欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 钢铁研究学报
  4. 钢铁材料的表面纳米化

钢铁研究学报, 2011, 23(8): 1-30.

钢铁材料的表面纳米化

刘刚 1, , 莫成刚 2, , 武保林 3, , 左良 4,

1.东北大学研究院,辽宁沈阳110004

2.东北大学研究院,辽宁沈阳110004

3.沈阳航空航天大学材料工程系,辽宁沈阳110136

4.东北大学研究院,辽宁沈阳110004

基金项目:   国家自然科学基金资助项目(50071061)  

关键词： 钢铁 , 表面纳米化 , 研究进展

Surface Nano-Crystallization of Ferrous Material

Keywords： ferrous material , surface nanocrystallization , research progress

表面纳米化技术能通过往复加载使钢铁材料表面发生强烈塑性变形而实现纳米化,在表面形成纳米-微米梯度结构。这种独特的结构既能为研究形变诱发的纳米化机理和宽尺寸范围内结构与性能关系提供理想样品,又能显著地提高钢铁材料整体的综合性能和服役行为,因此可望在工业上取得实用。表面纳米化因丰富的学术和应用价值得到国内外广泛关注,并已成为纳米材料研究的一个重要方向,因此从制备、结构、性能和化学处理等方面介绍表面纳米化研究工作已取得的进展。

Surface nanocrystallization（SNC） was a new surface treatment technique for metals,which can provide repeated loads acting on the metal surface,and a gradient nano-micro-structured surface layer can be synthesized on ferrous material through intense plastic deformations.This unique gradient structure can not only be used to study deformation-induced grain refinement mechanisms and structure-property relationships within a wide-range（from nano-to micro-meters）,but also significantly enhance over-all properties and behaviors of ferrous material,therefore it was expected to achieve practice application.Recently,more and more investigations were focused on the SNC due to its scientific and technological interests,and the SNC become a new branch for the development of the nano-materials.Investigation results on the SNC technique,including synthesizing methods,structure,property and chemical treatment,were presented.

参考文献

[1] LU K;LU J .Surface Nanocrystallization(SNC)of Metallic Materials-Presentation of the Concept Behind a New Approach[J].Journal of Materials Science and Technology,1999,15(03):193.
[2] LU K;LUJ .Nanostructured Surface Layer on Metallic Materials Induced by Surface Mechanical Attrition Treatment[J].Materials Science and Engineering,2004,375/377A:38.
[3] 徐滨士.纳米表面工程[M].北京:化学工业出版社,2004
[4] LIU G;WANG S C;LOU X F et al.Low Carbon Steel With Nanostructured Surface Layer Induced by High-Energy Shot Peening[J].Seripta Materialia,2001,44(8/9):1791.
[5] Lu K;Lu J;Tao NR;Sui ML .Surface nanocrystallization of iron induced by ultrasonic shot peening[J].Nanostructured Materials,1999(4):433-440.
[6] LIU G;LU J;LU K .Surface Nanocrystalization of 316L Stainless Steel Induced by Ultrasonic Shot Peening[J].Materials Science and Engineering,2000,286A:91.
[7] Minoru Umemoto;Yoshikazu Todaka;Koichi Tsuchiya .Formation of Nanocrystalline Structure in Steels by Air Blast Shot Peening[J].Materials transactions,2003(7):1488-1493.
[8] 熊天英,刘志文,李智超,吴杰,金花子,李铁藩.超音速微粒轰击金属表面纳米化新技术[J].材料导报,2003(03):69-71.
[9] FAN X M;ZHOU B S;ZHU L et al.Surface Nanocrystallization of Low Carbon Steel Induced by Circulation Rolling Plastic Deformation[J].Materials Science Forum,2005,475/479:133.
[10] Mordyuk B N;Prokopenko G I;Fatigue L .ife Improvement of a-Titanium by Novel Ultrasonieally Assisted Technique[J].Materials Science and Engineering,2006,437A:396.
[11] WANG T;WANG D P;LIU G et al.Investigations on the Nanoerystallization of 40Cr Using Ultrasonie Surface Rolling Proeessing[J].Appl Surf Sei,2008,255:1824.
[12] Sato M;Tsuji N;Minamino Y et al.Formation of Nanocrystalline Surface Layers in Various Metallic Materials by Near Surface Severe Plastic Deformation[J].Science and Technology of Advanced Materials,2004,5(01):145.
[13] LI J G;Umemoto M;Todaka Y et al.Nanocrystalline Structure Formation in Carbon Steel Introduced by High Speed Drilling[J].Materials Science and Engineering,2006,435/436A:383.
[14] W.L. Li;N.R. Tao;K. Lu .Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment[J].Scripta materialia,2008(5):546-549.
[15] Xingping YONG,Gang LIU,Ke LU,Jian LU.Characterization and Properties of Nanostructured Surface Layer in a Low Carbon Steel Subjected to Surface Mechanical Attrition[J].材料科学技术学报(英文版),2003(01):1-4.
[16] K. Dai;L. Shaw .Comparison between shot peening and surface nanocrystallization and hardening processes[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):46-53.
[17] 吕晓仁,李曙,刘阳.不同含碳量Fe-C合金表面纳米化行为的分析[J].中国表面工程,2007(03):14-17.
[18] 刘阳,吕晓仁,张荣禄,李曙.超音速微粒轰击表面纳米化及其对耐磨性的影响[J].中国表面工程,2006(06):20-24.
[19] DAI K;Villegas J;Stone Z et al.Finite Element Modeling of the Surface Roughness of 5052 A1 Alloy Subjected to a Severe Plastic Deformation Process[J].Acta Materialia,2004,52:5771.
[20] 杨磊,赵秀娟,陈春焕,陈婷婷,徐祥来,任瑞铭.纯钛高能喷丸表面纳米化后粗糙度的分析[J].中国表面工程,2006(04):43-46.
[21] N. R. Tao;Z. B. Wang;W. P. Tong;M. L. Sui;J. Lu;K. Lu .An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment[J].Acta materialia,2002(18):4603-4616.
[22] 吕爱强,刘刚,刘春明.机械研磨诱导316L不锈钢表层组织的演变[J].金属学报,2004(09):943-947.
[23] H. W. Zhang;Z. K. Hei;G. Liu;J. Lu;K. Lu .Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment[J].Acta materialia,2003(7):1871-1881.
[24] 李四军,刘刚,周蕾,王福,左良.表面机械研磨处理的IF钢结构、织构与力学性能的变化[J].金属学报,2007(07):744-748.
[25] ZHOU L;LIU G;MA X L et al.Strain--Induced Refinement in a Steel With Spheroidal Cementite Subjected to Surface Mechanical Attrition Treatment[J].Acta Materialia,2008,56:78.
[26] Wen M;Gu JF;Liu G;Wang ZB;Lu J .Nanocrystalline titanium to mesoporous anatase with high bioactivity[J].Crystal growth & design,2007(12):2400-2403.
[27] Wen, M;Gu, JF;Liu, G;Wang, ZB;Lu, J .Surface evolution of a gradient structured Ti in hydrogen peroxide solution[J].Applied Surface Science,2008(9):2905-2910.
[28] Roland T;Retraint D;Lu K;Lu J .Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment[J].Scripta materialia,2006(11):1949-1954.
[29] 吕爱强;刘春明;刘刚 .316L不锈钢表面机械研磨诱导表层纳米化[J].东北大学学报(自然科学版),2004,25(09):848.
[30] Ba DM;Ma SN;Meng FJ;Li CQ .Friction and wear behaviors of nanocrystalline surface layer of chrome-silicon alloy steel[J].Surface & Coatings Technology,2007(2):254-260.
[31] 张俊宝,刘志文,宋洪伟,吴杰,史弼,熊天英.高能机械加工表面纳米化40Cr钢组织结构与力学性能[J].航空材料学报,2004(06):11-15.
[32] LI D;CHEN H N;XUA H .The Effect of Nanostructured Surface Layer on the Fatigue Behaviors o( a Carbon Steel[J].Appl Surf Sei,2009,255:3811.
[33] 张洪旺,刘刚,黑祖昆,吕坚,卢柯.表面机械研磨诱导AISI 304不锈钢表层纳米化Ⅰ.组织与性能[J].金属学报,2003(04):342-346.
[34] CHEN X H;LU J;LU L et al.Tensile Properties of a Nanocrystalling 316L Austenitic Stainless Steel[J].Scripta Materialia,2005,52:1039.
[35] Roland T;Retraint D;Lu K et al.Enhanced Mechanical Behavior of a Nanocryatallised Stainless Steel and Its Thermal Stability[J].Materials Science and Engineering,2007,445/446A:281.
[36] Wang ZB.;Tao NR.;Li S.;Wang W.;Liu G.;Luc J.;Lu K. .Effect of surface nanocrystallization on friction and wear properties in low carbon steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):144-149.
[37] ZHOU L;LIU G;HAN Z et al.Grain Size Effect on Wear Resistance of a Nanostructured AISI52100 Steel[J].Scripta Materialia,2008,58:445.
[38] 韩同伟,钟蜀晖.表面纳米化对316L不锈钢低周疲劳性能的影响[J].力学季刊,2007(01):41-45.
[39] 李东,陈怀宁,刘刚,卢柯.SS400钢焊接接头表层组织纳米均一化及硬度均一化处理[J].金属学报,2001(09):980-984.
[40] 李东,陈怀宁,刘刚,卢柯,林泉洪.SS400钢对接接头表面纳米化及其对疲劳强度的影响[J].焊接学报,2002(02):18-21.
[41] 李瑛,王福会,刘刚.表面纳米化低碳钢电化学行为尺寸效应[J].中国腐蚀与防护学报,2001(04):215-219.
[42] Y. Li;F. Wang;G. Liu .Grain Size Effect on the Electrochemical Corrosion Behavior of Surface Nanocrystallized Low-Carbon Steel[J].Corrosion: The Journal of Science and Engineering,2004(10):891-896.
[43] 吕爱强,张洋,刘春明,刘刚.表面纳米化316L不锈钢在酸性介质中腐蚀性能的研究[J].材料与冶金学报,2004(02):129-132.
[44] A.Q. Lu;Y. Zhang;Y. Li .Effect of Nanocrystalline and Twin Boundaries on Corrosion Behavior of 316L Stainless Steel Using SMAT[J].Acta metallurgica Sinica,2006(3):183-189.
[45] 王天生,于金库,董冰峰,张福成.1Cr18Ni9Ti不锈钢的喷丸表面纳米化及其对耐蚀性的影响[J].机械工程学报,2005(09):51-54.
[46] Wang TS;Yu JK;Dong BF .Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel[J].Surface & Coatings Technology,2006(16/17):4777-4781.
[47] Mordyuka B N;Prokopenko G I;Vasylyev M A et al.Effect of Structure Evolution Induced by Ultrasonic Peening on the Corrosion Behavior of AISI-321 Stainless Steel[J].Mater Scl Eng,2007,458A:253.
[48] 王吉孝,王志平,霍树斌,王佳杰,熊天英.16MnR钢焊接接头表面纳米化及接头抗H2S应力腐蚀性能[J].焊接,2005(02):13-16.
[49] 王志平,王吉孝,纪朝辉,李娜.表面纳米化0Cr18Ni9Ti焊接接头抗应力腐蚀性能[J].焊接学报,2007(01):5-8.
[50] 石继红,武保林,刘刚.316L不锈钢表面纳米化后腐蚀性能研究[J].材料工程,2005(10):42-46.
[51] TONG W P;TAO N R;WANG Z B et al.Nitriding Iron at Lower Temperatures[J].Science,2003,289:686.
[52] TONG W P;TAO N R;WANG Z B et al.The Formation of ε-Fe3-2N Phase in a Nanoerystalline Fe[J].Scripta Materialia,2004,50:647.
[53] Z.B. Wang;J. Lu;K. Lu .Chromizing behaviors of a low carbon steel processed by means of surface mechanical attrition treatment[J].Acta materialia,2005(7):2081-2089.
[54] WANG Z B;TAO N R;TONG W P et al.Defusion of Chromium in Nanocrystalline Iron Produced by Means of Surface Mechanical Attrition Treatment[J].Acta Materialia,2003,51:4319.
[55] TONG W P;HE C S;HE J C et al.Strongly Enhanced Intruding Kinetics by Means of Grain Refinement[J].Applied Physics Letters,2006,89:2019.
[56] GU J F;BEI D H;PAN J S et al.Improved Nitrogen Transport in Surface Nanocrystallized Low-Carbon Steels During Gaseous Nitridation[J].Materials Letters,2002,55:340.
[57] 卑多慧,吕坚,顾剑锋,卢柯,潘健生.表面纳米化预处理对低碳钢气体渗氮行为的影响[J].材料热处理学报,2002(01):19-24.
[58] LIN Y M;LU J;WANG L P et al.Surface Nanocrystallization by Surface Mechanical Attrition Treatment and Its Effect on Structure and Properties of Plasma Nitrided AISI 321 Stainless Steel[J].Acta Materialia,2006,54:5599.
[59] ZHANG H W;WANG L;HEI Z K et al.Low-Temperature Plasma Nitriding of AISI 304 Stainless Steel With Nanostructured Sudaee Layer[J].Z MetaUka,2003,94(10):1143.
[60] Wang ZB;Lu J;Lu K .Wear and corrosion properties of a low carbon steel processed by means of SMAT followed by lower temperature chromizing treatment[J].Surface & Coatings Technology,2006(6):2796-2801.
[61] TONG W P;LIU C Z;WANG W et al.Gaseous Nitriding of Iron With a Nanostruetured Surface Layer[J].Scripta Materialia,2007,57:533.
[62] Tong WP;Han Z;Wang LM;Lu J;Lu K .Low-temperature nitriding of 38CrMoAl steel with a nanostructured surface layer induced by surface mechanical attrition treatment[J].Surface & Coatings Technology,2008(20):4957-4963.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net