欢迎登录材料期刊网

材料期刊网

高级检索

通过实验测试研究了热烧结和退火后处理工艺对玻璃衬底碳纳米管薄膜(CNTF)场发射特性的影响,得到了低成本丝网印刷方法在玻璃衬底制备CNTF阴极的热烧结曲线, 250min热烧结过程包括2个升温阶段和3个恒温阶段,热烧结的最高温度为613K.结果表明,623K、15min是样品退火后处理的最佳条件,适宜的退火后处理使CNTF场发射趋于均匀.

参考文献

[1] Ijima S .Helical microtubes of graphitic carbon[J].Nature,1991,354:56.
[2] Valentin N Popov .Carbon nanotubes:properties and application[J].Materials Science and Engineering R:Reports,2004,43:61.
[3] Justin Gooding J .Nanostructuring electrodes with carbon nanotubes:A review on electrochemistry and applications for sensing[J].Electrochimica Acta,2005,50:3049.
[4] Yih-Ming Shyu et al.Low temperature growth and field emission of aligned carbon nanotubes by chemical vapor deposition[J].Materials Chemistry and Physics,2001,72:223.
[5] Zhu C C;Liu W H;Huangfu L J .Flat-panel structure for field-emission displays with carbon anotube cathode[J].J Vaccum Sci Techn B,2001,19(05):1691.
[6] Liu Xinghui;Zhu Changchun;Liu Weihua et al.Large-area carbon nanotubes film synthesized for field emission display by special CVD equipment and the field emission properties[J].Materials Chemistry and Physics,2005,93:473.
[7] Li Yukui;Zhu Changchun;Liu Xinghui .Field emission display with carbon nanotubes cathode: prepared by a screen-printing process[J].Diamond and Related Materials,2002(11):1845-1847.
[8] Zhang Xiuxia;Zhu Changchun.Field emission uniformity and stability of CNTs emitters on stainless steel[A].Oxford,UK,2005:270.
[9] Zhang Xiuxia;Zhu Changchun.The fabrication of novel structure of field emitting light tube with carbon nanotubes as cathode[A].Oxford,UK,2005:342.
[10] Zhang Xiuxia;Zhu Changchun .Field-emission lighting tube with CNT film cathode[J].Microelectronics Journal,2006,37:1358.
[11] 曾凡光,朱长纯,刘兴辉,刘卫华.用机械破碎方法提高印刷碳纳米管薄膜的场发射性能[J].西安交通大学学报,2005(08):863-866.
[12] Hofmeister W;Kang W P et al.Carbon nanotube growth from Cu-Co alloys for field emission applications[J].J Vaccum Sci Techn B,2004,22:1286.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%