欢迎登录材料期刊网

材料期刊网

高级检索

在高温钼丝炉内对实验钢采用Ti-Mg单独及复合脱氧处理,利用带有能谱仪的扫描电镜和光学显微镜研究脱氧产物的成分、大小分布及铸态微观组织的变化,分析夹杂物对晶内铁素体形核以及实验钢奥氏体晶粒大小的影响.结果表明,Ti-Mg复合脱氧后的产物可以作为TiN和MnS的析出核心,形成复合夹杂物;复合夹杂物在冷却过程中可以有效的促进晶内铁素体形核,同时抑制加热过程中奥氏体晶粒的粗化.

参考文献

[1] Takamura J;Mizoguchi S.Roles of oxides in steel performance[A].Nagoya,Japan,1990:591-597.
[2] S.S. BABU;S.A. DAVID .Inclusion Formation and Microstructure Evolution in Low Alloy Steel Welds[J].ISIJ International,2002(12):1344-1353.
[3] Ogibayashi S.The features of oxides in Ti-deoxidized steel[A].Nagoya,Japan,1990:612-617.
[4] T. FURUHARA;T. SHINYOSHI;G. MIYAMOTO .Multiphase Crystallography in the Nucleation of Intragranular Ferrite on MnS + V(C, N) Complex Precipitate in Austenite[J].ISIJ International,2003(12):2028-2037.
[5] 刘中柱,桑原守.氧化物冶金技术的最新进展及其实践[J].炼钢,2007(03):7-13.
[6] 刘中柱,桑原守.氧化物冶金技术的最新进展及其实践[J].炼钢,2007(04):1-6.
[7] K.M. Wu .Three-Dimensional Analysis of Acicular Ferrite in a Low-Carbon Steel Containing Titanium[J].Scripta materialia,2006(4):569-574.
[8] Adrian H;picketing F B .Effect of Ti additions on austenite grain growth kinetics of medium carbon V-Nb steels containing 0.008 ~ 0.018% N[J].Materials Science and Technology,1991,7(02):176-182.
[9] Muxing GUO;Hideaki SUITO .Dispersion of Primary Inclusions of Ce_2O_3 and CeS in Fe-0.20 mass C-0.02 mass/100 P Alloy[J].ISIJ International,1999(7):678-686.
[10] Yamamoto K.;Hasegawa T. .Effect of Boron on Intra-granular Ferrite Formation in Ti-Oxide Bearing Steels[J].ISIJ International,1996(1):80-86.
[11] Kojma A;Hoshino M .Super high HAZ toughness technology with fine microstructure imparted by fine particles[J].NIPPON STEEL TECHNICAL REPORT,2004,380:2-5.
[12] 赵辉,胡水平,武会宾,李太全,安航航.Mg处理高钢级管线钢焊接热影响区晶内铁素体形核机制研究[J].钢铁,2010(02):82-85.
[13] Tae-Kyu LEE;H. J. KIM .Effect of Inclusion Size on the Nucleation of Acicular Ferrite in Welds[J].ISIJ International,2000(12):1260-1268.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%