以PPE/PA6共混物为基体，进行性能与结构的表征，对比了不同PPE/PA6比例的共混物性能以及添加增容改性树脂、增韧剂的使用效果。结果表明，增容改性树脂可使得PPE树脂粒子变得均匀，在提高共混材料的韧性的同时，改善了材料的拉伸性能；而弹性体虽可以提高PPE与PA6的共混物的冲击性能，但拉伸性能下降；添加5%增容改性树脂有助于改善玻纤增强PPE/PA6材料的力学性能。
The structure and properties of PPE/PA6 blends were studied. The different proportion of PPE/PA6 blends were compared with the compatible modified resin and the elastomer. The results indicated that the compatible modified resin can make the PPE resin particles evenly and improve the toughness and rigidity of the PPE/PA6 blends. The elastomer can improve the impact strength of PPE/PA6 blends,but reduce the tensile property. The 5%compatible modified resin addition was helpful to improve the performance of the glass fiber reinforced PPE/PA6 blends.
参考文献
| [1] | 王洪澎,张权,李洋.新型增容剂（A）对聚苯醚/聚酰胺共混体系的影响[J].高分子材料科学与工程,1992(02):108-112. |
| [2] | 孙皓,丁胜飞,朱新宇.PPO/PA合金的研制[J].塑料工业,2003(09):13-14,34. |
| [3] | 杨春兵;何杰;王夕聚 等.聚苯醚/聚酰胺合金的研究[J].工程塑料应用,1996,6(24):8-10. |
| [4] | 袁文,李健,隋轶巍.PPE黏度对MPPE性能的影响[J].塑料工业,2009(11):48-50. |
| [5] | 吕通建,王江淮,惠翠,王颖,张健.PA6/PPO合金的研究[J].工程塑料应用,2009(11):19-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%