本文分别采用考虑辐射重吸收的谱带辐射（SNBCK）模型及未考虑辐射重吸收的光学薄辐射（OPT）模型,对0.1～4 MPa,CO_2稀释比为0%和20%的一维预混层流合成气/空气火焰进行数值分析,研究辐射重吸收效应对可燃极限及极限处的火焰传播速度和温度的影响。结果表明,辐射重吸收效应能有效拓宽贫可燃极限,提高燃料中CO_2比例或提高CO/H_2比例都会加剧上述效果。辐射重吸收效应随压力增大而逐渐增强,并造成可燃极限处最大火焰温度随压力先增加后减小,在1 MPa左右达到峰值。
One-dimensional laminar premixed flames for CO/H_2/air mixtures were investigated numerically for a wide range of pressures with different CO_2 diluted ratios.Re-absorption-included radiation model called statistical narrow-band correlated-k（SNBCK）model and re-absorption-excluded radiation model called optically thin（OPT）model were used respectively in order to assess the impacts of re-absorption on flame behaviors near lean flammability limits.Results revealed that re-absorption extended lean flammability limits and these effects increased with increasing CO2 addition or ratios of CO/H_2.Effect of re-absorption strengthened as pressures increased.The maximum flames temperature at lean flammability limits increased first and then decreased with a peak value at near 10atm as pressures increased.
参考文献
| [1] | J. Natarajan;T. Lieuwen;J. Seitzman .Laminar flame speeds of H_2/CO mixtures: Effect of CO_2 dilution, preheat temperature, and pressure[J].Combustion and Flame,2007(1/2):104-119. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%