采用累积叠轧法(ARB)对Mg/Al多层板材进行高周期ARB变形,利用光学显微镜(OM)、扫描电子显微镜(SEM)和能谱仪(EDS)研究了Mg/Al多层板材在ARB变形过程中的微观组织,并在拉伸试验机上测试板材的室温抗拉强度并通过扫描电子显微镜(SEM)观察拉伸试验后的断口形貌.结果表明,随着叠轧周期数的增加,Mg/Al多层复合材料层界面处生成并长大的金属间化合物明显细化,该化合物会逐渐呈连续多层状分布,同时也提高了层界面的结合程度.不过,Mg/Al多层复合材料的抗拉强度在叠轧过程中却呈现出不规则的变化趋势.
参考文献
| [1] | Y. Kojima;S. Kamado .Fundamental Magnesium Researches in Japan[J].Materials Science Forum,2005(0):9-16. |
| [2] | F.H.Kavarana;K.S.Ravichandran .NANOSCALE STEEL-BRASS MULTILAYER LAMINATES MADE BY COLD ROLLING: MICROSTRUCTURE AND TENSILE PROPERTIES[J].Scripta materialia,2000(10):947-954. |
| [3] | Y.P. Li;G.P. Zhang;W. Wang;J. Tan;S.J. Zhu .On interface strengthening ability in metallic multilayers[J].Scripta materialia,2007(2):117-120. |
| [4] | Giguere A.;Hai NH.;Dempsey N.;Givord D. .Preparation of microstructured and nanostructured magnetic materials by mechanical deformation[J].Journal of Magnetism and Magnetic Materials,2002(1):581-584. |
| [5] | 胡小草,刁训刚,郝雷.大面积柔性基底TiO2/Ag/Ti/TiO2多层膜的制备及其光电和红外发射特性[J].稀有金属,2008(03):300-305. |
| [6] | Wadley H N G;Hsiung L M;Lankey R L .Artificially layered nanocomposites fabricated by jet vapor deposition[J].Composites Engineering,1995,5(07):935-945,947-950. |
| [7] | NabiRahni D M A;Tang P T;Leisner P .The electrolytic plating of compositionally modulated alloys and laminated metal nanostructures based on an automated computer-controlled dual-bath system[J].Nanotechnology,1996,7(02):134-143. |
| [8] | 于化顺.金属基复合材料及其制备技术[M].北京:化学工业出版社,2006 |
| [9] | Pérez P;Garcés G;Adeva P .Mechanical properties of a Mg-10 (vol.％)Ti composite[J].Composites Science and Technology,2004,64(01):145-151. |
| [10] | Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583. |
| [11] | 刘华赛,张滨,张广平.累积叠轧焊制备Al/AZ31多层复合材料及其强度[J].稀有金属,2009(02):285-289. |
| [12] | K. Wu;H. Chang;E. Maawad;W.M. Gan;H.G. Brokmeier;M.Y. Zheng .Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB)[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(13/14):3073-3078. |
| [13] | Liu H S;Zhang B;Zhang G P .Mierostructures and mechanical properties of A1/Mg qlloy multilayered composites produced by accumulative roll bonding[J].Journal of Materials Science & Technology,2011,27(01):15-21. |
| [14] | Chang, H.;Zheng, M.Y.;Xu, C.;Fan, G.D.;Brokmeier, H.G.;Wu, K..Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:249-256. |
| [15] | P.J. Hsieh;Y.P. Hung;J.C. Huang .Transformation into nanocrystalline or amorphous materials in Zr-X binary systems using ARB route[J].Scripta materialia,2003(2):173-178. |
| [16] | S. Ohsaki;S. Kato;N. Tsuji .Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process[J].Acta materialia,2007(8):2885-2895. |
| [17] | Chen I W;Winn E J;Menon M .Application of deformation instability to microstructural control in multilayer ceramic composites[J].Materials Science and Engineering A,2001,317(1-2):226-235. |
| [18] | Min G H;Lee J M;Kang S B et al.Evolution of microstructure for multilayered Al/Ni composites by accumulative roll-bonding process[J].Materials Letters,2006,60(27):3255-3259. |
| [19] | Rengang Zhang;Viola L. Acoff .Processing sheet materials by accumulative roll bonding and reaction annealing from Ti/Al/Nb elemental foils[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):67-73. |
| [20] | 黄光胜,汪凌云,黄光杰,潘复生.均匀化退火对AZ31B镁合金组织与性能的影响[J].重庆大学学报（自然科学版）,2004(11):18-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%