以纳米α-Al2O3和Fe(NO3)3·9H2O为原料,采用非均相沉淀法制备了Fe包裹Al2O3的纳米复合粉体.经XRD、SEM分析发现:复合粉体前驱体经500 ℃焙烧,在H2中700 ℃还原可以得到纳米Fe包裹Al2O3的纳米复合粉体.粉体分散良好,Al2O3表面的纳米Fe粒子呈非连续状态,颗粒为球形,尺寸为30 nm左右,分布均匀.将复合粉体在热压下(30 MPa)烧结获得Al2O3/Fe复合陶瓷,当加入5mol%Fe时,陶瓷的热压烧结温度比单相Al2O3陶瓷降低将近100 ℃.含量为10mol%Fe的陶瓷样品在1500 ℃热压烧结后,断裂韧性可达到5.62 MPa,与相同条件下烧结的单相Al2O3陶瓷(KIc=3.57 MPa)相比提高了近57%.
参考文献
| [1] | Guichard J L;Tillement O;MoCellin A .Preparation and characteristic of alumina-iron cermets by hot-pressing nanocomosite powders[J].Materials Science,1997,32:4513-4521. |
| [2] | Harizanov O A;Stefchev P L;Iossifova A .Metal coated alumina powder for metalloceramics[J].Materials Letters,1998,33:297-299. |
| [3] | 张锐 .SiC/Cu金属陶瓷复合材料研究[D].中国科学院上海硅酸盐研究所,2004. |
| [4] | Lu J S;Gao L;Sun J .Effect of nickel content on the sintering behavior,mechanical and dielectric properties of Al2O3/Ni composites from coated powders[J].Materials Science and Engineering A,2000,A293:223-228. |
| [5] | Chia-Yi Yang;Wei-Heng Shih .Effect of acid on the coating of boehmite onto silicon carbide particles in aqueous suspensions[J].Journal of the American Ceramic Society,1999(2):436-440. |
| [6] | Lin YJ.;Jiang BF. .Sintering and phase evolution of electroless-nickel-coated alumina powder[J].Journal of the American Ceramic Society,1998(9):2481-2484. |
| [7] | Kapolnek D;De J C .Particulate composites from powders[J].Journal of the European Ceramic Society,1991,7:345-351. |
| [8] | 卢金山,高濂,归林华,郭景坤.Al2O3/Ni包裹粉体的制备、烧结行为及其显微结构研究[J].无机材料学报,2001(02):277-282. |
| [9] | 朱宝利;马淑龙;张利芳.纳米Al2TiO5包裹ZrO2复合粉体的制备及表征[A].,2008:135-138. |
| [10] | 师琦,吴素芳.沉淀法SiO2包覆纳米CaCO3吸附剂性能[J].化工学报,2009(02):507-513. |
| [11] | 郭铁明,陈辉,季根顺,马勤,周琦,贾建刚.Cu包裹MoSi2复合粉体的制备工艺[J].有色金属,2009(03):17-20. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%