研究了热处理对TiNi合金回复稳定性能的影响。结果表明,马氏体相变温度Msσ和Mfσ随热机械循环次数增加而上升,而马氏体逆相变温度Asσ和Afσ随热机械循环次数的增加而下降。随着热机械循环次数的增加,相变温度逐步稳定。退火温度小于500℃,热机械循环下TiNi合金的回复性能稳定,退火温度达550℃时,TiNi合金组织长大,应力诱发马氏体变形时容易发生滑移,回复应变随热机械循环次数增加而下降,回复稳定性能变差。
Effects of heat treatment on stability of recovery properties of TiNi alloy were studied.The results show that Msσ and Mfσ increase with increasing number of thermo-mechanical cycles,while Asσ and Afσ decrease contrarily.The transformation temperatures become steady with increasing number of thermo-mechanical cycles.The stability of recovery properties is well with thermo-mechanical cycling when the heat treatment temperature is below 500 ℃.The grain of the TiNi alloy grows when the heat treatment temperature reaches 550 ℃.The coarse grain will be prone to slip during stress induced martensite deformation,and it will result in the decrease of recoverable strain with increasing number of thermo-mechanical cycles.
参考文献
| [1] | 贺志荣,王芳,周敬恩.TiNi合金的形状记忆效应及其工程应用研究进展[J].材料热处理学报,2005(05):21-27. |
| [2] | K.Otsuka;X.B.Ren .Recent developments in the research of shape memory alloys[J].Intermetallics,1999(5):511-528. |
| [3] | 杨冠军,杨华斌,曹继敏.我国形状记忆合金研究与应用的新进展[J].材料导报,2004(02):42-44. |
| [4] | 程秀兰,蔡炳初,徐东,王莉.形状记忆合金薄膜在微机电系统中的应用[J].功能材料,2002(06):594-597. |
| [5] | Wu SK.;Lin HC. .Recent development of TiNi-based shape memory alloys in Taiwan[J].Materials Chemistry and Physics,2000(2):81-92. |
| [6] | Wada, K;Liu, Y.Thermomechanical training and the shape recovery characteristics of NiTi alloys[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008:166-169. |
| [7] | C. N. Saikrishna;K. Venkata Ramaiah;S. K. Bhaumik .Effects of thermo-mechanical cycling on the strain response of Ni-Ti-Cu shape memory alloy wire actuator[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):217-224. |
| [8] | 王治国,祖小涛,吴继红,戴晶怡,傅平,杨树正.热机械训练影响TiNiCu记忆合金DSC曲线特征的研究[J].稀有金属材料与工程,2004(10):1052-1055. |
| [9] | Liu Y N;Yang I-I;Voigt A .Thermal analysis of the effect of aging on the transformation behaviour of Ti-50.9at.% Ni[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2003,360:350-355. |
| [10] | Uchil J.;Mahesh KK.;Kumara KG.;Mohanchandra KP. .Thermal and electrical characterization of R-phase dependence on heat-treat temperature in Nitinol[J].Physica, B. Condensed Matter,1998(1/2):83-89. |
| [11] | Khelfaoui F.;Thollet G.;Guenin G. .Microstructural evolution kinetics after plastic deformation of equiatomic Ti-Ni alloy during isothermal annealings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):305-312. |
| [12] | 李艳锋,米绪军,高宝东,尹向前.热处理对Ti-Ni合金显微组织和力学性能的影响[J].金属热处理,2009(08):40-43. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%