金属复合板在制造过程中,表面处理对界面的结合最为关键,良好的表面结合状态是达到高强度结合界面的一个重要前提.对复合板的表面处理技术进行了简单概括,并对比了机械处理法、化学处理法及其它处理法的优缺点和使用条件.最后指出,机械处理结合化学脱脂的表面处理方法有利于提高金属复合板的结合质量和生产效率.
参考文献
| [1] | Long Li;Fuxing Yin;Kotobu Nagai .Progress of Laminated Materials and Clad Steels Production[J].Materials Science Forum,2011(Pt.1):439-447. |
| [2] | 杨栋,刘波.复合板轧制界面处理方法综述[J].甘肃冶金,2010(02):20-23. |
| [3] | 耿林,倪丁瑞,郑镇洙.原位自生非连续增强钛基复合材料的研究现状与展望[J].复合材料学报,2006(01):1-11. |
| [4] | H. Danesh Manesh .Assessment of surface bonding strength in Al clad steel strip using electrical resistivity and peeling tests[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2006(6):634-640. |
| [5] | W. ZHANG;N. BAY .Cold Welding — Experimental Investigation of the Surface Preparation Methods[J].Welding Journal,1997(8):326s-330s. |
| [6] | 谢广明,骆宗安,王光磊,王国栋.真空轧制不锈钢复合板的组织和性能[J].东北大学学报：自然科学版,2011(10):1398-1401. |
| [7] | 王金忠,孙建亮,徐在忠,刘云启.Q6945钢板抛丸除锈清理设备的开发与研制[J].铸造设备研究,2001(06):7-10. |
| [8] | 李钦奉,王贵成.喷嘴直径对喷砂清理效率的影响[J].材料保护,2001(12):51-52. |
| [9] | 李钦奉.喷砂技术及其表面清理效率的研究[J].中国修船,2000(03):13. |
| [10] | 姜国圣,王志法,何平,王海山.表面处理方式对铜/钼/铜复合材料界面结合效果的影响[J].稀有金属,2005(01):6-10. |
| [11] | Hiroaki Matsumoto;Sadao Watanabe;Shuji Hanada .Fabrication of pure Al/Mg-Li alloy clad plate and Its mechanical properties[J].Journal of Materials Processing Technology,2005(1):9-15. |
| [12] | NISHIDA Shun-ichi;MATSUOKA Toshio;WADA Tsunemi .Technology and Products of JFE Steel's Three Plate Mills[J].JFE technical report,2005(5):1-9. |
| [13] | H. Danesh Manesh;A. Karimi Taheri .Bond strength and formability of an aluminum-clad steel sheet[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):138-143. |
| [14] | S. Ohsaki;S. Kato;N. Tsuji .Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process[J].Acta materialia,2007(8):2885-2895. |
| [15] | Sauvage X;Dinda GP;Wilde G .Non-equilibrium intermixing and phase transformation in severely deformed Al/Ni multilayers[J].Scripta materialia,2007(3):181-184. |
| [16] | Tsuji N.;Toyoda T.;Minamino Y.;Koizumi Y.;Yamane T.;Komatsu M. Kiritani M. .Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):108-116. |
| [17] | Rengang Zhang;Viola L. Acoff .Processing sheet materials by accumulative roll bonding and reaction annealing from Ti/Al/Nb elemental foils[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):67-73. |
| [18] | YAN Hong-zhi.Key factors for warm rolled bond of 6111-aluminium strip[J].中国有色金属学会会刊（英文版）,2006(01):84-90. |
| [19] | 何美凤,符定梅,韩静涛,刘靖.含有助复剂扩散-轧制复合钢板的研究[J].材料开发与应用,2005(04):15-17,26. |
| [20] | 王强,许树勤,董贤帮.表面机械处理及扩散退火对复合板性能的影响[J].金属热处理,2011(01):57-59. |
| [21] | 董贤帮,庞玉华,张静.界面处理方法对不锈钢/铝多层复合板结合强度的影响[J].轻合金加工技术,2009(03):33-35,43. |
| [22] | 王小红,唐获,许荣昌,温永红.铝-铜轧制复合工艺及界面结合机理[J].有色金属,2007(01):21-24. |
| [23] | 迟彩芬.激光表面处理技术的现状及其工业应用[J].中国科技信息,2005(24):129. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%