欢迎登录材料期刊网

材料期刊网

高级检索

介绍了镁合金在单轴压缩、单轴拉伸、轧制和挤压条件下塑性变形的力学行为及微观组织结构演变规律.简述了镁合金中二次拉伸孪生现象以及各种变形条件下孪生与孪生变体类型的选择规律.基于对镁合金位错滑移、机械孪生及动态回复与再结晶行为的认识,对镁合金力学行为的各向异性、轧制与挤压成型能力的影响规律进行了探讨,强调了初始织构对变形机制、动态再结晶及成型能力的重要影响.最后讨论了析出强化镁合金塑性变形与强韧化机理.

参考文献

[1] Bain M Z;Shin K S.Twin Interactions in Magnesium Single Crystals[A].Weimar:Germany,2009:781-787.
[2] Jain J;Zou J;Sinclair C W.Double Tensile Twinning in a Mg-8Al-0.5Zn Alloy[J].Journal of Microscopy,2010
[3] Liu P.Observation of Double Tension Twins in AZ31 Mg Alloy[J].,2011
[4] Mark Denis Nave;Matthew Robert Barnett .Micro structures and textures of pure magnesium deformed in plane-strain compression[J].Scripta materialia,2004(9):881-885.
[5] Yoo M .Slip,Twinning,and Fracture in Hexagonal Close-Packed Metals[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1981,12:409-418.
[6] S. Godet;L. Jiang;A. A. Luo .Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes[J].Scripta materialia,2006(11):1055-1058.
[7] L. Jiang;J.J. Jonas;R.K. Mishra;A.A. Luo;A.K. Sachdev;S. Godet .Twinning and texture development in two Mg alloys subjected to loading along three different strain paths[J].Acta materialia,2007(11):3899-3910.
[8] Sung Hyuk Park;Seong-Gu Hong;Chong Soo Lee .Activation mode dependent {10—12} twinning characteristics in a polycrystalline magnesium alloy[J].Scripta materialia,2010(4):202-205.
[9] M.R. Barnett;Z. Keshavarz;A.G. Beer .Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy[J].Acta materialia,2008(1):5-15.
[10] E. Martin;L. Capolungo;L. Jiang .Variant selection during secondary twinning in Mg-3%Al[J].Acta materialia,2010(11):3970-3983.
[11] Jiang J;Godfrey A;Liu W et al.Identification and Analysis of Twinning Variants during Compression of a Mg-Al-Zn alloy[J].Scripta Materialia,2008,58:122-125.
[12] Wang B S.Strain Rate and Texture Effects on Microstractural Characteristics of AZ31 Mg Alloy during Compression[J].,2011
[13] Kelley E W;Hosford W F .Plane-Strain Compression of Magnesium and Magnesium Alloy Crystals[J].Transactions of the Metallurgical Society of AIME,1968,242:6-13.
[14] J. KOIKE .Enhanced Deformation Mechanisms by Anisotropic Plasticity in Polycrystalline Mg Alloys at Room Temperature[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(7):1689-1696.
[15] Barnett M R .Influence of Deformation Conditions and Texture on the High Temperature Flow Stress of Magnesium AZ31[J].Journal of Light Metals,2001,1:167-177.
[16] J. Jiang;A. Godfrey;Q. Liu .Influence of grain orientation on twinning during warm compression of wrought Mg-3Al-1Zn[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(12):1417-1422.
[17] R. Gehrmann;M.M. Frommert;G. Gottstein .Texture effects on plastic deformation of magnesium[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):338-349.
[18] Lan Jiang;John J. Jonas;Alan A. Luo .Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):302-309.
[19] Marko Knezevic;Amanda Levinson;Ryan Harris;Raja K. Mishra;Roger D. Doherty;Surya R. Kalidindi .Deformation twinning in AZ31: Influence on strain hardening and texture evolution[J].Acta materialia,2010(19):6230-6242.
[20] Wang B S.Effect of Crystal Orientation on the Mechanical Properties and Strain Hardening Behavior of Magnesium Alloy AZ31During Uniaxial Compression[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2011
[21] Agnew SR;Duygulu O .Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B[J].International Journal of Plasticity,2005(6):1161-1193.
[22] M.R. BARNETT;Z. KESHAVARZ;X. MA .A Semianalytical Sachs Model for the Flow Stress of a Magnesium Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(7):2283-2293.
[23] 刘培;信运昌;刘庆.Plastic anisotropy and fracture behavior of an AZ31 magnesium alloy[J].中国有色金属学报,2011
[24] Stohr J F;Poirier J P .Etude en Microscopie Electronique Du glissement Pyramidal {1122} 《1123》 dans le Magnesium[J].Philosophical Magazine,1972,25(06):1313-1329.
[25] A. Styczynski;Ch. Hartig;J. Bohlen;D. Letzig .Cold rolling textures in AZ31 wrought magnesium alloy[J].Scripta materialia,2004(7):943-947.
[26] Yoo M H .Non-Basal Slip Systems in HCP Metals and Alloys:Source Mechanisms[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,319-321:87-92.
[27] Wang, M.;Xin, R.;Wang, B.;Liu, Q. .Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(6):2941-2951.
[28] J.A. del Valle;O.A. Ruano .Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):473-480.
[29] Xin Y C;Wang M Y;Zeng Z.Tailoring the Texture of Magnesium Alloy by Twinning Deformation to Improve the Rolling Capability[J].Scripta Materialia,2011
[30] Y. Chino;J.-S. Lee;K. Sassa .Press formability of a rolled AZ31 Mg alloy sheet with controlled texture[J].Materials Letters,2006(2):173-176.
[31] Yasumasa Chino;Kensuke Sassa;Akira Kamiya;Mamoru Mabuchi .Enhancement of press formability of rolled Mg alloy sheet by using cross rolling processes[J].Materials Science Forum,2007(2):1615-1619.
[32] 陈兴品;尚都;肖睿 et al.Influence of Rolling Ways on Microstructure and Anisotropy of AZ31 Alloy Sheet[J].中国有色金属学报,2010,20:s589-s593.
[33] Li N L.Effect of Extrusion Ratio on Microstucture and Texture Evolution of AZ31 Mg alloy[J].,2011
[34] S.M. He;X.Q. Zeng;L.M. Peng .Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):316-323.
[35] T. Honma;T. Ohkubo;S. Kamado .Effect of Zn additions on the age-hardening of Mg-2.0Gd-l.2Y-0.2Zr alloys[J].Acta materialia,2007(12):4137-4150.
[36] Zheng, KY;Dong, J;Zeng, XQ;Ding, WJ .Precipitation and its effect on the mechanical properties of a cast Mg-Gd-Nd-Zr alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):44-54.
[37] Kentaro Yamada;Yoshiyuki Okubo;Masashi Shiono .Alloy Development of High Toughness Mg-Gd-Y-Zn-Zr Alloys[J].Materials transactions,2006(4):1066-1070.
[38] X.B. Liu;R.S. Chen;E.H. Han .Effects of ageing treatment on microstructures and properties of Mg-Gd-Y-Zr alloys with and without Zn additions[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):232-238.
[39] Ifeanyi Anthony Anyanwu;Shigeharu Kamado;Yo Kojima .Aging Characteristics and High Temperature Tensile Properties of Mg-Gd-Y-Zr Alloys[J].Materials transactions,2001(7):1206-1211.
[40] K. Yamada;H. Hoshikawa;S. Maki .Enhanced age-hardening and formation of plate precipitates in Mg-Gd-Ag alloys[J].Scripta materialia,2009(8):636-639.
[41] X. Gao;J.F. Nie .Enhanced precipitation-hardening in Mg-Gd alloys containing Ag and Zn[J].Scripta materialia,2008(8):619-622.
[42] C. R. Hutchinson;J. F. Nie;S. Gorsse .Modeling the Precipitation Processes and Strengthening Mechanisms in a Mg-Al-(Zn) AZ91 Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(8):2093-2105.
[43] M.R. Barnett .A rationale for the strong dependence of mechanical twinning on grain size[J].Scripta materialia,2008(7):696-698.
[44] Chino, Y;Kimura, K;Mabuchi, M .Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):481-488.
[45] S.-H. Choi;E.J. Shin;B.S. Seong .Simulation of deformation twins and deformation texture in an AZ31 Mg alloy under uniaxial compression[J].Acta materialia,2007(12):4181-4192.
[46] J. Koike;N. Fujiyama;D. Ando;Y. Sutou .Roles of deformation twinning and dislocation slip in the fatigue failure mechanism of AZ31 Mg alloys[J].Scripta materialia,2010(7):747-750.
[47] Proust, G;Tome, CN;Jain, A;Agnew, SR .Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31[J].International Journal of Plasticity,2009(5):861-880.
[48] S.-H. Choi;D.H. Kim;H.W. Lee;B.S. Seong;K. Piao;R.Wagoner .Evolution of the deformation texture and yield locus shape in an AZ31 Mg alloysheet under uniaxial loading[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):38-49.
[49] Z. Keshavarz;M. R. Barnett .EBSD analysis of deformation modes in Mg-3Al-1Zn[J].Scripta materialia,2006(10):915-918.
[50] S.-B. Yi;C.H J. Davies;H.-G. Brokmeier .Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading[J].Acta materialia,2006(2):549-562.
[51] Q. Yang;A.K. Ghosh .Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature[J].Acta materialia,2006(19):5159-5170.
[52] Li R G;Nie J F;Liu Q.Abnormal Relationship Between Hardness and Yield Strength in a Mg-14Gd-0.5Zr Alloy[J].Scripta Materialia,2011
[53] Li R G;Nie J F;Huang G J.Development of High Strength Magnesium Alloys via Combined Processes of Extrusion,Rolling and Ageing[J].Scripta Materialia,2011
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%