c-9346f7926f5b","keyword":"漆膜耐磨性","originalKeyword":"漆膜耐磨性"}],"language":"zh","publisherId":"tlgy200703015","title":"木器用水性涂料涂布量对漆膜耐磨性的影响","volume":"37","year":"2007"},{"abstractinfo":"根据某飞机挂架的结构特点和使用要求，结合高强度铝合金ZL205A的工艺特性,分析和讨论ZL205A合金飞机挂架的砂型铸造工艺。结果表明：立式浇注位置设计,可保证挂架整体性能、成分均匀合理；<span style=\"color:red\">贴面</span>冷铁式半金属型激冷,配以合理冒口补缩,保证铸件组织致密,性能优良;直浇道、横浇道和内浇道截面比为1∶3∶5,并配合带缓冲结构的合理缝隙,可保证型腔内液面上升平稳,减少铸件内部二次氧化夹杂和混入性气体;砂芯整体设计,可保证挂架尺寸的稳定。","authors":[{"authorName":"于桂林","id":"136fa285-1b3e-4750-9f72-64ee0bc17c21","originalAuthorName":"于桂林"}],"doi":"10.3969/j.issn.1001-4381.2001.01.014","fpage":"43","id":"60ac9ed4-341f-45f5-a5a6-bcc645f2a8ca","issue":"1","journal":{"abbrevTitle":"CLGC","coverImgSrc":"journal/img/cover/CLGC.jpg","id":"9","issnPpub":"1001-4381","publisherId":"CLGC","title":"材料工程"},"keywords":[{"id":"2803b45c-ba48-4944-acd7-1322bfaba1ec","keyword":"ZL205铝合金","originalKeyword":"ZL205铝合金"},{"id":"263e7b22-6d22-496a-bb63-2e9024ce565f","keyword":"优质铸件","originalKeyword":"优质铸件"},{"id":"4db5f9e4-99e9-475f-80b8-0b9a39d58c76","keyword":"工艺","originalKeyword":"工艺"}],"language":"zh","publisherId":"clgc200101014","title":"高强度ZL205A铝合金飞机挂架铸造工艺","volume":"1","year":"2001"},{"abstractinfo":"研究了薄木化学镀铜的生产工艺及所得镀层的电磁屏蔽、装饰性、成本等方面的性能.给出了镀铜液配方及工艺参数.结果表明,单位面积上,化学镀铜的成本远小于铜箔<span style=\"color:red\">贴面</span>的成本,可节约成本达70%左右.镀铜层均匀连续,具有一定的装饰性.施镀时间在10～15 min之间时,镀铜层的电磁屏蔽效能可达25～40 dB,方块电阻达到0.07Ω/square左右.","authors":[{"authorName":"商俊博","id":"0bb9c28d-ff93-4857-8db3-9471cbd51d3d","originalAuthorName":"商俊博"},{"authorName":"赵广杰","id":"5b47d63e-28f4-4689-acec-d0bce8970d6e","originalAuthorName":"赵广杰"},{"authorName":"王克男","id":"db3803e2-f556-4144-aa12-3d4a619fecc4","originalAuthorName":"王克男"},{"authorName":"李为义","id":"a3d57627-b141-475f-8d0a-c84e9ce0ff15","originalAuthorName":"李为义"}],"doi":"","fpage":"21","id":"82a46891-2f34-4ae9-b76e-2b2e39bc8ee9","issue":"1","journal":{"abbrevTitle":"DDYTS","coverImgSrc":"journal/img/cover/DDYTS.jpg","id":"21","issnPpub":"1004-227X","publisherId":"DDYTS","title":"电镀与涂饰   "},"keywords":[{"id":"8d39339d-b1ae-4b8e-803d-7457436ff241","keyword":"木材","originalKeyword":"木材"},{"id":"35dc3d63-b0e1-4b92-82d8-2f54b1c9b259","keyword":"化学镀铜","originalKeyword":"化学镀铜"},{"id":"a3bd01d5-2ece-45ac-b166-dc190727147d","keyword":"电磁屏蔽","originalKeyword":"电磁屏蔽"},{"id":"3c1dc55c-9e8e-4012-a7d2-1db87ce79237","keyword":"装饰性","originalKeyword":"装饰性"},{"id":"e906df1b-6230-4a94-b9b7-5eda07031616","keyword":"方块电阻","originalKeyword":"方块电阻"}],"language":"zh","publisherId":"ddyts200901007","title":"新型功能性木质电磁屏蔽材料","volume":"28","year":"2009"},{"abstractinfo":"在实验室条件下,对水性封闭底漆在木家具板件上的水分挥发规律进行了研究.结果表明:涂层内的水分一部分渗透到木材中,一部分向空气中挥发,水分挥发率随干燥时间的延长逐渐增多,水分挥发速度随f燥时间的延长逐渐降低.枫木<span style=\"color:red\">贴面</span>装饰板涂层的水分挥发率为49.24%,水分残留量为50.76%,涂饰前后装饰板宽度的相对变化量为0.115 9%.","authors":[{"authorName":"路则光","id":"d633d92a-5c17-49f1-95a2-9ee4634e0b05","originalAuthorName":"路则光"},{"authorName":"贾万达","id":"66e3e2ca-3aad-40b3-853b-b34de282eeee","originalAuthorName":"贾万达"},{"authorName":"杨启勇","id":"961679f2-bb20-4e07-9f64-1b4e137c2dde","originalAuthorName":"杨启勇"},{"authorName":"张玉稳","id":"2ea65004-160d-40e0-b7dc-d5e8cb4645ed","originalAuthorName":"张玉稳"},{"authorName":"张帅","id":"d264a8a2-7a1c-404b-90d1-359cdf6542f5","originalAuthorName":"张帅"}],"doi":"10.3969/j.issn.0253-4312.2010.05.010","fpage":"34","id":"e0093410-25b6-4952-b590-13baa7cfbb3d","issue":"5","journal":{"abbrevTitle":"TLGY","coverImgSrc":"journal/img/cover/TLGY.jpg","id":"61","issnPpub":"0253-4312","publisherId":"TLGY","title":"涂料工业   "},"keywords":[{"id":"58e8261b-de66-4852-95d9-4cc3378a1ac3","keyword":"水性封闭底漆","originalKeyword":"水性封闭底漆"},{"id":"fee316d2-07d8-46ce-9eed-6ea5d8e0e7ef","keyword":"水分挥发","originalKeyword":"水分挥发"},{"id":"b17c1750-e83e-4558-9e10-2a808d650332","keyword":"木家具板件","originalKeyword":"木家具板件"}],"language":"zh","publisherId":"tlgy201005010","title":"水性封闭底漆在木家具板件上的水分挥发规律研究","volume":"40","year":"2010"},{"abstractinfo":"以K2O-MgO-Al2O3-SiO2-F系统的微晶玻璃为基础,与不同量的Y-TZP粉体进行复合,制备出了用于牙科修复的新型全瓷材料.借助于DTA、XRD、SEM等研究了该材料的主晶相种类和显微结构,并测试了复合材料的抗折强度、体积密度、维氏硬度、热膨胀系数和耐酸(碱)性等理化性能.实验结果表明:复合材料的主晶相为氟金云母、t-ZrO2和少量的m-ZrO2;其具有优于天然牙齿和牙釉质的力学性能,化学性能稳定、审美效果良好,适用于制作前牙冠、<span style=\"color:red\">贴面</span>、嵌体等口腔修复体.","authors":[{"authorName":"夏傲","id":"86d65058-7273-4ec2-b684-9e7bebf0360e","originalAuthorName":"夏傲"},{"authorName":"苗鸿雁","id":"016d16b4-f9b8-4fe5-aeac-13e19c32576e","originalAuthorName":"苗鸿雁"},{"authorName":"谈国强","id":"0a444926-c691-4343-9568-580221d120e3","originalAuthorName":"谈国强"}],"doi":"","fpage":"395","id":"307cda81-8424-4cd5-96e6-a7ee707ce03d","issue":"z2","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"2dcd6a10-81be-46e0-ab62-18630123c371","keyword":"云母微晶玻璃","originalKeyword":"云母微晶玻璃"},{"id":"694854da-d065-4234-b571-ed2d9073b873","keyword":"氧化锆","originalKeyword":"氧化锆"},{"id":"7232ce9f-32f4-41b7-9dc9-36a7964edcf3","keyword":"牙科材料","originalKeyword":"牙科材料"}],"language":"zh","publisherId":"cldb2005z2124","title":"牙科用氧化锆增韧云母微晶玻璃复合材料的研制","volume":"19","year":"2005"}],"totalpage":2,"totalrecord":11}