综述了双辊薄钢带连铸过程中薄带-铸辊界面热流特征的研究进展.重点阐述了薄带-铸辊界面热流特征的研究方法及其所取得的成果,总结了界面平均热流系数的取值,并分析了界面热流与薄带凝固组织的关系.
参考文献
[1] | Hiroyuki YASUNAKA;Kazuyuki TANIGUCHI;Masahiko KOKITA .Surface Quality of Stainless Steel Type 304 Cast by Twin-roll Type Strip Caster[J].ISIJ International,1995(6):784-789. |
[2] | Campbell P;Blejde W;Mahapatra R et al.Recent progress on commercialization of CASTRIP direct strip casting technology at Nucor Crawfordsville[J].Metallurgist,2004,9-10:507. |
[3] | J.E. Spinelli;J.P. Tosetti;C.A. Santos .Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel[J].Journal of Materials Processing Technology,2004(3):255-262. |
[4] | 丁培道,蒋斌,杨春楣,方亮.薄带连铸技术的发展现状与思考[J].中国有色金属学报,2004(z1):192-196. |
[5] | 苗雨川,邸洪双,张晓明,王国栋,刘相华.双辊铸轧不锈钢薄带的三维有限元数值模拟[J].金属学报,2000(10):1109-1112. |
[6] | 杨明波,梁小平,潘复生,丁培道.双辊薄带-铸辊界面平均换热系数的测定[J].铸造,2002(12):772-774. |
[7] | 方园;樊俊飞;于艳 等.双辊薄带连铸过程数学模拟及水模试验研究[D].上海:上海宝钢研究院,2003. |
[8] | Park CM.;Kim WS.;Park GJ. .Thermal analysis of the roll in the strip casting process[J].Mechanics research communications,2003(4):297-310. |
[9] | Tavares R P;Isac M;Hamel F G et al.Instantaneous interfacial heat fluxes during the 4 to 8 m/min casting of carbon steels in a twin-roll caster[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,2001,32B:55. |
[10] | Guthrie R.I.L.;Isac M. .Measurements, Simulations, and Analyses of Instantaneous Heat Fluxes from Solidifying Steels to the Surfaces of Twin Roll Casters and of Aluminum to Plasma-Coated Metal Substrates[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(5):1031-1047. |
[11] | Blejde W;Fukase H;Mahapatra R.Recent developments in Project M-the joint development of low carbon steel strip casting by BHP and IHI[A].Germany:METEC Congress,1999:176. |
[12] | W.Blejde;R.Mahapatra;H.Fukase .Application of Fundamental Research at Project 'M'[J].Iron & Steelmaker,2001(2):43-48. |
[13] | L.Strezov .Experimental Studies of Interfacial Heat Transfer and Initial Solidification Pertinent to Strip Casting[J].ISIJ International,1998(9):959-966. |
[14] | Strezov L.;Herbertson J. .Mechanisms of Initial Melt/Substrate Heat Transfer Pertinent to Strip Casting[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(5):1023-1030. |
[15] | 杨明波,梁小平,潘复生,丁培道.双辊薄带-铸辊界面平均换热系数的测定[J].铸造,2002(12):772-774. |
[16] | Spinelli J E;Tosetti J P;Santos C A et al.Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel[J].Journal of Materials Processing Technology,2004,150:255. |
[17] | 苗雨川,邸洪双,张晓明,鲍培玮,王国栋,刘相华.双辊薄带下不锈钢铸轧过程的耦合数值模拟[J].东北大学学报(自然科学版),2000(05):551-553. |
[18] | J. D. HWANG;H. J. LIN;W. S. HWANG .Numerical Simulation of Metal Flow and Heat Transfer during Twin Roll Strip Casting[J].ISIJ International,1995(2):170-177. |
[19] | Loser W;Thiem S;Jurisch M .Solidification modeling of microstructures in near-net-shape casting of steels[J].Materials Science and Engineering A,1993,A173:323. |
[20] | Tavares R P;Guthrie R I L .Computational fluid dynamics applied to twin-roll casting[J].Canadian Metallurgical Quarterly,1998,37(3-4):241. |
[21] | Santos C A;Spim JR J A;Garcis A .Modelling of solidification in twin-roll strip casting[J].Journal of Materials Processing Technology,2000,102:33. |
[22] | Thiem S;Loser W;Jurisch M .Solidification modeling of microstructure in twin-roller thin strip casting of stainless steel[J].Proc Metall,1993,64(06):307. |
[23] | Gupta M;Sahai Y .Mathematical modeling of fluid flow,heat transfer,and solidification in two-roll melt drag thin casting of steel[J].ISIJ International,2000,40(02):144. |
[24] | 王成全 .不锈钢亚快速凝固组织转变及控制研究[D].大连理工大学,2005. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%