欢迎登录材料期刊网

材料期刊网

高级检索

在梯度升温和恒温两种模式下,对聚丙烯腈(PAN)纤维进行了热氧稳定化处理,借助FTIR、核磁共振碳谱(13 C-NMR)、元素分析(EA)、DSC、X-射线能谱(EDS)、密度等多种表征手段系统研究了不同温度下热氧稳定化纤维皮-芯结构的形成机制和氧元素的扩散速率。研究结果表明:氧化反应速率小于氧的扩散速率时,PAN纤维横截面外层与芯部差别较大,将出现皮-芯形貌结构特征;热氧稳定化纤维皮-芯结构的产生不但与温度有关,而且与升温模式密切相关;EDS表征方法可以有效地量化不同温度下,热氧稳定化纤维径向氧元素的扩散速率,同时可直观显示出氧在纤维截面不同区域的结合速率。

The gradient warming and isothermal oxidative stabilization of polyacrylonitrile(PAN) fibers were carried out,and the formation mechanism of skin-core structures and pervasion of oxygen elements of PAN fibers at different stabilization temperatures were investigated systematically by means of FTIR,13C-NMR,EA,DSC,energy dispersive analysis system of X-ray(EDS) and density.The study indicates that the lower the oxidation rate than the diffusion rate,the greater is the difference between outer and core of PAN fiber cross-section,and the morphologies of skin-core structure will appear on the cross-section simultaneously.The formation of skin-core structures of the preoxidized fibers is not only relevant to the temperature,but also highly relevant to the heating mode.By using EDS,the radial pervasion of oxygen elements of preoxidized fibers at different temperatures can be effectively quantified,the oxygen uptake on the different regions of the cross-section of stabilized fibers also can be visually displayed.

参考文献

[1] Liu J, Wang P H, Li R Y. Continuous carbonization of PAN-based oxidized fibers aspects on mechanical properties and morphological structure [J]. Journal of Applied Polymer Science, 1994, 52(2): 945-950.
[2] Wang P H, Liu J, Yue Z R, et al. Thermal oxidative stabilization of polyacrylonitrile precursor fiber-progression of morphological structure and mechanical properties [J]. Carbon, 1992, 30(1): 113-120.
[3] Liu Jie, Zhong Yueren, Fong Hao. Continuous nanoscale carbon fibers with superior mechanical strength [J]. Small, 2009, 5(5): 536-542.
[4] Gupta A. New aspect in the oxidative stabilization of PAN-based carbon fibers [J]. Carbon, 1996, 34(11): 1427-1431.
[5] Liu Jie, Tian Yuli, Chen Yujia, et al. A surface treatment technique of electrochemical oxidation to simultaneously improve the interfacial bonding strength and the tensile strength of PAN-based carbon fibers [J]. Materials Chemistry and Physics, 2010, 122(2/3): 548-555.
[6] Pandey G C, Kumar A. Determination of density of oxidized fiber by IR spectroscopy [J]. Polymer Testing, 2002, 21(4): 397-401.
[7] Lu Chunxiang, Wu Gangping, Lu Yonggen, et al. Study on oxidative stabilization of polya-crylonitrile fibers [J]. New Carbon Materials, 2003, 18(3): 186-190.
[8] Kikuma J, Konishi T, Sekine T. Polymer analysis by Auger electron spectroscopy using sectioning and cryogenic cooling [J]. Journal of Electron Spectroscopy, 1994, 69: 141-147.
[9] Kikuma J, Warwick T, Shin H J, et al. Chemical state analysis of heat-treated PAN fiber using soft X-ray spectromicroscopy [J]. Journal of Electron Spectroscopy, 1998, 94: 271-278.
[10] Yu Meijie, Wang Chengguo, Bai Yujun, et al. Effect of oxygen uptake and aromatization on the skin-core morphology during the oxidative stabilization of polyacrylonitrile fibers [J]. Journal of Applied Polymer Science, 2007, 107: 1939-1945.
[11] 刘 杰, 李 佳, 王 雷. 预氧化温度对聚丙烯睛纤维皮芯结构形成的影响 [J]. 北京化工大学学报, 2006, 33(1): 41-45.
[12] Liu Jie, Li Jia, et al. The evolution of the core-shell structure of polyacrylonitrile fibers during preoxidation [J]. New Carbon Materials, 2008, 23(2): 177-184.
[13] Liu Jie, Zhang Wangxi. Comparative study on structural changes during thermal PAN precursors [J]. Journal of Applied Polymer Science, 2005, 97: 2047-2053.
[14] Yu Meijie, Wang Chengguo, et al. Review on the thermal stabilization of PAN-based carbon fiber precursors [J]. Journal of Materials Engineering, 2006, 11: 63.
[15] 郭云霞, 刘 杰, 梁节英. 电化学改性对PAN基碳纤维表面状态的影响 [J]. 复合材料学报, 2005, 22(3): 49-54.
[16] Cai Yulan, Wang Dongwei. Characterization of native bamboo fiber using solid-state 13C-CP/MAS NMR spectroscopy [J]. Journal of Cellulose Science and Technology, 2009, 17(1): 1- 6..
[17] Wu G P, Lu C X, Ling L C, et al. Influence of tension on the oxidative stabilization process of polyacrylonitrile fibers [J]. Journal of Applied Polymer Science, 2005, 96(4): 1029-1034.
[18] Zhang W, Liu J, Wu G. Evolution of structure and properties of PAN precursors during their conversion to carbon fibers [J]. Carbon, 2003, 41(14): 2805-2812.
[19] Dobiáíová L, Star V, Glogar P, et al. Analysis of carbon fibers and carbon composites by asymmetric X-ray diffraction technique [J]. Carbon, 1999, 37(3): 421-425.
[20] Martin S C, Liggat J J, Snape C E. In situ NMR investigation into the thermal degradation and stabilization of PAN [J]. Polymer Degradation Stability, 2001, 74: 407-412.
[21] Zhang Wangxi, Liu Jie, Liang Jieying. New evaluation on the preoxidation extent of different PAN precursors [J]. Journal of Material Science and Technology, 2004, 20(4): 369-372.
[22] 刘 杰, 阳 武. 热氧稳定化过程中聚丙烯腈纤维序态结构的变化 [J]. 材料研究学报, 2007, 21(5): 487-490.
[23] Floro J A, Rossnagel S M, Robinoson R S. Ion-bombardment-induced whisker formation on graphite [J]. Journal of Vacuum Science and Technology, 1983, A1: 1398-1402.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%