大尺寸KDP(KH2PO4)晶体在切割过程中容易出现开裂现象,为了研究大尺寸KDP晶体切割过程中开裂机制并提出合理切割方案,本文对大尺寸KDP晶体切削效应进行了研究.大尺寸KDP晶体切削过程中刀片与晶体之间的接触应力和切割引起的热应力是晶体切削过程中主要致裂因素,因此本文采用有限元计算方法对KDP晶体切削过程进行热力耦合数值仿真模拟.结果表明切割过程中KDP晶体与刀片之间的压力应小于4.1 MPa,切口处温差应控制在4.2℃之内,同时本文还得到了切削过程可控参数(车床推进力和刀片的线速度)的安全取值范围,该范围的提出对KDP晶体的切割技术具有十分重要的意义.
参考文献
| [1] | Maunier C;Boochut P;Bouillet S et al.Growth and Characterizafion of Large KDP Crystals for High Power Lasers[J].Optical Materials,2007,30:88-90. |
| [2] | 张克从.晶体结构与其性能的关系及新晶体材料的发展[J].人工晶体,1986(02):146. |
| [3] | Mason W P .The Elastic,Piezoelectric,and Dielectric Constants of Potassium Dihydrogen Phosphate and Ammonium Dihydrogen Phosphate (in Chinese)[J].Physical Review,1946,69:171-194. |
| [4] | 张强勇,刘德军,王圣来,张宁,牟晓明,孙云.KDP晶体力学参数测试与分析[J].人工晶体学报,2009(06):1313-1319. |
| [5] | Cook W R .Thermal Expansion of Crystals with KH2 PO4 Structure[J].Journal of Applied Physics,1967,38:1637-1641. |
| [6] | Yasutaka Suemune .Thermal Conductivity of Some Ferroelectric Crystals with Hydrogen Bonds[J].Journal of the Physical Society of Japan,1967,22:735-739. |
| [7] | Amin M;Strukov B A .Effects of Deuteration on The Specific Heat of KH2PO4(KDP) Crystals[J].Soviet Physics,1972,14:885890. |
| [8] | 王景贺,陈明君,董申,张龙江.KDP晶体单点金刚石切削脆塑转变机理的研究[J].光电工程,2005(07):67-70,88. |
| [9] | Jun Zhao;Xijia Wu;Rong Liu .Finite element analysis of a notch root semi-elliptical crack in single crystal superalloy[J].Engineering Fracture Mechanics,2004(13/14):1873-1890. |
| [10] | C. Maunier;P. Bouchut;S. Bouillet;H. Cabane;R. Courchinoux;P. Defossez;J.-C. Poncetta;N. Ferriou-Daurios .Growth and characterization of large KDP crystals for high power lasers[J].Optical materials,2007(1):88-90. |
| [11] | 曹先锁,吴东江,王奔,高航,康仁科.KDP晶体各向异性力学特性分析[J].人工晶体学报,2008(03):704-709. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%