考虑到铸件凝固过程中因潜热释放造成的数值计算结果难于收敛问题，建立基于等效比热法的反热传导模型，并分析模型中各种计算参数如阻尼系数μ、未来时间步长R、正热传导计算时的时间步长Δθ及收敛误差值Tcr等对反算求解结果稳定性及准确性的影响，应用所建立的反热导模型，通过铸件内温度数据计算得到A356铝合金与铜冷却介质间的界面换热系数。结果表明，界面换热系数是随铸件凝固时间变化的，其变化范围在1200~6200 W/(m2?K)之间，而且变化过程中因为结晶潜热的释放存在两个峰值。
In order to calculate the interfacial heat transfer coefficient (IHTC) with the latent heat released during the solidification of the molten, a model of inverse heat conduction based on the equivalent specific heat method was established. The effects of some parameters in the model on the stability and the accuracy of calculation results were also discussed. The parameters include the damping factor μ, the future time step R, the time step Δθ in the forward heat conduction calculation and the value of the iteration Tcr. The heat transfer coefficient of A356 Al alloy on copper chill is obtained by using the inverse heat conduction method based on the measured temperatures in the casting. And it is found that the IHTC varies with time during the casting solidification. The values are in the range of approximately 1 200-6 200 W/(m2?K) and two peak values exist because of the released latent heat.
参考文献
| [1] | WU Shi-ping,LI Chang-yun,GUO Jing-jie,SU Yan-qing,LEI Xiu-qiao,FU Heng-zhi.Numerical simulation and experimental investigation of two filling methods in vertical centrifugal casting[J].中国有色金属学会会刊（英文版）,2006(05):1035-1040. |
| [2] | Yogesh Jaluria .Challenges in the accurate numerical simulation of practical thermal processes and systems[J].International journal of numerical methods for heat and fluid flow,2013(1):158-175. |
| [3] | 杜凤山,张沛,许志强,赵玲玲.铝铸锭凝固边界热交换规律及温度场模拟[J].中国有色金属学报,2007(11):1750-1754. |
| [4] | BECK J V;BLACKWELL B;CLAIR C.Inverse heat conduction:Ill-posed problems[M].London:Wiley,1985:2-50. |
| [5] | BECK J V;WOODBURY K A .Inverse problems and parameter estimation:Integration of measurements and analysis[J].Measurement Science&Technology,1998,9:839-847. |
| [6] | 徐宏,侯华,赵宇宏,陈铮.铝铸件凝固模拟边界热交换系数的测定[J].中国有色金属学报,2003(04):881-886. |
| [7] | Iwona Nowak;Jacek Smolka;Andrzej J. Nowak .An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem[J].Applied thermal engineering: Design, processes, equipment, economics,2010(10):1140-1151. |
| [8] | Wen-Lih Chen;Yu-Ching Yang;Haw-Long Lee .Inverse problem in determining convection heat transfer coefficient of an annular fin[J].Energy Conversion & Management,2007(4):1081-1088. |
| [9] | M. A. Gafur;M. Nasrul Haque;K. Narayan Prabhu .Effect of chill thickness and superheat on casting/chill interfacial heat transfer during solidification of commercially pure aluminium[J].Journal of Materials Processing Technology,2003(3):257-265. |
| [10] | ZHANG L Q;LI L X .Determination of heat transfer coefficient at metal/chill interface in the casting solidification process[J].Heat and Mass Transfer,2013,49:1071-1080. |
| [11] | 郭志鹏,熊守美,(曹)尚铉,崔正吉.铝合金压铸过程铸件/铸型界面换热行为的研究Ⅰ实验研究和界面换热系数求解[J].金属学报,2007(11):1149-1154. |
| [12] | TIKHONOV A N;ARSENIN V Y.Solution of ill-posed problem[M].New York:Wiley,1977:2-10. |
| [13] | PRABHU K N;RAVISHANKAR B N .Effect of modification melt treatment on casting/chill interfacial heat transfer and electrical conductivity of Al-13% Si alloy[J].Materials Science and Engineering A,2003,360:293-298. |
| [14] | MARTORANO M A;CAPOCCHI J D T .Heat transfer coefficient at the metal-mold interface in the unidirectional solidification of Cu-8%Sn alloys[J].International Journal of Heat and Mass Transfer,2000,43:2541-2552. |
| [15] | Hsien-Chi Sun;Long-Sun Chao .Analysis of Interfacial Heat Transfer Coefficient of Green Sand Mold Casting for Aluminum and Tin-Lead Alloys by Using a Lump Capacitance Method[J].Journal of heat transfer: Transactions of the ASME,2007(4):595-600. |
| [16] | QI Le-hua,LIU Jian,GUAN Jun-tao,SU Li-zheng,ZHOU Ji-ming.Damage prediction for magnesium matrix composites formed by liquid-solid extrusion process based on finite element simulation[J].中国有色金属学报（英文版）,2010(09):1737-1742. |
| [17] | Yao Shan;Gong Xuena;Dai Lixin;Ma Chunying;Jin Junze;Abuliti Abudula .The Mathematical Model of Solidification Latent Heat under High Cooling Rate[J].Heat transfer Asian research,2006(2):115-121. |
| [18] | ?AHIN H M;KOCATEPE K;KAYIKCI R;AKAR N .Determination of unidirectional heat transfer coefficient during unsteady-state solidification at metal casting-chill interface[J].Energy Conversion & Management,2006,47:19-34. |
| [19] | THOMPSON S;COCKCROFT S L;WELLS M A .Advanced light metals casting development:Solidification of aluminum alloy A356[J].Materials Science and Technology,2004,20:194-200. |
| [20] | A. Fardi Ilkhchy;M. Jabbari;P. Davami .Effect of pressure on heat transfer coefficient at the metal/mold interface of A356 aluminum alloy[J].International Communications in Heat and Mass Transfer: A Rapid Communications Journal,2012(5):705-712. |
| [21] | 魏可臻,张奇.热电偶热传导测温中的动态响应时间和误差估计[J].测试技术学报,2007(06):523-526. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%