欢迎登录材料期刊网

材料期刊网

高级检索

以甲基丙烯酸甲酯(MMA)和丙烯酸甲酯(MA)为起始原料,过硫酸钾(KPS)为引发剂,1.5 wt%聚丙烯腈基碳纤维为增强相,采用悬浮聚合的方法,制备了碳纤维增强PMMA-PMA基复合材料(C_f/PMMA-PMA).研究了疲劳周期对C_f/PMMA-PMA复合材料抗弯强度的影响及其生物活性.采用X射线衍射分析(XRD)对复合材料的结构进行了表征,应用万能材料试验机测试了复合材料的抗弯强度,并利用扫描电子显微镜(SEM)对复合材料的断面显微形貌进行了分析.结果表明,在0~5000次的循环次数内,复合材料的抗弯强度没有显著变化,试样表面的受力处也没有出现裂纹等现象.随复合材料在模拟体液(SBF)中浸泡时间的延长,复合材料表面沉积的羟基磷灰石(HA)颗粒增多,说明复合材料具有良好的生物活性.此外,SBF的浸泡对C_f/PM-MA-PMA复合材料的力学性能几乎没有影响.

1.5 wt% carbon fiber (C_f) reinforced polymethyl methacrylate-polymethyl acrylate (PMMA-PMA) matrix composites were prepared by the suspension polymerization process with initiation reaction using methyl methacrylate (MMA) and methyl acrylate (MA) as raw materials, and potassium persulfate (KPS) as initiator. The effects on flexural strength and bioactivity of the prepared composites fatigue behavior were particularly investigated. The flexural strength, microstructures and phase composition of the composites were characterized by the universal testing machine, X-ray diffraction (XRD) and scanning electron microscope (SEM) analyses, respectively. The results show that the composites flexural strength displays no clear change and there are no cracks on the stress surface of the composites within 0~5000 cycles. The deposition of the hydroxyapatite particles increases with extending soaping time of C_f/PMMA-PMA composites dipping in simulated body fluid (SBF) solution, which shows that the prepared composites have good bioactivity. In addition, there is almost no influence on the mechanical performance of the composites when they are soaped in SBF solution.

参考文献

[1] 王慧宇,周萘,周何铤,等.碳纤维表面处理对生物骨水泥结合性能的影响[J].功能材料,2008,39(5):845-850.Wang Huiyu,Zhou Nai,Zhou Heting,et al.Preparation and combined properties investigation of porous bone-cement strengthened by carbon fibers[J].Journal of Functional Materials,2008,39(5):845-850.
[2] 李石保,陈朝辉,王忠义,等.聚甲基丙烯酸甲酯-氧化锆复合材料的制备[J].国防科技大学学报,2005,27(4):32-36.Li Shibao,Chen Zhaohui,Wang Zhongyi,et al.The preparation of PMMA-Zirconia composites[J].Journal of National University of Defense Technology,2005,27(4):32-36.
[3] Nagai E,Otani K,Suzuki S.Repair of denture base resin using woven metal and glass fiber;Effect of methylene chloride pretreatment[J].Prosthet Dent,2001,85(5):496-500.
[4] 程伏涛,吴其胜,魏无际.超细玻璃纤维改性PMMA骨水泥力学性能研究[J].材料科学与工艺,2009,17(1):92-95.Cheng Futao,Wu Qisheng,Wei Wuji.Mechanical properties of PMMA bone cement modified with ultra-fine glass fibers[J].Materials Science and Technology,2009,17(1):92-95.
[5] Doboer J,Vermilyea S G,Brady R E.The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins[J].Journal of Prosthetic Dentistry,1984,51(1):119-121.
[6] Marei M K.Reinforcement of denture base resin with glass fillers[J].Prosthodont,1999,8(1):18-26.
[7] 万涛,闫玉华,陈波,等.PMMA/HA-GF复合材料[J].中国有色金属学报,2002,12(5):935-939.Wan Tao,Yan Yuhua,Chen Bo,et al.Composite material for PMMA/HA-GF[J].The Chinese Journal of Nonferrous Metals,2002,12(5):935-939.
[8] 赵萍,孙康宁,朱广楠.碳纤维增强磷酸钙骨水泥复合材料[J].硅酸盐学报,2005,33(1):32-35.Zhao Ping,Sun Kangning,Zhu Guangnan.Composites of carbon fibers reinforced calcium phosphate bone cement[J].Journal of the Chinese Ceramic Society,2005,33(1):32-35.
[9] 李劲,李伟,范群,等.碳纤维单丝带对酚醛树脂基复合材料力学性能的增强作用[J].复合材料学报,2006,23(1):51-55.Li Jin,Li Wei,Fan Qun,et al.Reinforcing effect of separated carbon fiber tape on mechanical properties of phenolic resin composites[J].Acta Materiae Compositae Sinica,2006,23(1):51-55.
[10] 韩红梅,李贺军,张守阳,等.三维编织碳/碳复合材料的拉伸性能及损伤[J].机械科学与技术,2002,21(3):451-453.Han Hongmei,Li Hejun,Zhang Shouyang,et al.Tensile properties and damage evolution of 3-dimensional braided carbon/carbon composites[J].Mechanical Science and Technology,2002,21(3):451-453.
[11] Suresh S,Suresh Subra.Fatigue of materials[M].England:Cambridge University Press,1998:117-118.
[12] 徐耀祖.相变原理[M].北京:科学出版社,1988:78-95.
[13] 段友容,吕万新,王朝元,等.在动态模拟体液中致密CaP陶瓷表面形貌对类骨磷灰石层形成的影响研究[J].生物医学工程学杂志,2002,19(2):186-190.Duan Yourong,Lü Wanxin,Wang Chaoyuan,et al.Effects of surface morphology of calcium phosphate ceramics on apatite formation in dynamic SBF[J].Journal of Biomedical Engineering,2002,19(2):186-190.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%