欢迎登录材料期刊网

材料期刊网

高级检索

通过实验室热轧机研究了热机械控制工艺(TMCP)对热轧TRIP钢力学性能的影响.结果表明:在热轧变形过程中应变诱导铁素体相变,低温大变形量造成铁素体晶粒细化.随终轧温度的降低和终轧变形量的增加,残余奥氏体的稳定性增加,相变诱发塑性(TRIP)效果更好.在700 ℃终轧且终轧变形量为50%时,抗拉强度、屈服强度和总伸长率分别达到791 MPa,538 MPa和36%的最大值.

参考文献

[1] N. R. BANDYOPADHYAY;S. DATTA .Effect of Manganese Partitioning on Transformation Induced Plasticity Characteristics in Microalloyed Dual Phase Steels[J].ISIJ International,2004(5):927-934.
[2] Timokhina I B;Hodgson P D;Pereloma E V et al.Effect of Deformation Schedule on the Microstructure and Mechanical Properties of a Thermomechanically Processed C-Mn-Si Transformation-lnduced Plasticity Steel[J].METALLURGICAL AND MATERIALS TRANSACTIONS A:PHYSICA,2003,34A:1599-1609.
[3] E. V. Pereloma;I. B. Timokhina;P. D. Hodgson .Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(0):448-452.
[4] Weng Y Q;Sun X J;Dong H et al.Overview on the Theory of Deformation Induced Ferrite Transformation[J].Iron and Steel,2005,40(zk):9-15.
[5] Haiwen LUO;Lie ZHAO;Suzelotte O. KRUIJVER .Effect of Intercritical Deformation on Bainite Formation in Al-containing TRIP Steel[J].ISIJ International,2003(8):1219-1227.
[6] Arif Basuki;Etienne Aernoudt .Influence of rolling of TRIP steel in the intercritical region on the stability of retained austenite[J].Journal of Materials Processing Technology,1999(0):37-43.
[7] Godet Stephane;Harlet Philippe;Delannay Francis .Effect of hot-rolling conditions on the tensile properties of multi phase steels exhibiting a TRIP effect[J].Steel Research,2002(6/7):280-286.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%