轻压下技术作为改善铸坯偏析的有效措施之一,被广泛应用于高碳钢方坯连铸中,其压下参数的选取对于轻压下技术至关重要.通过理论分析并结合其他厂的生产经验,认为压下位置在中心固相率为0.2～0.8、总压下量为4～8 mm时,轻压下效果最佳.合理地应用轻压下技术,可以有效地减轻铸坯的V型偏析、降低中心碳偏析并改善铸坯的宏观组织.
参考文献
| [1] | 武建民.方坯连铸机浇铸高碳钢[J].南方金属,2003(02):4-8. |
| [2] | 薛正良,李正邦,张家雯.高碳钢连铸方坯中心偏析[J].炼钢,2000(01):56-59. |
| [3] | 倪满森.连铸坯的中心偏析问题[J].连铸,2001(06):24-26,44. |
| [4] | 张克强,齐振亚,王长栓,王坚,抗小敏.高碳钢方坯连铸中心缩孔去除[J].钢铁,2004(01):27-29,20. |
| [5] | 朱苗勇,林启勇.连铸坯的轻压下技术[J].鞍钢技术,2004(01):1-6. |
| [6] | 程常桂;茅洪祥.轻压下技术在连铸中的应用[J].河南冶金,1999(01):25-28. |
| [7] | Flemings M.C.; .Our Understanding of Macrosegregation: Past and Present[J].ISIJ International,2000(9):833-841. |
| [8] | Tadayoshi Takahashi;Ken-ichi Ohsasa;Noriyuki Katayama .Simulation for Process of Solid-Liquid Coexisting Zone in Continuous Casting of Carbon Steels[J].Testsu to Hagane,1990,76(05):728-734. |
| [9] | 林启勇,蒋欢杰,朱苗勇.连铸坯动态轻压下的压下参数分析[J].材料与冶金学报,2004(04):261-265. |
| [10] | Sakaki G S;Kwong A T;Petozzi J J.Soft Reduction of Continuously-Cast Blooms at Stelco's Hilton Works[A].,1995:295-300. |
| [11] | Masafumi ZEZE;Hideyuki MISUMI;Shuji NAGATA .Segregation Behavior and Deformation Behavior during Soft-reduction of Unsolidified Steel Ingot[J].鉄と鋼,2001(2):71-76. |
| [12] | Chang-Hee Yim;Joong-Kil Park;Kyung-Sik Oh.The Control of Internal Quality by the Reduction of Blooms with Liquid Core[A].,1998:302-313. |
| [13] | Chen Yeongkuen;Feng Fu-An;Lin Kuanju.Improvement of Center Segregation for High Carbon Steel Bloom[A].,1996:505-512. |
| [14] | 杨素波,陈永,李桂军.大方坯连铸动态轻压下技术应用研究[J].钢铁,2005(06):24-26. |
| [15] | 王光进,洪军,郭忠波.静态轻压下技术在高碳连铸方坯生产中的应用[J].河南冶金,2006(z2):18-21. |
| [16] | Suzuki M;Kimura K;Kawami A.Improvement in Center Segregation of High Carbon Steel Continuous Casting Blooms[A].,1989:115-123. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%