对42CrMo钢在不同加热温度(850 ～1150℃)和保温时间(0 ～1200 s)下的奥氏体晶粒长大规律进行了研究.采用金相定量法对加热后材料的奥氏体晶粒度进行测量,建立42CrMo钢加热时奥氏体晶粒长大演化模型.结果表明:奥氏体晶粒尺寸随加热温度升高呈指数关系长大,随保温时间的延长呈近似抛物线形式长大;利用基于唯象理论的Sellars模型,通过非线性回归方法建立42CrMo钢加热时奥氏体晶粒长大演化模型;将该模型导入有限元软件中预报42CrMo钢加热时奥氏体晶粒变化,预报结果与实验结果吻合,验证了该模型的正确性.
参考文献
| [1] | 金桂香,王福明,李克非,付军,李长荣.82B高碳钢奥氏体晶粒长大行为[J].材料热处理学报,2013(07):41-46. |
| [2] | P. Palai;N. Prabhu;P. D. Hodgson;B. P. Kashyap .Grain Growth and β-Mg_(17)Al_(12) Intermetallic Phase Dissolution During Heat Treatment and Its Impact on Deformation Behavior of AZ80 Mg-Alloy[J].Journal of Materials Engineering and Performance,2014(1):77-82. |
| [3] | Y.JIN;M.BERNACKI;G.S.ROHRER.Formation of annealing twins during recrystallization and grain growth in 304L austenitic stainless steel[J].Materials Science Forum,2013:113-116. |
| [4] | Guo-Zheng Q;Yang W;Ying-Ying L et al.Effect of temperatures and strain rates on the average size of grains refined by dynamic recrystallization for as-extruded 42CrMo steel[J].Materials Research,2013,16(05):1092-1105. |
| [5] | 夏玉峰,赵磊,余春堂,权国政,周杰.42CrMo钢动态再结晶的临界条件[J].材料热处理学报,2013(04):74-79. |
| [6] | 权国政,石或,赵磊,毛远平,周杰.42CrMo钢热塑性变形诱导动态再结晶行为的动力学描述[J].材料热处理学报,2012(10):155-162. |
| [7] | 蔺永诚,陈明松,钟掘.42CrMo钢形变奥氏体的静态再结晶[J].中南大学学报（自然科学版）,2009(02):411-416. |
| [8] | 蔺永诚,陈明松,钟掘.42CrMo钢亚动态再结晶行为研究[J].材料热处理学报,2009(02):71-75. |
| [9] | 钟云龙,刘国权,刘胜新,刘长胜,李光,何岳,钱红宝,李洪德,江玉祥.新型油井管钢33Mn2V的奥氏体晶粒长大规律[J].金属学报,2003(07):699-703. |
| [10] | 毛卫民;赵新兵.金属的再结晶与晶粒长大[M].北京:冶金工业出版社,1994:236. |
| [11] | Devadas C;Samarasekera I V;Hawbolt E B .The thermal and metallurgical state of steel strip during hot rolling:Part Ⅲ.Microstructural evolution[J].Metallurgical Transactions A,1991,22(02):335-349. |
| [12] | Anelli E .Application trolled mathematical modeling to hot rolling and con-cooling of wire rods and bars of C-Mn[J].ISIJ International,1992,32:440-449. |
| [13] | 李立新,汪凌云,周家林,唐力.等温条件下晶粒长大模型研究[J].武汉科技大学学报(自然科学版),2002(04):335-336. |
| [14] | 温余远,鲁世强,刘俊伟,刘大博,刘天琦.基于Matlab的300M钢奥氏体晶粒的长大规律[J].材料热处理学报,2012(09):75-79. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%