为了获得优良的深冲性能,通过变化冷轧压下率,研究了其对铁素体不锈钢显微组织,织构和深冲性能的演化规律.结果显示,随着冷轧压下率的增加,平均塑性应变比(r值)单调增加,这主要是因为退火织构{111}＜112＞强度的显著增加.另一方面,平面各向异性(△r值)随着压下率的增加先增加后减小,在冷轧压下率为80%时达到最小,冷轧压下率继续增加到90%时,退火织构的峰值逐渐偏离{111}织构,接近{223}＜582＞,△r值重新增大.
参考文献
| [1] | C.W. Sinclair;J.-D. Mithieux;J.-H. Schmitt .Recrystallization of Stabilized Ferritic Stainless Steel Sheet[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2005(11):3205-3215. |
| [2] | Yazawa Y;Kato Y;Kobayasbi M .Development of Ti-bearing high performance ferritic stainless steels R430XT and RSX-1[J].Kawasaki Steel Technical Report,1999,40:23-27. |
| [3] | Yoshihiro Yazawa;Yoshihiro Ozaki;Yasushi Kato;Osamu Furukimi .Development of ferritic stainless steel sheets with excellent deep drawability by (111} recrystallization texture control[J].JSAE review,2003(4):483-488. |
| [4] | Yoshihiro YAZAWA;Mineo MURAKI;Yasushi KATO;Oasmu FURUKIMI .Effect of Chromium Content on Relationship Between r-value and {111} Recrystallization Texture in Ferritic Steel[J].ISIJ International,2003(10):1647-1651. |
| [5] | Sinclair C W;Robaut F;Maniguet L et al.Recrystallization and texture in a ferritic stainless steel:an EBSD study[J].Advances in Engineering Materials,2003,5(08):570-574. |
| [6] | Ray R K;Jonas J J;Hook R E .Cold rolling and annealing textures in low carbon and extra low carbon steels[J].International Materials Reviews,1994,39(04):129-172. |
| [7] | E. Emadoddin;A. Akbarzadeh;Gh. Daneshi .Effect of cold rolling reduction and intercritical annealing temperature on the bulk texture of two TRIP-aided steel sheets[J].Journal of Materials Processing Technology,2008(1/3):293-300. |
| [8] | 王昭东,李自刚,何晓明,赵昆,张丕军,刘相华,王国栋.冷轧压下量对铁素体区热轧Ti-IF钢冷轧板的再结晶织构特点和深冲性能的影响[J].金属学报,2000(06):613-617. |
| [9] | Senuma T;Kawasaki K .Texture formation in Ti-bearing IF steel sheets throughout the rolling and annealing processes in terms of the influence of hot rolling conditions on deep drawability[J].ISIJ International,1994,34(01):51-60. |
| [10] | 毛卫民;赵新兵.金属的再结晶与晶粒长大[M].北京:冶金工业出版社,1994 |
| [11] | Raabe D;Lücke K .Influence of particles on recrystallization textures of ferritic stainless steels[J].Steel Research International,1992,63:457-464. |
| [12] | Doherty R D;Hughes D A;Humphreys F J et al.Current issues in recrystallization:a review[J].Materials Science and Engineering A,1997,238(02):219-274. |
| [13] | M. R. BARNETT .Formation of {111}<110> and {111}<112> Textures in Cold Rolled and Annealed IF Sheet Steel[J].ISIJ International,1999(9):923-929. |
| [14] | Huh M Y;Engler O .Effect of intermediate annealing on texture,formability and ridging of 17% Cr ferritic stainless steel sheet[J].Materials Science and Engineering A,2001,308(01):74-87. |
| [15] | Daniel D;Jonas J J .Measurement and prediction of plastic anisotropy in deep-drawing steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21(02):331-343. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%