欢迎登录材料期刊网

材料期刊网

高级检索

膜/基界面结合强度的测量与评价已成为硬质薄膜技术发展与应用的关键问题.提出了1种新的测量方法———激光冲击检测技术,分析了在脉冲激光作用下,薄膜脱落的机理与数学模型.以测定TiN薄膜界面结合强度为例,用650~1000 mJ的脉冲激光对膜层进行加载,并采用体式显微镜和扫描电镜对薄膜的脱落情况进行表面观察,根据反射信号检测法判别TiN薄膜的失效阈值.实验数据分析表明,测得膜/基界面的结合强度为4.954 GW/cm2,验证了该技术的可行性.

Measurement and evaluation of interfacial adhesion strength is one of the key questions for development and applications of hard film technology.This paper presents a new detection method of pulsed-laser shock technique,based on analyzing the mechanism and mathematical model of film separation under the action of pulsed-laser shock.Taking the measurment of the adhesion strength of TiN film as an example,the surface was impacted by pulsed-laser at the range of 650~1000 mJ,the surface topography of impact points was observed by style microscope and scanning electron microscope,and the TiN film failure threshold was identified by the reflected signal detection.The experimental results suggest that the film/substrate interfacial adhesion strength was 4.954 GW/cm2,which proves that the technique is feasible.

参考文献

[1] K.-D. Bouzakis;S. Gerardis;G. Katirtzoglou;S. Makrimallakis;A. Bouzakis;R. Cremer;H.-G. Fuss .Application in milling of coated tools with rounded cutting edges after the film deposition[J].CIRP Annals,2009(1 CD/ROM):61-64.
[2] Feng, W.;Zhou, H.;Yang, S.-Z. .Nano-indentation and wear-resistance behaviors of TiCN films by pulsed plasma on cemented carbide cutting tool[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(18/19):4767-4770.
[3] 柳翠,李国卿,苟伟,王丽阁,张成武,Sik-Chol Kwon,Jong-Joo Rha.90°弯管磁过滤阴极弧沉积类金刚石膜的特性分析[J].材料科学与工艺,2007(04):537-540.
[4] Neto VF;Vaz R;Ali N;Oliveira MSA;Gracio J .Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding[J].Journal of Materials Science,2008(10):3392-3399.
[5] Stock, HR;Diesselberg, M;Zoch, HW .Investigation of magnetron sputtered titanium-nickel-nitride thin films for use as mould coatings[J].Surface & Coatings Technology,2008(5/7):717-720.
[6] 赵升升,华伟刚,杜昊,宫骏,孙超,李家宝.一种测量硬质薄膜残余应力的新方法[J].金属学报,2008(01):125-128.
[7] 公衍生,涂溶,後藤孝.激光化学气相沉积快速生长高取向TiN_x薄膜的研究[J].无机材料学报,2010(04):391-395.
[8] Yu Xiang;Wang Cheng-biao;Liu Yang .A study of hard diamond-like carbon films in mid-frequency dual-magnetron sputtering[J].Diamond and Related Materials,2006(9):1223-1227.
[9] 张衡,郝天亮,石成儒,韩高荣.热丝化学气相沉积法在CH4/H2混合气体中低温生长超薄纳米金刚石膜[J].红外与毫米波学报,2006(02):81-85.
[10] Brand J;Gadow R;Killinger A .Application of diamond-like carbon coatings on steel tools in the production of precision glass components[J].Surface & Coatings Technology,2004(0):213-217.
[11] 朱守星,朱世根,季诚昌,丁建宁.DLC膜在磨损、表面改性及力电耦合作用下损伤特性[J].材料科学与工艺,2006(05):466-469.
[12] 蔡兰,周明,张永康.激光薄膜层裂技术的理论建模及相关诊析技术[J].江苏理工大学学报(自然科学版),2000(06):4.
[13] A.X. Feng;Y.K. Zhang;H.K. Xie;L. Cai;M. Zhou;Y.S. Liu .A Study on the New Method of Laser Scratch Testing Technique to Characterize Interfacial Adhesion Between Thin Film and Substrate[J].Key engineering materials,2004(259/260):615-619.
[14] Lev LC.;Argon AS. .SPALLATION OF THIN ELASTIC COATINGS FROM ELASTIC SUBSTRATES BY LASER INDUCED PRESSURE PULSES[J].Journal of Applied Physics,1996(1):529-542.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%